My Visual Studio 2005 Query Window reports the following error when
this query runs. Any idea what might be causing it? Thanks for any
help. I have tried subsitituing for the parameter a fixed number and
same error. I also have established it does connect and close properly
with my connection string.
[DB2/LINUX] SQL0952N Processing was cancelled due to an interrupt.
SQLSTATE=57014
SELECT F4211.SDITWT as grs_wgt, F5549110.BLDOCO as order_no,
F5549110.BLSRTX as prod_code,
F5549110.BLLOT1 as run_num, F5549110.BLLOTN as skid_num,
F5549110.BLZ55B SWT as bs_wgt,
F564108.IOZ55US R08 as id_barcode, F564108.IOZ55US R01 as width,
F564108.IOZ55US R03 as length,
F564108.IOZ55US R09 as desc1, F4211.SDVR01, F4211.SDVR02,
F5549110.BLSQOR , F5549110.BLITM, F5549110.BLUOM
FROM (PRODDTA.F55491 10 F5549110
LEFT OUTER JOIN PRODDTA.F4211 F4211
ON (F5549110.BLDOC O=F4211.SDDOCO)
AND (F5549110.BLLNI D=F4211.SDLNID) )
LEFT OUTER JOIN PRODDTA.F564108 F564108
ON ((F5549110.BLMC U=F564108.IOMCU )
AND (F5549110.BLITM =F564108.IOITM) )
AND (F5549110.BLLOT N=F564108.IOLOT N)
WHERE F5549110.BLDOCO =?
4  11194 
On 5 Mar 2007 08:45:44 -0800, "scorpion53 061"
<ke***********@ gmail.comwrote:
>My Visual Studio 2005 Query Window reports the following error when
this query runs. Any idea what might be causing it? Thanks for any
help. I have tried subsitituing for the parameter a fixed number and
same error. I also have established it does connect and close properly
with my connection string.
[DB2/LINUX] SQL0952N Processing was cancelled due to an interrupt.
SQLSTATE=570 14
SELECT F4211.SDITWT as grs_wgt, F5549110.BLDOCO as order_no,
F5549110.BLSRT X as prod_code,
F5549110.BLLOT 1 as run_num, F5549110.BLLOTN as skid_num,
F5549110.BLZ55 BSWT as bs_wgt,
F564108.IOZ55U SR08 as id_barcode, F564108.IOZ55US R01 as width,
F564108.IOZ55U SR03 as length,
F564108.IOZ55U SR09 as desc1, F4211.SDVR01, F4211.SDVR02,
F5549110.BLSQO R, F5549110.BLITM, F5549110.BLUOM
FROM (PRODDTA.F55491 10 F5549110
LEFT OUTER JOIN PRODDTA.F4211 F4211
ON (F5549110.BLDOC O=F4211.SDDOCO)
AND (F5549110.BLLNI D=F4211.SDLNID) )
LEFT OUTER JOIN PRODDTA.F564108 F564108
ON ((F5549110.BLMC U=F564108.IOMCU )
AND (F5549110.BLITM =F564108.IOITM) )
AND (F5549110.BLLOT N=F564108.IOLOT N)
WHERE F5549110.BLDOCO =?
=============== =============== =============== =========
db2 =? sql952
SQL0952N Processing was cancelled due to an interrupt.
Explanation:
The user may have pressed the interrupt key sequence.
The statement processing is terminated. Some changes may have
been applied to the database, but not committed, before
termination occurred.
Federated system users: this situation can also be detected by
the data source.
User Response:
Continue the application.
If installing the sample database, drop it and install the
sample database again.
sqlcode : -952
sqlstate : 57014
=============== =============== =============== =========
I'd guess a timeout. An outer join on an outer join may take a few
minutes. If you can, run the query in the CLP first to verify it is
running. If it takes a while, you may need to adjust the timeout value
of you DB connection object.
B.
On Mar 5, 11:00 am, Brian Tkatch <N/Awrote:
On 5 Mar 2007 08:45:44 -0800, "scorpion53 061"
<kellyjmart...@ gmail.comwrote:
My Visual Studio 2005 Query Window reports the following error when
this query runs. Any idea what might be causing it? Thanks for any
help. I have tried subsitituing for the parameter a fixed number and
same error. I also have established it does connect and close properly
with my connection string.
[DB2/LINUX] SQL0952N Processing was cancelled due to an interrupt.
SQLSTATE=57014
SELECT F4211.SDITWT as grs_wgt, F5549110.BLDOCO as order_no,
F5549110.BLSRTX as prod_code,
F5549110.BLLOT1 as run_num, F5549110.BLLOTN as skid_num,
F5549110.BLZ55B SWT as bs_wgt,
F564108.IOZ55US R08 as id_barcode, F564108.IOZ55US R01 as width,
F564108.IOZ55US R03 as length,
F564108.IOZ55US R09 as desc1, F4211.SDVR01, F4211.SDVR02,
F5549110.BLSQOR , F5549110.BLITM, F5549110.BLUOM
FROM (PRODDTA.F55491 10 F5549110
LEFT OUTER JOIN PRODDTA.F4211 F4211
ON (F5549110.BLDOC O=F4211.SDDOCO)
AND (F5549110.BLLNI D=F4211.SDLNID) )
LEFT OUTER JOIN PRODDTA.F564108 F564108
ON ((F5549110.BLMC U=F564108.IOMCU )
AND (F5549110.BLITM =F564108.IOITM) )
AND (F5549110.BLLOT N=F564108.IOLOT N)
WHERE F5549110.BLDOCO =?
=============== =============== =============== =========
db2 =? sql952
SQL0952N Processing was cancelled due to an interrupt.
Explanation:
The user may have pressed the interrupt key sequence.
The statement processing is terminated. Some changes may have
been applied to the database, but not committed, before
termination occurred.
Federated system users: this situation can also be detected by
the data source.
User Response:
Continue the application.
If installing the sample database, drop it and install the
sample database again.
sqlcode : -952
sqlstate : 57014
=============== =============== =============== =========
I'd guess a timeout. An outer join on an outer join may take a few
minutes. If you can, run the query in the CLP first to verify it is
running. If it takes a while, you may need to adjust the timeout value
of you DB connection object.
B.- Hide quoted text -
- Show quoted text -
Thank you for yoru help. I ran it with ConnectionTimeo ut set to 0 in
connections string and same error returned.
Althou, this last part doesn't violate syntax.
.......
ON ((F5549110.BLMC U=F564108.IOMCU )
AND (F5549110.BLITM =F564108.IOITM) )
AND (F5549110.BLLOT N=F564108.IOLOT N)
WHERE F5549110.BLDOCO =?
It might be worth to try to rewrite as following.
.......
ON ((F5549110.BLMC U=F564108.IOMCU )
AND (F5549110.BLITM =F564108.IOITM)
AND (F5549110.BLLOT N=F564108.IOLOT N))
WHERE F5549110.BLDOCO =?
On 5 Mar 2007 09:19:23 -0800, "scorpion53 061"
<ke***********@ gmail.comwrote:
>On Mar 5, 11:00 am, Brian Tkatch <N/Awrote:
>On 5 Mar 2007 08:45:44 -0800, "scorpion53 061"
<kellyjmart... @gmail.comwrote :
>My Visual Studio 2005 Query Window reports the following error when
this query runs. Any idea what might be causing it? Thanks for any
help. I have tried subsitituing for the parameter a fixed number and
same error. I also have established it does connect and close properly
with my connection string.
>[DB2/LINUX] SQL0952N Processing was cancelled due to an interrupt.
SQLSTATE=570 14
>SELECT F4211.SDITWT as grs_wgt, F5549110.BLDOCO as order_no,
F5549110.BLSRT X as prod_code,
F5549110.BLLOT 1 as run_num, F5549110.BLLOTN as skid_num,
F5549110.BLZ55 BSWT as bs_wgt,
F564108.IOZ55U SR08 as id_barcode, F564108.IOZ55US R01 as width,
F564108.IOZ55U SR03 as length,
F564108.IOZ55U SR09 as desc1, F4211.SDVR01, F4211.SDVR02,
F5549110.BLSQO R, F5549110.BLITM, F5549110.BLUOM
FROM (PRODDTA.F55491 10 F5549110
LEFT OUTER JOIN PRODDTA.F4211 F4211
ON (F5549110.BLDOC O=F4211.SDDOCO)
AND (F5549110.BLLNI D=F4211.SDLNID) )
LEFT OUTER JOIN PRODDTA.F564108 F564108
ON ((F5549110.BLMC U=F564108.IOMCU )
AND (F5549110.BLITM =F564108.IOITM) )
AND (F5549110.BLLOT N=F564108.IOLOT N)
WHERE F5549110.BLDOCO =?
============== =============== =============== ==========
db2 =? sql952
SQL0952N Processing was cancelled due to an interrupt.
Explanation:
The user may have pressed the interrupt key sequence.
The statement processing is terminated. Some changes may have
been applied to the database, but not committed, before
termination occurred.
Federated system users: this situation can also be detected by
the data source.
User Response:
Continue the application.
If installing the sample database, drop it and install the
sample database again.
sqlcode : -952
sqlstate : 57014
============== =============== =============== ==========
I'd guess a timeout. An outer join on an outer join may take a few
minutes. If you can, run the query in the CLP first to verify it is
running. If it takes a while, you may need to adjust the timeout value
of you DB connection object.
B.- Hide quoted text -
- Show quoted text -
Thank you for yoru help. I ran it with ConnectionTimeo ut set to 0 in
connections string and same error returned.
Is it returned at a specific time?
Visual Studio has its own timeout value. It is a property of the
database object. Specifically, set that one.
B. This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics | |
by: Dirk Försterling |
last post by:
Hi all,
a few days ago, I upgraded from PostgreSQL 7.2.1 to 7.4, following
the instructions in the INSTALL file, including dump and restore.
All this worked fine without any error (message).
Since then, I found lots of the following in the postmaster output:
2003-11-29 15:19:54 ERROR: large object 4838779 does not exist
2003-11-29 15:20:11 ERROR: large object 4838779 does not exist
|
by: Rhino |
last post by:
I've written several Java stored procedures now (DB2 V7.2) and I'd like to
write down a few "best practices" for reference so that I will have them
handy for future development.
Would the experts here agree with the following? Would they add any other
points?
1. If the shop standard calls for logging of application errors, a stored
procedure should log any error that it encounters immediately upon detecting
it and then return to the...
|
by: Karl |
last post by:
Exception EDBEngineError in module Cserv.exe at 0013E2C8.
General SQL error.
SQL0727N An error occurred during implicit
system action type "1". Information returned for the
error includes SQLCODE "-101", SQLSTATE "54001" and message tokens "".
SQLSTATE=56098.
I get the above error when using an application that performs an insert
into a DB2 table. I added a new Trigger to the table. There are a few
triggers on the table. I do not...
|
by: Peter Frost |
last post by:
Please help
I don't know if this is possible but what I would really like to do is
to use On Error Goto to capture the code that is being executed when
an error occurs.
Any help would be much appreciated.
Thanks in advance
|
by: Squirrel |
last post by:
I have a command button on a subform to delete a record.
The only statement in the subroutine is:
DoCmd.RunCommand acCmdDeleteRecord
The subform's recordsource is "select * from tblVisit order by VisitDt"
I'm getting this error message:
Errno is 2465. Err.description is "Can't find field '|' referred to in your
expression"
| | |
by: amitbadgi |
last post by:
HI i am getting the foll error while conv an asp application to
asp.net
Exception Details: System.Runtime.InteropServices.COMException: Syntax
error in UPDATE statement.
Source Error:
Line 112: MM_editCmd.ActiveConnection = MM_editConnection
Line 113: MM_editCmd.CommandText = MM_editQuery
Line 114: MM_editCmd.Execute
|
by: Charles Wilt |
last post by:
I have a IBM iSeries (aka AS-400) running v5r3 of OS/400 that I access
via a linked server from SQL Server 2000.
The following select works fine:
select * from prod400db.test.meldbf.InventoryHistory
However, this insert statement fails:
insert into prod400db.TEST.MELDBF.InventoryHistory
|
by: mchuc7719 |
last post by:
Hello,
I have a Vb.Net 2005 ClassLibrary, when I try to compile using MSBee, only
get errors.
Before I to run the command line, I open in notepad the .vbproj and I was
add the next line:
Target CoreCompile:
C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\Vbc.exe
|
by: redashley40 |
last post by:
This is my first attempt in SQL and PreparedStatement
I have add the PreparedStatement and I'm not to sure if I'm doing it correctly.
When I do a test run on Choose 1 ,or 2 I get this error.
Error - com.mysql.jdbc.Statement
here is my code below
public class DBAssign {
/**
|
by: kimiraikkonen |
last post by:
Hi,
I want to find out if there's difference between "On Error Resume
Next" error handler and leaving "catch" block empty in a try-catch-end
try block to ignore exceptions which i don't approve of course but
just needed to ask.
Thanks
|
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look !
Part I. Meaning of...
| | |
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
|
by: Hystou |
last post by:
Overview:
Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
|
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
| | |
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
|
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
| |
