473,568 Members | 2,795 Online
Bytes | Software Development & Data Engineering Community
+ Post

Home Posts Topics Members FAQ

Installing InfoCenter on local drive

I have a question or two about the Info Center. I'm running DB2 (LUW)
Personal (Developer's) Edition Version 8 (FP8) on Windows XP.

I just reinstalled DB2 V8 (FP7) and applied FP8 immediately afterwards.
During the install process, I said that I wanted to the InfoCenter to be
installed on my hard drive (standalone PC) rather than using the default
URL to access it via the Internet. However, when I launch the Info Center,
it is using the Internet URL to access it rather than getting it from my
hard drive.

Has anyone else had this same experience? I'm wondering if this is a known
misbehaviour of the installation process.

I looked in the Info Center for information on how to install the Info
Center on my hard drive and saw a recommendation that I not do this because
*some* (unspecified) versions of Windows could not run the Info Center.
Does anyone know if Windows XP supports the Info Center? It seems unlikely
to me that XP would not support the Info Center but it might explain why
the installation failed to follow my instructions.

I'd prefer to have the Info Center on my hard drive for two reasons:
- it should be faster
- I'll still be able to access the manuals if my Internet connection is not
working

--
Henry

Nov 12 '05 #1
2 2171
In article <f0************ ********@news20 .bellglobal.com >, Henry
Reardon (He************ *****@hotmail.c om) says...

The info center update can be downloaded seperately from the IBM
site, if you install it locally it will change your settings to point
to the local information center. On W2K This worked without a
problem.
Nov 12 '05 #2
Gert van der Kooij <ge**@invalid.n l> wrote in
news:MP******** *************** *@news.xs4all.n l:
In article <f0************ ********@news20 .bellglobal.com >, Henry
Reardon (He************ *****@hotmail.c om) says...

The info center update can be downloaded seperately from the IBM
site, if you install it locally it will change your settings to point
to the local information center. On W2K This worked without a
problem.

Thanks Gert! If it worked on W2K it seems very unlikely it wouldn't work in
XP. I assume that the Info Center only fails in the oldest versions of
Windows, like Win 95 and Win 98. I guess I'll find out for sure when I try
it!
--
Henry

Nov 12 '05 #3

This thread has been closed and replies have been disabled. Please start a new discussion.

Similar topics

3
3625
by: Robert Tarantino | last post by:
Hello, I am trying to find a way to create a scheduled task or service that will copy my local profile folders under "Documents and settings" to a network drive. This would allow me to restore my settings if my profile became tampered with or corrupt. Is there any sample code available out there? -Robert
2
15212
by: Ken Lindner | last post by:
I have a need to become familiar with SQL Server 2000 for work. Needless to say I am new to SQL Server any version, but not IT in general. My employer has provided me with the SQL Server 2000 Personal disk from the SQL Server 2000 Enterprise kit as this is reported here on the MSDN web site to be the version that is supported on Windows XP. ...
3
4096
by: jaggi | last post by:
Hi all, I downloaded DB2 enterprise edition from partnerworld on ibm.com and unzipped and untarred it and copied it to CD and tried installing on AIX using SMIT. I am getting errors while installing DB2. they seems like related to java or dependent on java. Is there anyone who has faced some problem installing DB2? Do i have to install Java...
10
4355
by: Ed Stevens | last post by:
A tale of woe, and a question . . . Last week my boss said to me "we've installed DB2 Connect on this Solaris box. Make it work." Now, I've barely seen DB2 Connect on Windows, having fumbled thru one install and config, with a lot of handholding from IBM Support. I'm comfortable in unix but have never dealt with DB2 Connect there. (my...
1
2354
by: Leonid | last post by:
Hello I have VC++ .NET 2003 ATL Server project. In one of its method I need to write some information in a local txt file. This txt file and this ATL Server are on the same ‘C: \’ drive. When I tried it I just get ERROR_ACCESS_DENIED error from GetLastError function. What do I need to modify to let this ATL Server to write on local hard...
1
1728
by: steveBelfast | last post by:
Having trouble installing my 180 day Visual Studio 2005 trial disk. The CD that was sent is actually a DVD not a CD. My home PC only has a CD drive. I attempted to install on an external drive using a work PC with a DVD drive and then use the external drive from my home PC. Unfortunately the install process puts files on the hard drive of the...
13
6625
by: dancer | last post by:
I have made a new post because when I try to respond to another, I get the error, "Article Rejected -- Ill-formed message id" This is in response to the advice of Juan Libre to install Net Framework Service Pack 1 in order to use ASP.net 1.1 and the net Framework 1.1...
1
1387
by: Carl Johansson | last post by:
I think I'm going nuts! I have a perfectly fine exe assembly built with Microsoft Visual C# 2008 Express Edition. When executed from my local hard drive it runs as exactly as expected. However, when trying to launch it from a network drive it just won't run. One suggestion I saw was to start the "Microsoft .NET Framework 1.1 Wizards" and run...
4
1770
by: =?Utf-8?B?anAybXNmdA==?= | last post by:
I created a setup.exe/setup.msi installer using Visual Studio for my C# application, then copied it over to the network for others to use. It installs fine and the application works like it is supposed to. However, whenever someone then launches the app from the shortcut that I had my setup application placed on the desktop, it looks like...
0
7693
marktang
by: marktang | last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main...
0
7604
by: Hystou | last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it. First, let's disable language...
0
7916
Oralloy
by: Oralloy | last post by:
Hello folks, I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>". The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed. This is as boiled down as I can make it. ...
0
8117
jinu1996
by: jinu1996 | last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that...
0
6275
agi2029
by: agi2029 | last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then...
0
5217
by: conductexam | last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one. At the time of converting from word file to html my equations which are in the word document file was convert...
0
3631
by: adsilva | last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
1
2101
by: 6302768590 | last post by:
Hai team i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
1
1207
muto222
by: muto222 | last post by:
How can i add a mobile payment intergratation into php mysql website.

By using Bytes.com and it's services, you agree to our Privacy Policy and Terms of Use.

To disable or enable advertisements and analytics tracking please visit the manage ads & tracking page.