Hi everyone, I've just installed VisualStudio 2008 on my dev PC. I use
this PC to compile a program that uses MapPointControl .ocx.
I've compile a new version of my program using VS 2005 after
installing VS2008. When I run this program in VisualStudion 2005, I
can see the MapPoint Map. When I run this program on a Windows XP
computer, it also works. When I run the program on Windows Vista, I
get an error from the .NET framework (2.0) saying there was an unknown
error.
Now, I know this problem is created when I compile.
The problem persist even when targeting x86 plateform.
Finally, when I tried to create a new project in VisualStudio 2008 and
adding MapPoint control to it, it never worked.
Has anyone else notice that kind of problems ? 1 3518
I have the same problem on Vista, since I installed VS2008.
No solution found yet
"wizmagiste r" wrote:
Hi everyone, I've just installed VisualStudio 2008 on my dev PC. I use
this PC to compile a program that uses MapPointControl .ocx.
I've compile a new version of my program using VS 2005 after
installing VS2008. When I run this program in VisualStudion 2005, I
can see the MapPoint Map. When I run this program on a Windows XP
computer, it also works. When I run the program on Windows Vista, I
get an error from the .NET framework (2.0) saying there was an unknown
error.
Now, I know this problem is created when I compile.
The problem persist even when targeting x86 plateform.
Finally, when I tried to create a new project in VisualStudio 2008 and
adding MapPoint control to it, it never worked.
Has anyone else notice that kind of problems ? This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics |
by: anon |
last post by:
Hi,
I have just installed the micorsoft's mappoint .net sdk....how to start
using the samples.....has anyone successfully gone through the entire
cycle of installation to implementation...if yes, could you please help
me by providing some sample code n pointers to get started.....i have
hopelessly searched online for tutorials but found nothing......also wat
is the difference between mappoint .net and the mappoint 2004 which cost
around...
|
by: deko |
last post by:
I have an address form in Access 2003 that contains the usual address
information such as AddressLine1, AddressLine2, City, State, etc... I would
like to put a button on this form that feeds the address info into MapPoint,
along with a fixed return address, and gets driving directions - or at least
get a map of the destination.
I have the MapPoint software, but have not used it. Will MapPoint provide
driving directions, or just a map? ...
|
by: Kath |
last post by:
Hi,
I hope this is the most relevant newsgroup for this post.
I have a VB.NET app that uses the MapPoint component, and in my app I use
pushpins to display/retrieve GPS locations. Occasionally, when I call:
objMap.Distance(locNorthPole, locX)
my code catches an exception that's raised, the exception is:
|
by: Joe Withawk |
last post by:
I have a solution consisting of a c# project as win application and a c++
project as classlibrary. Both are .net 2.0
The classlibrary handles some loading of quicktime movies, but that should
not be relevant.
On my development machine I build the exe and dll and run the exe which has
a reference to the dll. At some point it uses featured in the dll.
This works fine.
Then I copy my exe and dll to the target system and when the featured...
|
by: mazdotnet |
last post by:
Hi guys,
On my work computer I had VisualStudio 2005, AJAX 1.0 and AJAX
toolkit
installed. 2 days ago I installed VisualStudio 2008 and every AJAX
test that I do (IIS), does a postback. When I open my test web
application using File System which uses the .NET server
(http://localhost:4791/AjaxTest2/) it works. However, when I open my
files by using IIS (http://localhost/AjaxTest2/), my application runs
fine except it does a post back...
| |
by: Academia |
last post by:
I was told that SqlServer express should get installed when VS2008Pro is
installed (that is it is on the same DVD).
I had a couple of errors during vs2008's installation and I don't see any
signs of sqlserver.
Is SqlServer Express suppose to get installed when VS2008 Pro is installed?
Or should I download SqlServer and installed it that way?
|
by: Scott Gravenhorst |
last post by:
Windows XP SP3
My application is set to open a SaveFile dialog when an exit is
requested. When I click the app's close button, the save dialog
opens, but when I click to change the folder, the exception occurs
pointing to FileSaveDialog1.ShowDialog(). The exception also
indicates some problem with system.drawing.dll.
The exception text is:
"Attempted to read or write protected memory. This is often an
|
by: Frank Hauptlorenz |
last post by:
Hello out there,
I changed an existing and good working webservice from an wsHttpBinding
to an NetTcpBinding.
This is working (after trying some time) and has real a better performance!
But one thing is strange: when I'm now actualising the web reference
from within VS2008, VS2008
creates a 2nd endpoint config in my app.conf.
The endpoint is exactly the same as the existing but the name and
|
by: =?Utf-8?B?c2hhd3NoYW5r?= |
last post by:
I have two weird problems with my C3 application with a Mappoint2006 (North
America) windows form control. It compiles fine with vs2005 and it runs on my
PC (win xp) as well. But whenever I tried to migrate the application to a
different system:
(1) For PCs (all have MS MP 2006 NA installed) also in North America, the
application runs but fails at the first mappoint function call of
"MapPoint.GetLocation()", complaining "Unable to cast...
|
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look !
Part I. Meaning of...
|
by: jinu1996 |
last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth.
The Art of Business Website Design
Your website is...
| |
by: Hystou |
last post by:
Overview:
Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: conductexam |
last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one.
At the time of converting from word file to html my equations which are in the word document file was convert into image.
Globals.ThisAddIn.Application.ActiveDocument.Select();...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
|
by: adsilva |
last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
| |
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
| |