Hi over there,
We are a team of 6 developping web applications
(ASP.Net/C#/VB.Net/SQLServer). What happens is that randomly, each of us
get the below error in (PS). We believe that the "acess is denied" error
description [probably] is a "dummy message" b/c the file name changes the
very next time we compile for no reasons. (we think that it didn't have any
reason in the first place b/c no changes of any kind were done to it or to
the files/modules which are accessing it)
Sometime after adding all the permission possible to that file (dll), that
may make it to work with a chance of 10%,
sometime we can restart www service and it may work with very low chances,
sometime a rebuild of the solution may make it to work (low probability too)
and
sometime we delete references (of our build in house dlls) then add them
back may make it to work (low chances to work).......... ...
but sometime we can spend hours to figure out and only a reboot will make it
to work.
For certain, the only thing that makes it to work for sure is a reboot.
The error shows up very frequently (every 30 mins). This is very time
consuming for each of us we really can't link it to anything in our project
as a cause of the problem.
Anyhelp or idea is very much appreciated,
Thank you in advance,
Genc Ymeri
Sr. Developer
Workflow Systems,
Reston VA
PS
Description: An error occurred during the processing of a configuration file
required to service this request. Please review the specific error details
below and modify your configuration file appropriately.
Parser Error Message: Access is denied: 'ANameSpace.Dll FileName'. (e.g
Windows.Encript .Dll, MyCompanyAAssem bly.dll)
Source File:
c:\windows\micr osoft.net\frame work\v1.1.4322\ Config\machine. config Line:
198
Assembly Load Trace: The following information can be helpful to determine
why the assembly 'MyComp.Securit y' could not be loaded.
=== Pre-bind state information ===
LOG: DisplayName = Bravera.Securit y
(Partial)
LOG: Appbase = file:///C:/Inetpub/wwwroot/wwwRAPID
LOG: Initial PrivatePath = bin
Source Error:
Line 196: <add assembly="Syste m.EnterpriseSer vices, Version=1.0.500 0.0,
Culture=neutral , PublicKeyToken= b03f5f7f11d50a3 a"/>
Line 197: <add assembly="Syste m.Web.Mobile, Version=1.0.500 0.0,
Culture=neutral , PublicKeyToken= b03f5f7f11d50a3 a"/>
Line 198: <add assembly="*"/>
Line 199: </assemblies>
Line 200: </compilation>
--------------------------------------------------------------------------------
Version Information: Microsoft .NET Framework Version:1.1.432 2.2300;
ASP.NET Version:1.1.432 2.2300 5  1499 
I get those errors from time to time when I rebuild two solutions at a time
and they happen to share a project. Sometimes solution A rebuilds the
shared project first, and then goes on to another project in the solution,
in the meantime, solution B is rebuilding and rebuilds the shared project,
so the solution A rebuild complains because it cannot access the shared
project exactly when it needs it.
This may also happen if you guys are all building with a shared output
directory.
Other than in this scenario, I have not seen this error.
"genc_ymeri " <ge********@hot mail.com> wrote in message
news:_a******** *************** *******@adelphi a.com... Hi over there,
We are a team of 6 developping web applications
(ASP.Net/C#/VB.Net/SQLServer). What happens is that randomly, each of us
get the below error in (PS). We believe that the "acess is denied" error
description [probably] is a "dummy message" b/c the file name changes the
very next time we compile for no reasons. (we think that it didn't have
any
reason in the first place b/c no changes of any kind were done to it or to
the files/modules which are accessing it)
Sometime after adding all the permission possible to that file (dll), that
may make it to work with a chance of 10%,
sometime we can restart www service and it may work with very low chances,
sometime a rebuild of the solution may make it to work (low probability
too)
and
sometime we delete references (of our build in house dlls) then add them
back may make it to work (low chances to work).......... ...
but sometime we can spend hours to figure out and only a reboot will make
it
to work.
For certain, the only thing that makes it to work for sure is a reboot.
The error shows up very frequently (every 30 mins). This is very time
consuming for each of us we really can't link it to anything in our
project
as a cause of the problem.
Anyhelp or idea is very much appreciated,
Thank you in advance,
Genc Ymeri
Sr. Developer
Workflow Systems,
Reston VA
PS
Description: An error occurred during the processing of a configuration
file
required to service this request. Please review the specific error details
below and modify your configuration file appropriately.
Parser Error Message: Access is denied: 'ANameSpace.Dll FileName'. (e.g
Windows.Encript .Dll, MyCompanyAAssem bly.dll)
Source File:
c:\windows\micr osoft.net\frame work\v1.1.4322\ Config\machine. config
Line:
198
Assembly Load Trace: The following information can be helpful to determine
why the assembly 'MyComp.Securit y' could not be loaded.
=== Pre-bind state information ===
LOG: DisplayName = Bravera.Securit y
(Partial)
LOG: Appbase = file:///C:/Inetpub/wwwroot/wwwRAPID
LOG: Initial PrivatePath = bin
Source Error:
Line 196: <add assembly="Syste m.EnterpriseSer vices, Version=1.0.500 0.0,
Culture=neutral , PublicKeyToken= b03f5f7f11d50a3 a"/>
Line 197: <add assembly="Syste m.Web.Mobile, Version=1.0.500 0.0,
Culture=neutral , PublicKeyToken= b03f5f7f11d50a3 a"/>
Line 198: <add assembly="*"/>
Line 199: </assemblies>
Line 200: </compilation>
--------------------------------------------------------------------------------
Version Information: Microsoft .NET Framework Version:1.1.432 2.2300;
ASP.NET Version:1.1.432 2.2300
We have a single solutions, two projects, pretty straight forward the first
one create a dll, the second one use it as reference and the project
dependeces are set properly. Any idea how to get rid of it ?????
Thanks a lot in advance,
Genc Ymeri
"Gabriel Magaña" <no*****@no-spam.com> wrote in message
news:uo******** ******@tk2msftn gp13.phx.gbl... I get those errors from time to time when I rebuild two solutions at a time
and they happen to share a project. Sometimes solution A rebuilds the
shared project first, and then goes on to another project in the solution,
in the meantime, solution B is rebuilding and rebuilds the shared project,
so the solution A rebuild complains because it cannot access the shared
project exactly when it needs it.
This may also happen if you guys are all building with a shared output
directory.
Other than in this scenario, I have not seen this error.
"genc_ymeri " <ge********@hot mail.com> wrote in message
news:_a******** *************** *******@adelphi a.com... Hi over there,
We are a team of 6 developping web applications
(ASP.Net/C#/VB.Net/SQLServer). What happens is that randomly, each of us
get the below error in (PS). We believe that the "acess is denied" error
description [probably] is a "dummy message" b/c the file name changes
the
very next time we compile for no reasons. (we think that it didn't have
any
reason in the first place b/c no changes of any kind were done to it or
to
the files/modules which are accessing it)
Sometime after adding all the permission possible to that file (dll),
that
may make it to work with a chance of 10%,
sometime we can restart www service and it may work with very low
chances,
sometime a rebuild of the solution may make it to work (low probability
too)
and
sometime we delete references (of our build in house dlls) then add them
back may make it to work (low chances to work).......... ...
but sometime we can spend hours to figure out and only a reboot will make
it
to work.
For certain, the only thing that makes it to work for sure is a reboot.
The error shows up very frequently (every 30 mins). This is very time
consuming for each of us we really can't link it to anything in our
project
as a cause of the problem.
Anyhelp or idea is very much appreciated,
Thank you in advance,
Genc Ymeri
Sr. Developer
Workflow Systems,
Reston VA
PS
Description: An error occurred during the processing of a configuration
file
required to service this request. Please review the specific error
details
below and modify your configuration file appropriately.
Parser Error Message: Access is denied: 'ANameSpace.Dll FileName'. (e.g
Windows.Encript .Dll, MyCompanyAAssem bly.dll)
Source File:
c:\windows\micr osoft.net\frame work\v1.1.4322\ Config\machine. config Line:
198
Assembly Load Trace: The following information can be helpful to
determine
why the assembly 'MyComp.Securit y' could not be loaded.
=== Pre-bind state information ===
LOG: DisplayName = Bravera.Securit y
(Partial)
LOG: Appbase = file:///C:/Inetpub/wwwroot/wwwRAPID
LOG: Initial PrivatePath = bin
Source Error:
Line 196: <add assembly="Syste m.EnterpriseSer vices, Version=1.0.500 0.0,
Culture=neutral , PublicKeyToken= b03f5f7f11d50a3 a"/>
Line 197: <add assembly="Syste m.Web.Mobile, Version=1.0.500 0.0,
Culture=neutral , PublicKeyToken= b03f5f7f11d50a3 a"/>
Line 198: <add assembly="*"/>
Line 199: </assemblies>
Line 200: </compilation>
--------------------------------------------------------------------------------
Version Information: Microsoft .NET Framework Version:1.1.432 2.2300;
ASP.NET Version:1.1.432 2.2300
Are you guys compiling at the same time to the same output directory?
"genc_ymeri " <ge********@hot mail.com> wrote in message
news:Oc******** ************@ad elphia.com... We have a single solutions, two projects, pretty straight forward the
first one create a dll, the second one use it as reference and the project
dependeces are set properly. Any idea how to get rid of it ?????
Thanks a lot in advance,
Genc Ymeri
"Gabriel Magaña" <no*****@no-spam.com> wrote in message
news:uo******** ******@tk2msftn gp13.phx.gbl...I get those errors from time to time when I rebuild two solutions at a
time and they happen to share a project. Sometimes solution A rebuilds
the shared project first, and then goes on to another project in the
solution, in the meantime, solution B is rebuilding and rebuilds the
shared project, so the solution A rebuild complains because it cannot
access the shared project exactly when it needs it.
This may also happen if you guys are all building with a shared output
directory.
Other than in this scenario, I have not seen this error.
"genc_ymeri " <ge********@hot mail.com> wrote in message
news:_a******** *************** *******@adelphi a.com... Hi over there,
We are a team of 6 developping web applications
(ASP.Net/C#/VB.Net/SQLServer). What happens is that randomly, each of
us
get the below error in (PS). We believe that the "acess is denied"
error
description [probably] is a "dummy message" b/c the file name changes
the
very next time we compile for no reasons. (we think that it didn't have
any
reason in the first place b/c no changes of any kind were done to it or
to
the files/modules which are accessing it)
Sometime after adding all the permission possible to that file (dll),
that
may make it to work with a chance of 10%,
sometime we can restart www service and it may work with very low
chances,
sometime a rebuild of the solution may make it to work (low probability
too)
and
sometime we delete references (of our build in house dlls) then add them
back may make it to work (low chances to work).......... ...
but sometime we can spend hours to figure out and only a reboot will
make it
to work.
For certain, the only thing that makes it to work for sure is a reboot.
The error shows up very frequently (every 30 mins). This is very time
consuming for each of us we really can't link it to anything in our
project
as a cause of the problem.
Anyhelp or idea is very much appreciated,
Thank you in advance,
Genc Ymeri
Sr. Developer
Workflow Systems,
Reston VA
PS
Description: An error occurred during the processing of a configuration
file
required to service this request. Please review the specific error
details
below and modify your configuration file appropriately.
Parser Error Message: Access is denied: 'ANameSpace.Dll FileName'. (e.g
Windows.Encript .Dll, MyCompanyAAssem bly.dll)
Source File:
c:\windows\micr osoft.net\frame work\v1.1.4322\ Config\machine. config Line:
198
Assembly Load Trace: The following information can be helpful to
determine
why the assembly 'MyComp.Securit y' could not be loaded.
=== Pre-bind state information ===
LOG: DisplayName = Bravera.Securit y
(Partial)
LOG: Appbase = file:///C:/Inetpub/wwwroot/wwwRAPID
LOG: Initial PrivatePath = bin
Source Error:
Line 196: <add assembly="Syste m.EnterpriseSer vices, Version=1.0.500 0.0,
Culture=neutral , PublicKeyToken= b03f5f7f11d50a3 a"/>
Line 197: <add assembly="Syste m.Web.Mobile, Version=1.0.500 0.0,
Culture=neutral , PublicKeyToken= b03f5f7f11d50a3 a"/>
Line 198: <add assembly="*"/>
Line 199: </assemblies>
Line 200: </compilation>
--------------------------------------------------------------------------------
Version Information: Microsoft .NET Framework Version:1.1.432 2.2300;
ASP.NET Version:1.1.432 2.2300
> Are you guys compiling at the same time to the same output directory?
No, everyone one of us has his own copy (from VSS) and output directories
for the projects are different..... 2nd projecy has a reference to the
output of the first one.
"Gabriel Magaña" <no*****@no-spam.com> wrote in message
news:%2******** ********@tk2msf tngp13.phx.gbl. .. Are you guys compiling at the same time to the same output directory?
"genc_ymeri " <ge********@hot mail.com> wrote in message
news:Oc******** ************@ad elphia.com... We have a single solutions, two projects, pretty straight forward the
first one create a dll, the second one use it as reference and the
project dependeces are set properly. Any idea how to get rid of it ?????
Thanks a lot in advance,
Genc Ymeri
"Gabriel Magaña" <no*****@no-spam.com> wrote in message
news:uo******** ******@tk2msftn gp13.phx.gbl...I get those errors from time to time when I rebuild two solutions at a
time and they happen to share a project. Sometimes solution A rebuilds
the shared project first, and then goes on to another project in the
solution, in the meantime, solution B is rebuilding and rebuilds the
shared project, so the solution A rebuild complains because it cannot
access the shared project exactly when it needs it.
This may also happen if you guys are all building with a shared output
directory.
Other than in this scenario, I have not seen this error.
"genc_ymeri " <ge********@hot mail.com> wrote in message
news:_a******** *************** *******@adelphi a.com...
Hi over there,
We are a team of 6 developping web applications
(ASP.Net/C#/VB.Net/SQLServer). What happens is that randomly, each of
us
get the below error in (PS). We believe that the "acess is denied"
error
description [probably] is a "dummy message" b/c the file name changes
the
very next time we compile for no reasons. (we think that it didn't have
any
reason in the first place b/c no changes of any kind were done to it or
to
the files/modules which are accessing it)
Sometime after adding all the permission possible to that file (dll),
that
may make it to work with a chance of 10%,
sometime we can restart www service and it may work with very low
chances,
sometime a rebuild of the solution may make it to work (low probability
too)
and
sometime we delete references (of our build in house dlls) then add
them
back may make it to work (low chances to work).......... ...
but sometime we can spend hours to figure out and only a reboot will
make it
to work.
For certain, the only thing that makes it to work for sure is a reboot.
The error shows up very frequently (every 30 mins). This is very time
consuming for each of us we really can't link it to anything in our
project
as a cause of the problem.
Anyhelp or idea is very much appreciated,
Thank you in advance,
Genc Ymeri
Sr. Developer
Workflow Systems,
Reston VA
PS
Description: An error occurred during the processing of a configuration
file
required to service this request. Please review the specific error
details
below and modify your configuration file appropriately.
Parser Error Message: Access is denied: 'ANameSpace.Dll FileName'. (e.g
Windows.Encript .Dll, MyCompanyAAssem bly.dll)
Source File:
c:\windows\micr osoft.net\frame work\v1.1.4322\ Config\machine. config
Line:
198
Assembly Load Trace: The following information can be helpful to
determine
why the assembly 'MyComp.Securit y' could not be loaded.
=== Pre-bind state information ===
LOG: DisplayName = Bravera.Securit y
(Partial)
LOG: Appbase = file:///C:/Inetpub/wwwroot/wwwRAPID
LOG: Initial PrivatePath = bin
Source Error:
Line 196: <add assembly="Syste m.EnterpriseSer vices, Version=1.0.500 0.0,
Culture=neutral , PublicKeyToken= b03f5f7f11d50a3 a"/>
Line 197: <add assembly="Syste m.Web.Mobile, Version=1.0.500 0.0,
Culture=neutral , PublicKeyToken= b03f5f7f11d50a3 a"/>
Line 198: <add assembly="*"/>
Line 199: </assemblies>
Line 200: </compilation>
--------------------------------------------------------------------------------
Version Information: Microsoft .NET Framework Version:1.1.432 2.2300;
ASP.NET Version:1.1.432 2.2300
Hmm, you mentioned ASP.NET... VS2005 has a big bug where files in the /bin
folder get checked into version control... If any of your developers have
checked dlls into the /bin directory that might explain your problem
(because once checked in, they are marked as read-only which causes all
sorts of problems).
If you do have /bin files mistakenly checked in, you can just delete them
off source control.
"genc_ymeri " <ge********@hot mail.com> wrote in message
news:sO******** *************** *******@adelphi a.com... Are you guys compiling at the same time to the same output directory?
No, everyone one of us has his own copy (from VSS) and output directories
for the projects are different..... 2nd projecy has a reference to the
output of the first one.
"Gabriel Magaña" <no*****@no-spam.com> wrote in message
news:%2******** ********@tk2msf tngp13.phx.gbl. .. Are you guys compiling at the same time to the same output directory?
"genc_ymeri " <ge********@hot mail.com> wrote in message
news:Oc******** ************@ad elphia.com... We have a single solutions, two projects, pretty straight forward the
first one create a dll, the second one use it as reference and the
project dependeces are set properly. Any idea how to get rid of it ?????
Thanks a lot in advance,
Genc Ymeri
"Gabriel Magaña" <no*****@no-spam.com> wrote in message
news:uo******** ******@tk2msftn gp13.phx.gbl...
I get those errors from time to time when I rebuild two solutions at a
time and they happen to share a project. Sometimes solution A rebuilds
the shared project first, and then goes on to another project in the
solution, in the meantime, solution B is rebuilding and rebuilds the
shared project, so the solution A rebuild complains because it cannot
access the shared project exactly when it needs it.
This may also happen if you guys are all building with a shared output
directory.
Other than in this scenario, I have not seen this error.
"genc_ymeri " <ge********@hot mail.com> wrote in message
news:_a******** *************** *******@adelphi a.com...
> Hi over there,
> We are a team of 6 developping web applications
> (ASP.Net/C#/VB.Net/SQLServer). What happens is that randomly, each of
> us
> get the below error in (PS). We believe that the "acess is denied"
> error
> description [probably] is a "dummy message" b/c the file name changes
> the
> very next time we compile for no reasons. (we think that it didn't
> have any
> reason in the first place b/c no changes of any kind were done to it
> or to
> the files/modules which are accessing it)
>
> Sometime after adding all the permission possible to that file (dll),
> that
> may make it to work with a chance of 10%,
> sometime we can restart www service and it may work with very low
> chances,
> sometime a rebuild of the solution may make it to work (low
> probability too)
> and
> sometime we delete references (of our build in house dlls) then add
> them
> back may make it to work (low chances to work).......... ...
>
> but sometime we can spend hours to figure out and only a reboot will
> make it
> to work.
>
> For certain, the only thing that makes it to work for sure is a
> reboot.
>
> The error shows up very frequently (every 30 mins). This is very time
> consuming for each of us we really can't link it to anything in our
> project
> as a cause of the problem.
>
> Anyhelp or idea is very much appreciated,
> Thank you in advance,
> Genc Ymeri
> Sr. Developer
> Workflow Systems,
> Reston VA
>
>
> PS
>
>
> Description: An error occurred during the processing of a
> configuration file
> required to service this request. Please review the specific error
> details
> below and modify your configuration file appropriately.
>
> Parser Error Message: Access is denied: 'ANameSpace.Dll FileName'. (e.g
> Windows.Encript .Dll, MyCompanyAAssem bly.dll)
>
>
> Source File:
> c:\windows\micr osoft.net\frame work\v1.1.4322\ Config\machine. config
> Line:
> 198
>
> Assembly Load Trace: The following information can be helpful to
> determine
> why the assembly 'MyComp.Securit y' could not be loaded.
>
> === Pre-bind state information ===
> LOG: DisplayName = Bravera.Securit y
> (Partial)
> LOG: Appbase = file:///C:/Inetpub/wwwroot/wwwRAPID
> LOG: Initial PrivatePath = bin
>
>
>
>
> Source Error:
>
>
> Line 196: <add assembly="Syste m.EnterpriseSer vices,
> Version=1.0.500 0.0,
> Culture=neutral , PublicKeyToken= b03f5f7f11d50a3 a"/>
> Line 197: <add assembly="Syste m.Web.Mobile, Version=1.0.500 0.0,
> Culture=neutral , PublicKeyToken= b03f5f7f11d50a3 a"/>
> Line 198: <add assembly="*"/>
> Line 199: </assemblies>
> Line 200: </compilation>
>
>
>
> --------------------------------------------------------------------------------
> Version Information: Microsoft .NET Framework Version:1.1.432 2.2300;
> ASP.NET Version:1.1.432 2.2300
>
>
>
This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics | |
by: Jon Combe |
last post by:
I have created the following test SQL code to illustrate a real
problem I have with some SQL code.
CREATE TABLE JCTable ( CustomerName varchar(50) )
ALTER TABLE JCTable ADD CustomerNo int
INSERT INTO JCTable ( CustomerName , CustomerNo ) VALUES ( 'Jon Combe'
, 1 )
INSERT INTO JCTable ( CustomerName , CustomerNo ) VALUES ( 'Bill
Gates' , 1 )
UPDATE JCTable SET CustomerNo = 2 WHERE CustomerName = 'Jon Combe'
|
by: FireStarter |
last post by:
Guys, in the code that follows, why does the method F() still compile, even if
DBG is undefined? Inside method G(), the code inside <#if DBG> does not compile
(notice that I can write whatever I want in there, I will not receive a
compilation error). I do get such an error in F() - because of the garbage I
intentionally put there - but F() should not compile in the first place.
Am I misusing this attribute?!
#undef DBG
|
by: Tommy Vercetti |
last post by:
In Visual Studio .NET 2003, I do the following
1) File->New->Project
2) Visual C++ Projects->.NET->Windows Forms Application
3) Project->Add New Item->C++ File
4) Clear the new C++ file and replace with the two lines:
#include "stdafx.h"
#include <vcclr.h>
5) Build->Build Solution
I get the following compilation errors:
|
by: James Zhuo |
last post by:
hi all
I changed the name of the class LoginPage to a different
name "LoginPageOne" But the same error gets generated with
the Wiliam.Request.LoginPageOne. That pretty much leaves
me clueless at this point.
Please help
Cheer
|
by: Kevin O'Donovan |
last post by:
Hi,
Is anyone else experiencing this, or better yet, have a fix for it:
We have VS.Net 2003 from the MSDN Universal subscription installed on 3
workstations. We have about 10 or so projects ranging from a handful of
forms to 50 or so. On all but the smallest projects there will be some forms
or user controls which display this problem. What happens is that whenever
you are editing the code for the affected object, a number of things...
| | |
by: Garmt de Vries-Uiterweerd |
last post by:
X-posted to opera.page-authoring, because this is a bit Opera-specific for
the moment. F'up to ciwas.
I am playing around with dedicated styling for the projection media type..
Currently the only browser to support it is Opera, which uses projection
when in full-screen mode.
On a website I maintain (http://www.jules-verne.nl/), I have set up some
special styles for projection. Not that this specific website really needs
it, but...
|
by: David Thole |
last post by:
Hey all,
I'm still very new at all this, but am going through the ASP.net 2.0
unleashed book, first chapter and trying to program my own little form
emailer for fun. I tried following the code for their version in the
book to the best of my abiltiies, and came across issues, mostly that a
type was expected when trying to compile in MS Visual Studio 2002.
When my stuff wasn't working at all, I decided to try just using his
code almost...
|
by: mwelsh1118 |
last post by:
Why doesn't C# allow incremental compilation like Java?
Specifically, in Java I can compile single .java files in isolation.
The resulting individual .class files can be grouped into .jar files.
In C#, there appears to be no analog. I have to compile all my .cs
files into a single .dll.
This has serious drawbacks in terms of compilation. With Eclipse, I
change a file and only that file is re-compiled. With Visual Studio, I
|
by: BSand0764 |
last post by:
I'm getting an error that I can't seem to resolve. When I compile the
Functor related logic in a test program, the files compile and execute
properly (see Listing #1).
However, when I incorporate the same logic within my simulation, the
class that implements the functor logic has problems compiling. I get
the following errors:
-- Building myTest.cpp --
|
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look !
Part I. Meaning of...
|
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed.
This is as boiled down as I can make it.
Here is my compilation command:
g++-12 -std=c++20 -Wnarrowing bit_field.cpp
Here is the code in...
| | |
by: Hystou |
last post by:
Overview:
Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
|
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
|
by: adsilva |
last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
| | |
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
| |
