c# - Automatically displaying SubReports in New Tab Pages

Master.Shankar

Hello Friends,
I am working on a C# windows Application which generates a crystal
report . There is a subreport embedded in the main report . I want this
subreport to open automatically in a new tab when the main report is
generated and displayed. As of now , since it is an OnDemand report, it
displays a link for the sub report clicking on which will open the sub
report in a new tab page.I dont want to have the report as an OnDemand
report . Is it possible to open the SubReport automatically in a new
tab page without having to click on the link?
I would really appreciate any help.

regards

Nov 17 '05 #1

Subscribe Reply

2033

avnrao

why was it made as a ondemand subreport, if it can be shown as standalone
report? ondemand subreports should be used only if you need to display that
subreport in details section and in the main report some kind of summary
information.
if you need to display the ondemand subreport in another tab, wouldnt that
subreport be for any specific entity from your main report?

you can still show in a separte tab as you are showing your main report, but
you need to refer that subreport directly.

"Ma************ @gmail.com" wrote:

Hello Friends,
I am working on a C# windows Application which generates a crystal
report . There is a subreport embedded in the main report . I want this
subreport to open automatically in a new tab when the main report is
generated and displayed. As of now , since it is an OnDemand report, it
displays a link for the sub report clicking on which will open the sub
report in a new tab page.I dont want to have the report as an OnDemand
report . Is it possible to open the SubReport automatically in a new
tab page without having to click on the link?
I would really appreciate any help.

regards

Nov 17 '05 #2

Shankar

Dear Avnrao,
Thank you for your reply.
The subreport we generate contains the details of the Business orders
listed in the main report.In other words, every entry in the main report
will be detailed in the subreport. Now the end users want the subreport
to be opened in a seperate tab with the main report . Assuming that the
subreport is generated as a seperate report, how will i display that in
a different tab together with the main report ?.
Kinldy let me know where i should look for to solve this problem .
thank you once again for your reply.
regards

SS

--
Sent via .NET Newsgroups
http://www.dotnetnewsgroups.com

Nov 17 '05 #3

Similar topics

1970

combining subreports based on conditions

by: Anne | last post by:

I have a report containing multiple subreports (approximately 37 subreports) that are based on individual queries. The query calls to only display the subreport if there is valid data in the table (that the subreport is based on). Because the subreport may not always appear, there are spaces in between the subreports that do contain valid data. Is there any way to resize or reformat the main report so all subreports with valid data...

Microsoft Access / VBA

2130

Opening subreports with dates

by: Don Sealer | last post by:

I have a report that includes 5 different subreports. I'd like to be able to open this report using a date function (Start Date and End Date). I'd like all five subreports to show the data from those dates. I have learned how to use this start/end function but I can't figure out how to use it with these subreports. Right now the report opens but asks for start/end dates for each of the five reports. Is there a way I can input one set of...

Microsoft Access / VBA

2735

MS Access 2003 - automatically create reports/subreports based on criteria

by: neoteny2 | last post by:

I need MS Access to automatically create reports/subreports based on specific criteria. I am building a database in Access 2003 with different locations/sites. I have the "sites" table created containing site info, including an empty field for "date". I also have a report format already created displaying the site info. I need Access to ask the user for a date, calculate three additional dates using the entered date (adding or subtracting...

Microsoft Access / VBA

1670

Subreport displaying unwanted value

by: manojtjain | last post by:

I have a report which has 3 subreports included within it, each separated by a page break. So totally 4 pages are generated for the report. The second page shows an unwanted value in Left Hand Top Corner. This value is present in Right Hand Top Corner, for display purpose. The Left Hand Top Corner is empty, and yet it shows this value. There is nothing beyond the margins that would spill over on the next page. Surprising part is that...

Microsoft Access / VBA

6475

Two Subreports in one Report - Redundant Data

by: baool | last post by:

I have a report that keeps track of sales by company for any given month within a year. I am using two subreports embedded within a report to produce 2006 (one subreport) and 2007 (the other subreport) sales by station for any month I choose. The report works but I have two issues: 1) The subreports are located in the detail section of the report. The report should be three pages long but the report keeps repeating the data for a total of...

Microsoft Access / VBA

12407

Subreport not displaying

by: Coll | last post by:

I have a report that I run every quarter. When I opened it this quarter, one of the subreports is not displaying. No error message - just nothing displays where the subreport data should be. If you run the subreport on its own, it displays fine. It just won't display on the main report. I tried deleting and readding the subreport. No luck. There are other subreports on the main one and they are acting fine. Any ideas? (Using Access 2000)....

Microsoft Access / VBA

2871

Crystal Subreports

by: Franck | last post by:

Ok i have a problem. What do i need to change to make crystal show subreport within subreports ? So i have 3 layer The MainReport Multiple SubReport Attached in the MainReport Multiple SubSubReport Attached in the SubReports Showing the SubReport itself by bypassing the MainReport the SubSubREport are showing

C# / C Sharp

5456

Force multiple subreports data to print on main report

by: Brett Barry: Go Get Geek! | last post by:

Hello, I have a main report with a Record Source, a DateToday table, that has the current Month and Year. I have about 60 queries, each pulling different data via ODBC, that I am creating subreports that go on the main report. The problem is that when I run the report the data shows on the screen but not the print preview. I am aware that the main report is not linked to the subreports because of the Link Master, Child Fields issue....

Microsoft Access / VBA

1408

Printing SubReports

by: DThreadgill | last post by:

Hi all! I have one Main Report with 6 subreports. The titles for these subreports are all in the detail section of the Main report above each subreport and the headers of each subreport is in the report header section. My question: When viewing or printing the report, is there a way to get the headers to also print on the next page if the subreport spans two pages? Thanks in advance!

Microsoft Access / VBA

9480

Changing the language in Windows 10

by: Hystou | last post by:

Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it. First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...

Windows Server

10313

Problem With Comparison Operator <=> in G++

by: Oralloy | last post by:

Hello folks, I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>". The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed. This is as boiled down as I can make it. Here is my compilation command: g++-12 -std=c++20 -Wnarrowing bit_field.cpp Here is the code in...

C / C++

10080

The easy way to turn off automatic updates for Windows 10/11

by: Hystou | last post by:

Overview: Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...

Windows Server

7494

Access Europe - Using VBA to create a class based on a table - Wed 1 May

by: isladogs | last post by:

The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM). In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules. He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms. Adolph will...

Microsoft Access / VBA

6735

Couldn’t get equations in html when convert word .docx file to html file in C#.

by: conductexam | last post by:

I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one. At the time of converting from word file to html my equations which are in the word document file was convert into image. Globals.ThisAddIn.Application.ActiveDocument.Select();...

C# / C Sharp

5378

Trying to create a lan-to-lan vpn between two differents networks

by: TSSRALBI | last post by:

Hello I'm a network technician in training and I need your help. I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs. The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols. I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...

Networking - Hardware / Configuration

5511

Windows Forms - .Net 8.0

by: adsilva | last post by:

A Windows Forms form does not have the event Unload, like VB6. What one acts like?

Visual Basic .NET

4044

transfer the data from one system to another through ip address

by: 6302768590 | last post by:

Hai team i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system

C# / C Sharp

3643

How to add payments to a PHP MySQL app.

by: muto222 | last post by:

How can i add a mobile payment intergratation into php mysql website.

PHP