Using C++ DLL in C# (cant view methods or structs)

[Mas L via DotNetMonster.com]

Hi,

I have a c++ source code which I can compile to be a DLL (in VS.NET 2003).
And I need to use it in a C# program.

After I compiled/build the C++ code to a DLL, I add it as a Reference in my
C# program.

When I look at the reference and I double click to view it in the objec
browser , I see only structs , without their members. And I don't see methods.
Is there a way to compile the DLL so I can at least have the structs with
their members. The methods I can DLLImport but the structs not and they are
very important.

Can somebody please help? Thanks a lot in advance.

NETFAN

[VivekR]

Hi,

For importing structs, declare the struct
[StructLayout(La youtKind.Sequen tial)]
public struct SampleStruct
{
public uint field1;
public uint field2;
}

Declare API function that uses the struct as follows

[DllImport("Your Module.DLL")]
static extern void StructUsage(Sam pleStruct st);

Hope that helps.

Regards
Vivek Ragunathan

[Mas L via DotNetMonster.com]

Big Thx but... :)

Is that possible if the structs use types that are not available in C#?

something like this...

struct loService
{
loDriver driver;
unsigned long initphase;
loCaller cactx;

unsigned cform_dataonly,
cform_datatime,
cform_writecomp l;

loClient *servlist;
int shutdown; /* indicates the shutdown condition */
unsigned serv_key; /* generator for server's IDs */
lw_mutex lkList; /* servlist & shutdown */
lw_rwlock lkMgmt; /* adding & searching in tags[] */
/* using of allocated tags is unlocked */
/* changing of lastused - through lkSec */
lw_rwlock lkPrim; /* access to tags::primXXX */
lw_mutex lkDr; /* serialise ldSubscribe()
ldWriteTags(), ldReadTags() */
loThrControl update_pipe;
lw_condb lkTridWait;
/* lock secondary, and lasused & other counts,
.state = 1 when secondary updated */
int (*wstrcmp)(cons t loWchar *, const loWchar *);
int (*wstrncmp)(con st loWchar *, const loWchar *, unsigned);
int (*wstrhash)(con st loWchar *);
#if 0
int (*wstrnhash)(co nst loWchar *, unsigned);
#endif

loWchar branch_sep;
unsigned tag_count; /* valid ti is: 0 < ti < tag_count */
unsigned firstfree; /* free ti is >= firstfree */
unsigned lastused; /* valid ti is <= lastused */
unsigned lastnamed; /* valid named ti is <= lastnamed */
loTagEntry *tags;
loTagValue *secondary;
lo_hash *name_hash;
loTrid sec_trid, prim_trid;
#if LO_EV_TIMESTAMP
FILETIME *ts_prim, *ts_sec;
unsigned ts_size;
#endif
/* loTrid prim_changed;*/

struct
loProperty **proplist;
unsigned proplist_count;

void *log;

loService *iam;
};
VivekR wrote:

Hi,

For importing structs, declare the struct
[StructLayout(La youtKind.Sequen tial)]
public struct SampleStruct
{
public uint field1;
public uint field2;
}

Declare API function that uses the struct as follows

[DllImport("Your Module.DLL")]
static extern void StructUsage(Sam pleStruct st);

Hope that helps.

Regards
Vivek Ragunathan

--
Message posted via http://www.dotnetmonster.com

[Willy Denoyette [MVP]]

"Mas L via DotNetMonster.c om" <fo***@nospam.D otNetMonster.co m> wrote in
message news:4F******** ***@DotNetMonst er.com...

Hi,

I have a c++ source code which I can compile to be a DLL (in VS.NET 2003).
And I need to use it in a C# program.

After I compiled/build the C++ code to a DLL, I add it as a Reference in
my
C# program.

When I look at the reference and I double click to view it in the objec
browser , I see only structs , without their members. And I don't see
methods.
Is there a way to compile the DLL so I can at least have the structs with
their members. The methods I can DLLImport but the structs not and they
are
very important.

Can somebody please help? Thanks a lot in advance.

NETFAN

To use DllImport (PInvoke interop), the functions to be called from C# must
be exported as native C style function. Native code DLL's can't be
referenced in VS unless they are registerd COM servers, so I wonder how you
managed to set a reference to such DLL.

Willy.

[Mas L via DotNetMonster.com]

Thx

Well I did, in the Build options I set "Managed Extensions" to "Yes"
And I could reference it. Ok I can see that there is prob only one way to
solve this and translate all my c/c++ code to C# ?? Cuz I need the structs
and their specific types.

Dllimport is not enough.

If I do it with dllimport and no reference , I have no structs and I need
them.
And I cant import the structs cuz he doesnt recognize halve of types in that
struct.

What can I do?

Kind Regards
Willy Denoyette [MVP] wrote:

Hi,

[quoted text clipped - 17 lines]

NETFAN

To use DllImport (PInvoke interop), the functions to be called from C# must
be exported as native C style function. Native code DLL's can't be
referenced in VS unless they are registerd COM servers, so I wonder how you
managed to set a reference to such DLL.

Willy.

--
Message posted via DotNetMonster.c om
http://www.dotnetmonster.com/Uwe/For...sharp/200506/1

[Willy Denoyette [MVP]]

I see, you compiled your C++ code as a managed DLL, but this is not enough
for it to be usable from C#. The reason for this is that while compiling
with managed "extensions enabled" your code translates to MSIL, your classes
remain unmanaged and cannot be used directly from C#.
To solve this issue you have basically two options:
- Convert all of your native C++ classes to managed classes.
- Write a managed wrapper for your unmanaged implementation, that way you
can keep the unmanaged DLL as is, while from managed code you call the
unmanaged implementation through a "managed proxy" interface that delegates
the calls to unmanaged code.

C# ----> Managed proxy ----> Unmanaged class(es).
managed C++ unmanaged C++

Willy.
"Mas L via DotNetMonster.c om" <fo***@DotNetMo nster.com> wrote in message
news:4F******** ***@DotNetMonst er.com...

Thx

Well I did, in the Build options I set "Managed Extensions" to "Yes"
And I could reference it. Ok I can see that there is prob only one way to
solve this and translate all my c/c++ code to C# ?? Cuz I need the structs
and their specific types.

Dllimport is not enough.

If I do it with dllimport and no reference , I have no structs and I need
them.
And I cant import the structs cuz he doesnt recognize halve of types in
that
struct.

What can I do?

Kind Regards
Willy Denoyette [MVP] wrote:

Hi,

[quoted text clipped - 17 lines]

NETFAN

To use DllImport (PInvoke interop), the functions to be called from C#
must
be exported as native C style function. Native code DLL's can't be
referenced in VS unless they are registerd COM servers, so I wonder how
you
managed to set a reference to such DLL.

Willy.

--
Message posted via DotNetMonster.c om
http://www.dotnetmonster.com/Uwe/For...sharp/200506/1

[Mas L via DotNetMonster.com]

How do I do option 1?

Thx in advance

Willy Denoyette [MVP] wrote:

I see, you compiled your C++ code as a managed DLL, but this is not enough
for it to be usable from C#. The reason for this is that while compiling
with managed "extensions enabled" your code translates to MSIL, your classes
remain unmanaged and cannot be used directly from C#.
To solve this issue you have basically two options:
- Convert all of your native C++ classes to managed classes.
- Write a managed wrapper for your unmanaged implementation, that way you
can keep the unmanaged DLL as is, while from managed code you call the
unmanaged implementation through a "managed proxy" interface that delegates
the calls to unmanaged code.

C# ----> Managed proxy ----> Unmanaged class(es).
managed C++ unmanaged C++

Willy.

Thx

[quoted text clipped - 29 lines]

Willy.

--
Message posted via DotNetMonster.c om
http://www.dotnetmonster.com/Uwe/For...sharp/200506/1

[Willy Denoyette [MVP]]

Check these:
http://msdn.microsoft.com/library/de...art1_Start.asp

http://msdn.microsoft.com/library/de...art1_Start.asp

they have answers to all of your questions.

Willy.

"Mas L via DotNetMonster.c om" <fo***@DotNetMo nster.com> wrote in message
news:4F******** ***@DotNetMonst er.com...

How do I do option 1?

Thx in advance

Willy Denoyette [MVP] wrote:

I see, you compiled your C++ code as a managed DLL, but this is not enough
for it to be usable from C#. The reason for this is that while compiling
with managed "extensions enabled" your code translates to MSIL, your
classes
remain unmanaged and cannot be used directly from C#.
To solve this issue you have basically two options:
- Convert all of your native C++ classes to managed classes.
- Write a managed wrapper for your unmanaged implementation, that way you
can keep the unmanaged DLL as is, while from managed code you call the
unmanaged implementation through a "managed proxy" interface that
delegates
the calls to unmanaged code.

C# ----> Managed proxy ----> Unmanaged class(es).
managed C++ unmanaged C++

Willy.

Thx

[quoted text clipped - 29 lines]

Willy.

--
Message posted via DotNetMonster.c om
http://www.dotnetmonster.com/Uwe/For...sharp/200506/1

[Mas L via DotNetMonster.com]

Many many many thx :)
Willy Denoyette [MVP] wrote:

Check these:
http://msdn.microsoft.com/library/de...art1_Start.asp

http://msdn.microsoft.com/library/de...art1_Start.asp

they have answers to all of your questions.

Willy.

How do I do option 1?

[quoted text clipped - 23 lines]

>
>Willy.

--
Message posted via DotNetMonster.c om
http://www.dotnetmonster.com/Uwe/For...sharp/200506/1