Hi,
Trying to make a connection and getting the following error:
"The 'MySQLProv' provider is not registered on the local machine."
MySQl is installed and working, I also went to ODBC settings and created a
new System Data Source for MySQl. (MySQL ODBC 3.51 Driver)
Is it my responsibilty to set the provider name, or is this held somewhere
on the system ?
--
Steven www.stevenblair.com 5 10070
Hi,
I am not a MySQL expert, but you might be using OLEDB provider for MySQL,
not an ODBC one. If this is the case, ensure the OLEDB provider for MySQL is
installed properly.
If you could post your connection string (without username and password, of
course) and code that establishes the connection, it would be easier to
pinpoint the possible reason of the error.
--
Dmitriy Lapshin [C# / .NET MVP]
X-Unity Test Studio http://x-unity.miik.com.ua/teststudio.aspx
Bring the power of unit testing to VS .NET IDE
"Steven Blair" <st**********@b tinternet.com> wrote in message
news:bu******** **@hercules.bti nternet.com... Hi,
Trying to make a connection and getting the following error:
"The 'MySQLProv' provider is not registered on the local machine."
MySQl is installed and working, I also went to ODBC settings and created a new System Data Source for MySQl. (MySQL ODBC 3.51 Driver)
Is it my responsibilty to set the provider name, or is this held somewhere on the system ?
-- Steven www.stevenblair.com
On Wed, 21 Jan 2004 21:34:23 +0000 (UTC), "Steven Blair"
<st**********@b tinternet.com> wrote: Hi,
Trying to make a connection and getting the following error:
"The 'MySQLProv' provider is not registered on the local machine."
MySQl is installed and working, I also went to ODBC settings and created a new System Data Source for MySQl. (MySQL ODBC 3.51 Driver)
Is it my responsibilty to set the provider name, or is this held somewhere on the system ?
For your connection string, just use the dsn name for it. ie:
OdbcConnection myConn=new OdbcConnection( "DSN=myDSNname" );
Austin
Here is what I am doing:
string source = "Provider=MySQL Prov;" +
"Data Source=mySQLDB; " +
"User Id=myUsername;" +
"Password=myPas sword";
conn.Open();
--
Steven www.stevenblair.com
"Austin Ehlers" <th************ ***********@hot mail.com> wrote in message
news:jj******** *************** *********@4ax.c om... On Wed, 21 Jan 2004 21:34:23 +0000 (UTC), "Steven Blair" <st**********@b tinternet.com> wrote:
Hi,
Trying to make a connection and getting the following error:
"The 'MySQLProv' provider is not registered on the local machine."
MySQl is installed and working, I also went to ODBC settings and created
anew System Data Source for MySQl. (MySQL ODBC 3.51 Driver)
Is it my responsibilty to set the provider name, or is this held
somewhereon the system ?
For your connection string, just use the dsn name for it. ie: OdbcConnection myConn=new OdbcConnection( "DSN=myDSNname" );
Austin
On Thu, 22 Jan 2004 18:04:43 +0000 (UTC), "Steven Blair"
<st**********@b tinternet.com> wrote: Here is what I am doing:
string source = "Provider=MySQL Prov;" +
"Data Source=mySQLDB; " +
"User Id=myUsername;" +
"Password=myPa ssword";
conn.Open();
No need for that. Just set up an Odbc User DataSource. Control Panel Administrative Tools > Data Sources. Click Add. Select MySQL ODBC
3.51 Driver and click Finish. For the Data Source Name, pick
something that describes the actual database (say "MyFirstDB" ). Be
sure to click "Test Data Source" to make sure all of your Parameters
are correct. Then, in your code, all you need is just:
OdbcConnection myConn=new OdbcConnection( "DSN=MyFirstDB" );
myConn.Open();
Austin
Yes working now using OdbcConnection object.
This originally didnt work, but done a little investigation and realised I
need to install ODBC.net.
So, downloaded, instalkled, and added a reference and Open works fine :)
Thanx for the help, much appreciated.
--
Steven www.stevenblair.com
"Austin Ehlers" <th************ ***********@hot mail.com> wrote in message
news:94******** *************** *********@4ax.c om... On Thu, 22 Jan 2004 18:04:43 +0000 (UTC), "Steven Blair" <st**********@b tinternet.com> wrote:
Here is what I am doing:
string source = "Provider=MySQL Prov;" +
"Data Source=mySQLDB; " +
"User Id=myUsername;" +
"Password=myPa ssword";
conn.Open();
No need for that. Just set up an Odbc User DataSource. Control Panel Administrative Tools > Data Sources. Click Add. Select MySQL ODBC 3.51 Driver and click Finish. For the Data Source Name, pick something that describes the actual database (say "MyFirstDB" ). Be sure to click "Test Data Source" to make sure all of your Parameters are correct. Then, in your code, all you need is just:
OdbcConnection myConn=new OdbcConnection( "DSN=MyFirstDB" ); myConn.Open();
Austin This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics |
by: William Drew |
last post by:
REQUEST FOR DISCUSSION (RFD)
unmoderated group comp.databases.mysql
This is an invitation to discuss the following proposal to create newsgroup
comp.databases.mysql. Please note that YOU CANNOT VOTE NOW; you may be
able to vote on a version of this proposal later. See the PROCEDURE section
below if you need information about how the discussion works.
PLEASE POST ANY FOLLOWUPS TO THE NEWSGROUP NEWS.GROUPS.
|
by: Dave |
last post by:
I have a MS sql 2000 db that needs to sync with a Mysql db.
When a password is changed in the MS SQL table, I need to make sure
that the same value is updated in the Mysql db.
I dont have any control of the gui that is initiating this event. So,
I was thinking a trigger might be an alternate route.
I just dont know how to get the username and password values that have
just been updated from MS sql to Mysql.
|
by: Martin Franklin |
last post by:
I am trying to get a total record count on a Acess 97 mdb database. However
I get the following error when I try to load the page:
Provider error '80040154' Class not registered
http://www.assetresearch.com/clog/count.asp
I believe permissions for the IUSR_machine are correct as I am able to add
and delete records from the database through other ASP pages in the site.
Any ideas on what Class needs to be re-registered. If so, how do I...
|
by: asadikhan |
last post by:
Hi,
I am trying to configure my asp.net application to work with MySQL
using Connector/NET and I wish to use connection pooling. What is the
best way to do this?
This is what I have so far:
MySqlConnection myConnection;
MySqlDataAdapter myDataAdapter;
|
by: zMisc |
last post by:
I am using VB.NET 1.1 and cannot connect to a MySQL (v5) database.
I've done the following:
1) Create a DSN for MyODBC.
2) Connect using: Driver=MySQL ODBC 3.51 Driver; Server=localhost; Data
Source=test; UID=test; PWD=pwd; OPTION=3
When I run my app, I get this error: An OLE DB Provider was not specified in
| |
by: msch-prv |
last post by:
Hi, I am trying to tie a SQLDataSource control to MySQL without
success. The connection string works ok with an ObjectDataSource.
(Native asp.net 2.0 MySQL dll loaded in /bin)
For some reason, the compiler believes an SQL db is being accessed ("An
error has occurred while establishing a connection to the server. When
connecting to SQL Server 2005, this failure may be caused by the fact
that under the default settings SQL Server does...
|
by: Frank Rizzo |
last post by:
I've been given a project to work with which involves connecting to
MySQL from .NET 2.0 app. I've googled looked and there is a metric ton
of different MySQL ADO.NET providers from different people.
Is there a consensus on which one is the most stable, more or less
supported and has good support for the standard MySQL features (e.g.
stored procs)?
Regards.
|
by: Carmine [www.thetotalsite.it] |
last post by:
Hi,
I am using ASP.Net 2.0 with the MySQL Connector .Net 5.1.2.2.
I added these lines to the web.config to make the connector.net able to
handle the SqlConnection object (and so to bind it to a grinview/formview
etc.):
<DbProviderFactories>
<add name="MySQL Data Provider" invariant="MySql.Data.MySqlClient"
description=".Net Framework Data Provider for MySQL"
type="MySql.Data.MySqlClient.MySqlClientFactory, MySql.Data,
|
by: selvialagar |
last post by:
Private Connection As New System.Data.OleDb.OleDbConnection
Private Command As New System.Data.OleDb.OleDbCommand
Connection.ConnectionString = "Provider=MySQLProv;Data Source=localhost;User Id=root;"
Command.Connection = Connection
Connection.Open()
When this code is executed, it shows "MySQLProv is not registered in the local machine"
|
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look !
Part I. Meaning of...
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
| |
by: Hystou |
last post by:
Overview:
Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
|
by: adsilva |
last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
|
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
|
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
| |
by: bsmnconsultancy |
last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...
| |