473,473 Members | 2,002 Online
Bytes | Software Development & Data Engineering Community
Create Post

Home Posts Topics Members FAQ

off-topic: cost for developing site?

VMI
A client asked me to develop a site similar to http://www.luispachecorg.com
and I don't know how much I should charge for it. The site will have about 6
pages, and one of the pages will include a Search engine that will search for
houses in a DB that I will also create (similar to the Search under "Nuestras
propiedades" menu). Another page will include two calculators (similar to the
ones in
http://pacheco.elistados.com/calc_es...dab7518754bc5). The Flash will NOT be included (at least for now).
Since this is the first project I work on my own, I don't know how much I
should charge. Any help would be appreciated.
THanks.
Nov 19 '05 #1
6 1615
First, figure out how many hours it will take to develop. Of course, in
order to do this, you will need a much more specific set of requirements.
This set of requirements should be as complete as possible, no room for
interpretation. Once you've agreed on the requirements, you can calculate
the number of hours it will take to develop. Remember that it usually takes
longer than you originally conceive, and account for that. Then it's a
simple matter of multiplying the number of hours times your hourly rate.
Make sure you are as detailed as possible again, to ensure that there are no
misunderstandings between you and your client (of course, there will be, but
you want to attentuate this as much as possible). Finally, draw up a
contract, and require that the client sign on the dotted line.

Also, it may be necessary for you to secure a downpayment, depending on how
much and if you trust your client.

--
HTH,

Kevin Spencer
Microsoft MVP
..Net Developer
What You Seek Is What You Get.

"VMI" <VM*@discussions.microsoft.com> wrote in message
news:7B**********************************@microsof t.com...
A client asked me to develop a site similar to http://www.luispachecorg.com
and I don't know how much I should charge for it. The site will have
about 6
pages, and one of the pages will include a Search engine that will search
for
houses in a DB that I will also create (similar to the Search under
"Nuestras
propiedades" menu). Another page will include two calculators (similar to
the
ones in
http://pacheco.elistados.com/calc_es...dab7518754bc5).
The Flash will NOT be included (at least for now).
Since this is the first project I work on my own, I don't know how much I
should charge. Any help would be appreciated.
THanks.

Nov 19 '05 #2
This topic is of interest to me too. I think the hourly rate, which you
didn't mention, is a primary factor. Is there someplace on the Internet
where there's a rough outline of going rates for development in various
areas? I sure don't want to be undercutting anyone!

Sandy

"Kevin Spencer" wrote:
First, figure out how many hours it will take to develop. Of course, in
order to do this, you will need a much more specific set of requirements.
This set of requirements should be as complete as possible, no room for
interpretation. Once you've agreed on the requirements, you can calculate
the number of hours it will take to develop. Remember that it usually takes
longer than you originally conceive, and account for that. Then it's a
simple matter of multiplying the number of hours times your hourly rate.
Make sure you are as detailed as possible again, to ensure that there are no
misunderstandings between you and your client (of course, there will be, but
you want to attentuate this as much as possible). Finally, draw up a
contract, and require that the client sign on the dotted line.

Also, it may be necessary for you to secure a downpayment, depending on how
much and if you trust your client.

--
HTH,

Kevin Spencer
Microsoft MVP
..Net Developer
What You Seek Is What You Get.

"VMI" <VM*@discussions.microsoft.com> wrote in message
news:7B**********************************@microsof t.com...
A client asked me to develop a site similar to http://www.luispachecorg.com
and I don't know how much I should charge for it. The site will have
about 6
pages, and one of the pages will include a Search engine that will search
for
houses in a DB that I will also create (similar to the Search under
"Nuestras
propiedades" menu). Another page will include two calculators (similar to
the
ones in
http://pacheco.elistados.com/calc_es...dab7518754bc5).
The Flash will NOT be included (at least for now).
Since this is the first project I work on my own, I don't know how much I
should charge. Any help would be appreciated.
THanks.


Nov 19 '05 #3
I'm not aware of such a site, but I would be surprised if there were not
several such sites out there. Have you tried Googling it?

You do bring up a good point. In fact, you don't want your rate to be too
low, as it will scare many potential clients away!

--
HTH,

Kevin Spencer
Microsoft MVP
..Net Developer
What You Seek Is What You Get.

"Sandy" <Sa***@discussions.microsoft.com> wrote in message
news:F8**********************************@microsof t.com...
This topic is of interest to me too. I think the hourly rate, which you
didn't mention, is a primary factor. Is there someplace on the Internet
where there's a rough outline of going rates for development in various
areas? I sure don't want to be undercutting anyone!

Sandy

"Kevin Spencer" wrote:
First, figure out how many hours it will take to develop. Of course, in
order to do this, you will need a much more specific set of requirements.
This set of requirements should be as complete as possible, no room for
interpretation. Once you've agreed on the requirements, you can calculate
the number of hours it will take to develop. Remember that it usually
takes
longer than you originally conceive, and account for that. Then it's a
simple matter of multiplying the number of hours times your hourly rate.
Make sure you are as detailed as possible again, to ensure that there are
no
misunderstandings between you and your client (of course, there will be,
but
you want to attentuate this as much as possible). Finally, draw up a
contract, and require that the client sign on the dotted line.

Also, it may be necessary for you to secure a downpayment, depending on
how
much and if you trust your client.

--
HTH,

Kevin Spencer
Microsoft MVP
..Net Developer
What You Seek Is What You Get.

"VMI" <VM*@discussions.microsoft.com> wrote in message
news:7B**********************************@microsof t.com...
>A client asked me to develop a site similar to
>http://www.luispachecorg.com
> and I don't know how much I should charge for it. The site will have
> about 6
> pages, and one of the pages will include a Search engine that will
> search
> for
> houses in a DB that I will also create (similar to the Search under
> "Nuestras
> propiedades" menu). Another page will include two calculators (similar
> to
> the
> ones in
> http://pacheco.elistados.com/calc_es...dab7518754bc5).
> The Flash will NOT be included (at least for now).
> Since this is the first project I work on my own, I don't know how much
> I
> should charge. Any help would be appreciated.
> THanks.


Nov 19 '05 #4
VMI
The client already know my hourly rate, I'm just not sure how many hours
it'll take me. In this case, how many hours would it take to develop
something like this (http://www.luispachecorg.com)?

"Sandy" wrote:
This topic is of interest to me too. I think the hourly rate, which you
didn't mention, is a primary factor. Is there someplace on the Internet
where there's a rough outline of going rates for development in various
areas? I sure don't want to be undercutting anyone!

Sandy

"Kevin Spencer" wrote:
First, figure out how many hours it will take to develop. Of course, in
order to do this, you will need a much more specific set of requirements.
This set of requirements should be as complete as possible, no room for
interpretation. Once you've agreed on the requirements, you can calculate
the number of hours it will take to develop. Remember that it usually takes
longer than you originally conceive, and account for that. Then it's a
simple matter of multiplying the number of hours times your hourly rate.
Make sure you are as detailed as possible again, to ensure that there are no
misunderstandings between you and your client (of course, there will be, but
you want to attentuate this as much as possible). Finally, draw up a
contract, and require that the client sign on the dotted line.

Also, it may be necessary for you to secure a downpayment, depending on how
much and if you trust your client.

--
HTH,

Kevin Spencer
Microsoft MVP
..Net Developer
What You Seek Is What You Get.

"VMI" <VM*@discussions.microsoft.com> wrote in message
news:7B**********************************@microsof t.com...
A client asked me to develop a site similar to http://www.luispachecorg.com
and I don't know how much I should charge for it. The site will have
about 6
pages, and one of the pages will include a Search engine that will search
for
houses in a DB that I will also create (similar to the Search under
"Nuestras
propiedades" menu). Another page will include two calculators (similar to
the
ones in
http://pacheco.elistados.com/calc_es...dab7518754bc5).
The Flash will NOT be included (at least for now).
Since this is the first project I work on my own, I don't know how much I
should charge. Any help would be appreciated.
THanks.


Nov 19 '05 #5
VMI wrote:
The client already know my hourly rate, I'm just not sure how many
hours it'll take me. In this case, how many hours would it take to
develop something like this (http://www.luispachecorg.com)?

There is no general rule for this.
It depends on your skills (are you just starting on web developement or
do you have years and years of experience in ASP.Net ?) and on the tools
available. With "tools" I mean not only VS.Net (or whatever)
but also libraries that you may have that make developing such
a site easier.
"Sandy" wrote:
This topic is of interest to me too. I think the hourly rate, which
you didn't mention, is a primary factor. Is there someplace on the
Internet where there's a rough outline of going rates for
development in various areas? I sure don't want to be undercutting
anyone!

Sandy

"Kevin Spencer" wrote:
First, figure out how many hours it will take to develop. Of
course, in order to do this, you will need a much more specific set
of requirements. This set of requirements should be as complete as
possible, no room for interpretation. Once you've agreed on the
requirements, you can calculate the number of hours it will take to
develop. Remember that it usually takes longer than you originally
conceive, and account for that. Then it's a simple matter of
multiplying the number of hours times your hourly rate. Make sure
you are as detailed as possible again, to ensure that there are no
misunderstandings between you and your client (of course, there
will be, but you want to attentuate this as much as possible).
Finally, draw up a contract, and require that the client sign on
the dotted line.

Also, it may be necessary for you to secure a downpayment,
depending on how much and if you trust your client.

--
HTH,

Kevin Spencer
Microsoft MVP
..Net Developer
What You Seek Is What You Get.

"VMI" <VM*@discussions.microsoft.com> wrote in message
news:7B**********************************@microsof t.com...
A client asked me to develop a site similar to
http://www.luispachecorg.com and I don't know how much I should
charge for it. The site will have about 6
pages, and one of the pages will include a Search engine that will
search for
houses in a DB that I will also create (similar to the Search under
"Nuestras
propiedades" menu). Another page will include two calculators
(similar to the
ones in
http://pacheco.elistados.com/calc_es...dab7518754bc5).
The Flash will NOT be included (at least for now).
Since this is the first project I work on my own, I don't know how
much I should charge. Any help would be appreciated.
THanks.

Nov 19 '05 #6
In this case, how many hours would it take to develop
something like this (http://www.luispachecorg.com)?
How many hours would it take to run 10 miles? Answer: It depends on the
runner.

Also, you haven't stated any requirements. That description came from your
potential client, who know s next-to-nothing about programming and/or
technology. It's your job to extract the exact details of what the client
wants, and determine the true and complete requirements.

--
HTH,

Kevin Spencer
Microsoft MVP
..Net Developer
What You Seek Is What You Get.

"VMI" <VM*@discussions.microsoft.com> wrote in message
news:57**********************************@microsof t.com... The client already know my hourly rate, I'm just not sure how many hours
it'll take me. In this case, how many hours would it take to develop
something like this (http://www.luispachecorg.com)?

"Sandy" wrote:
This topic is of interest to me too. I think the hourly rate, which you
didn't mention, is a primary factor. Is there someplace on the Internet
where there's a rough outline of going rates for development in various
areas? I sure don't want to be undercutting anyone!

Sandy

"Kevin Spencer" wrote:
> First, figure out how many hours it will take to develop. Of course, in
> order to do this, you will need a much more specific set of
> requirements.
> This set of requirements should be as complete as possible, no room for
> interpretation. Once you've agreed on the requirements, you can
> calculate
> the number of hours it will take to develop. Remember that it usually
> takes
> longer than you originally conceive, and account for that. Then it's a
> simple matter of multiplying the number of hours times your hourly
> rate.
> Make sure you are as detailed as possible again, to ensure that there
> are no
> misunderstandings between you and your client (of course, there will
> be, but
> you want to attentuate this as much as possible). Finally, draw up a
> contract, and require that the client sign on the dotted line.
>
> Also, it may be necessary for you to secure a downpayment, depending on
> how
> much and if you trust your client.
>
> --
> HTH,
>
> Kevin Spencer
> Microsoft MVP
> ..Net Developer
> What You Seek Is What You Get.
>
> "VMI" <VM*@discussions.microsoft.com> wrote in message
> news:7B**********************************@microsof t.com...
> >A client asked me to develop a site similar to
> >http://www.luispachecorg.com
> > and I don't know how much I should charge for it. The site will have
> > about 6
> > pages, and one of the pages will include a Search engine that will
> > search
> > for
> > houses in a DB that I will also create (similar to the Search under
> > "Nuestras
> > propiedades" menu). Another page will include two calculators
> > (similar to
> > the
> > ones in
> > http://pacheco.elistados.com/calc_es...dab7518754bc5).
> > The Flash will NOT be included (at least for now).
> > Since this is the first project I work on my own, I don't know how
> > much I
> > should charge. Any help would be appreciated.
> > THanks.
>
>
>

Nov 19 '05 #7

This thread has been closed and replies have been disabled. Please start a new discussion.

Similar topics

4
by: Frank | last post by:
Whats best : register_globals ON ? OR register_globals OFF ? I currently use: $_POST
2
by: Alexander Schmidt | last post by:
Hi, I am not very familiar with C++ programming, so before I do a dirty hack I ask for a more elegant solution (but only the usage of STL is allowed, no special libs). So I need to read a file...
2
by: scorp7355 | last post by:
I was wondering if there is some other way to turn autocomplete off besides using "autocomplete=off", using a meta tag or something similar. It would be great if there is some way to turn it off...
21
by: nicholas | last post by:
Although in my web.config I have <customErrors mode="off" /> I still get no detailed errors. How comes ? THX This is what I get: Server Error in '/mywebfolder'Application.
4
by: no_spam_for_gman | last post by:
Hi, I can turn off autocommit within the command window but I cannot figure out how to turn it off when you are in the IBM DB2 Command Line Processor. Does anybody knows how? By the way I mean...
6
by: Frank Rizzo | last post by:
I have the following situation: 1. Application X1 runs under a regular user account (this user is also the currently logged on user). 2. Application X1 kicks off Application X2 using an...
8
by: Rory Becker | last post by:
A wise man once said: "Never put off until runtime what you can fix at compile time." Actually I think he said it about 10 minutes before I started this post. I am a firm believer, like the...
8
by: =?Utf-8?B?R3JlZw==?= | last post by:
We have an application in our office that has the Option Strict option set to off right now. I do understand it should be set to ON, but right now, I'm just going to continue with it this way since...
0
by: scooby dooby | last post by:
Hi All, I need to write a script for windows,which has the requirements as below. 1,It should log out the particuler user from windows at a particuler time ,say 6 o'clock in the evening...
6
by: Rain | last post by:
Hi, I noticed the other day when I was trying to optimise the traffic on a particular web page that it had significant viewstate even though I had turned it off for most of the controls. So in...
0
marktang
by: marktang | last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However,...
0
by: Hystou | last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can...
0
Oralloy
by: Oralloy | last post by:
Hello folks, I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>". The problem is that using the GNU compilers,...
1
by: Hystou | last post by:
Overview: Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows...
0
tracyyun
by: tracyyun | last post by:
Dear forum friends, With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each...
0
agi2029
by: agi2029 | last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing,...
0
by: conductexam | last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and...
1
muto222
php
by: muto222 | last post by:
How can i add a mobile payment intergratation into php mysql website.
0
bsmnconsultancy
by: bsmnconsultancy | last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence...

By using Bytes.com and it's services, you agree to our Privacy Policy and Terms of Use.

To disable or enable advertisements and analytics tracking please visit the manage ads & tracking page.