473,836 Members | 1,595 Online
Bytes | Software Development & Data Engineering Community
+ Post

Home Posts Topics Members FAQ

Water Damage Restoration 24 hour open 7 Days

Water Damage Restoration 24 hour open 7 Days
Phone 1 877 364 5264
When disaster strikes such as a washing machine overflow, bath
overflow, burst pipe, rainwater from balcony etc, water damage
restoration procedures must be followed.
It is not as simple as just sucking up the water and cleaning the
carpet and letting the area dry naturally.

It is not the wet carpet that is the problem it is the underlay and
the wood or concrete floor that needs to be dried.

If the underlay is not dried or replaced you will end up with mould
and odour problems.
Our procedure for wet carpet is as follows.

1/ Call out to the premises and extract water using powerful vacuum
extraction machinery.

2/ Apply browning treatment to carpet to prevent water stains.

3/ Move furniture on to foam blocks to avoid further damage.

4/ Lift corner of carpet and inspect for damage underneath carpet.

5/ Install drying equipment such as air movers and / or dehumidifiers
and leave these on site until area is dry.

6/ Call back to premises on daily basis to check drying progress.

7/ Relay carpet and underlay when dry.

8/ Steam clean and deodorise carpet on completion of restoration.

Notes on water restoration:

1/ An area such as a bedroom will normally take between 24-48 hours to
dry completely using drying equipment.

2/ When a premises has been affected by sewage overflow we do not
attempt carpet restoration. The carpet and underlay must be removed
from the premises and disposed and the flooring treated and
deodorised. USA Standards does not allow restoration of sewage
affected carpet.
http://www.123carpetclean.com/waterdamage.htm
Water Damage Restoration Emergency 24 hour open 7 Days Call
1-877-364-5264
Oct 16 '08 #1
0 1234

This thread has been closed and replies have been disabled. Please start a new discussion.

Similar topics

3
2416
by: Tommy.Vincent | last post by:
Hi, its newbie question. I have one production server(A) ,one backup server(B),additional server(C). my database backup are moved from A to C in regular basis. My problem is that when ever I have to restore my database in Backup
0
1264
by: Richard | last post by:
hi, I am using SQL SERVER 2000. My query is, Can I restore my 60 transactional log file backup in one sql statement,giving condition where it is suppose to start and end.
1
2094
by: Tommy.Vincent | last post by:
Hi, When i use to work on Windows 2000 advance server and Sql 2000 I was able to do network restoration by using a mapped drive where my backup use to be lying.What i did was I assigned administrator rights to my login and in Services (mssqlserver)i added my login. Then I was able to access any mapped drive from my network in Sql server 2000.
5
2021
by: marty | last post by:
As part of an assignment I need to calculate a 24 hour time by subtracting a one time from another e.g. if the user enters 1.00 as the time and 1.30 as the time to subtract the returned time is 23.30 the previous day. This is straightforward when dealing with positive times. But when negative times are introduced (as above) it all gets tricky. I'd originally thought that a lookup table of times against a corresponding negative time...
11
3031
by: jonathan184 | last post by:
Hi I am trying to do a script to monitor a dir where files pass through approx every 5 mins but sometimes files may not come in for hours So the purpose of the script is to monitor by if no files pass through in 1 hour send an email. So was thinking to use the shell command to grab the time when a file comes in and write to a txtfile. Now when the files keep coming it will overwrite the old time. Now if no new files are coming in an hour...
2
1925
by: bharadwaj | last post by:
any automated restoration script is available in sql server2000. I want to do the restoration for 10 databases(full backup,latest differential backup) in other server. Pls do the needful.
0
972
by: bharadwaj | last post by:
Hi, I am trying to do restoration for n databases using automated script.The script is given below. it is not giving errors while job execution ,but restoration is not happening.(no record is in msdb.restorehistory). any advice from you. I have doubt on my dynamic sql part. CREATE procedure test_restore as DECLARE @backup_set_id_Full INT --DECLARE @Full_Backup_Set_Date datetime DECLARE @backup_set_id_Diff INT
1
3607
by: George | last post by:
Hello........I have a problem adding up record entries with more than 24 hours when the fields are formatted as hour/minute (h:m). If the actual summed total of all records is greater than 24 hours, then the hour part of the answer is truncated to a number less than 24 based on however many multiples of 24 were part of the summed answer (clear as mud?). I anticipate the soulution involves either formatting the time field in a manner that...
0
9826
marktang
by: marktang | last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look ! Part I. Meaning of...
0
9674
by: Hystou | last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it. First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
0
10860
Oralloy
by: Oralloy | last post by:
Hello folks, I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>". The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed. This is as boiled down as I can make it. Here is my compilation command: g++-12 -std=c++20 -Wnarrowing bit_field.cpp Here is the code in...
0
10261
tracyyun
by: tracyyun | last post by:
Dear forum friends, With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
0
9389
agi2029
by: agi2029 | last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own.... Now, this would greatly impact the work of software developers. The idea...
1
7796
isladogs
by: isladogs | last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM). In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules. He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms. Adolph will...
0
5659
by: TSSRALBI | last post by:
Hello I'm a network technician in training and I need your help. I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs. The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols. I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
1
4466
by: 6302768590 | last post by:
Hai team i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
2
4026
muto222
by: muto222 | last post by:
How can i add a mobile payment intergratation into php mysql website.

By using Bytes.com and it's services, you agree to our Privacy Policy and Terms of Use.

To disable or enable advertisements and analytics tracking please visit the manage ads & tracking page.