NooB: Anyone help with what I could be doing incorrectly here? Trying to
have a parameter drop down list where a user can select one or more of the
available values contained in the table to filter out results. Have a
single table with five values. Keep getting the following error....
Table name is Name
Field is NickName
Parameter name is "Nick", datatype string, prompt "Select NickNames",
multivalue "on", available values "From Query", dataset points to ODBC SQL
connection, value field is NickName, Label Field is NickName, default values
null
select statement reads: select * from name where (NickName in (@Nick))
ERROR MESSAGE WHEN PREVIEW: [rsInvalidReport ParameterDepend ency] The report
parameter 'Nick' has a DefaultValue or a ValidValue that depends on the
report parameter "Nick". Forward dependencies are not valid.
Any clue?
1  4116 
On Jun 10, 10:54 pm, "Ben" <nos...@thankyo u.comwrote:
NooB: Anyone help with what I could be doing incorrectly here? Trying to
have a parameter drop down list where a user can select one or more of the
available values contained in the table to filter out results. Have a
single table with five values. Keep getting the following error....
Table name is Name
Field is NickName
Parameter name is "Nick", datatype string, prompt "Select NickNames",
multivalue "on", available values "From Query", dataset points to ODBC SQL
connection, value field is NickName, Label Field is NickName, default values
null
select statement reads: select * from name where (NickName in (@Nick))
ERROR MESSAGE WHEN PREVIEW: [rsInvalidReport ParameterDepend ency] The report
parameter 'Nick' has a DefaultValue or a ValidValue that depends on the
report parameter "Nick". Forward dependencies are not valid.
Any clue?
Bob, I think you can't use parameter with IN clause. To test, change
to 'where NickName = @Nick' This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics | |
by: Rolf Barbakken |
last post by:
I have an xml with records like this one:
<a:response>
<a:href>http://server/public/sol/comp/1049306.eml</a:href>
<a:propstat>
<a:status>HTTP/1.1 200 OK</a:status>
<a:prop>
<d:customerid>1049306</d:customerid>
<e:professioncode b:dt="mv.string">
<c:v>byggtapetserarbeider</c:v>
|
by: CSDunn |
last post by:
Hello,
I have a situation with MS Access 2000 in which I need to display report
data in spreadsheet orientation (much like a datasheet view for a form). If
you think of the report in terms of what a spreadsheet might show, the
column names will actually be dynamic, based on data from a SQL Server 2000
database. The row data will also come from the same database. So in this
case, I will have a main report and a subreport. I've already tried...
|
by: Nathan Bloomfield |
last post by:
Does anyone know if there is any documentation which relates to Access2k + ?
or can anyone help adjust the code?
I am having trouble converting the DAO references.
TITLE :INF: How to Create a Dynamic Crosstab Report
PRODUCT :Microsoft Access
PROD/VER:1.00 1.10
OPER/SYS:WINDOWS
|
by: Mike Conklin |
last post by:
This one really has me going. Probably something silly. I'm using
dcount for a report to determine the number of different types of
tests proctored in a semester.
My report is based on a parameter query which is the recordsource for
the report. The parameter is <=. The query returns the
correct amounts upto the date entered (no need for "between" dates
here).
There are 8 textboxes with dcounts; 2 other boxes Sum some of these
|
by: Henry |
last post by:
I have written an ASP/VB.Net application via VS 2003 (Crystal V9) that
uses MS Access 2000 as its database. I can export reports that have no
linked sub reports for printing. However, I'm unable to export reports
that have linked subreports. I receive (a "Missing parameter field
current value") on the following statement:
Me.crReportDocument.Export()
The main report requires 4 parameters. The linked reports do not
require any...
| | |
by: amith.srinivas |
last post by:
Hi all,
From a word macro in VBA, I am trying to create a report in
access DB. The report is based on a query with a parameter. I am using
Set rpt = Application.CreateReport
rpt.RecordSource = <<Query_Name>>
Once I create the report, I m trying to create labels to display the
Report title in the Report Header section.
|
by: RMC |
last post by:
Hello,
I'm looking for a way to parse/format a memo field within a report.
The Access 2000 database (application) has an equipment table that
holds a memo field. Within the report, the memo field is printed within
the detailed area. The problem is, the apllication is not setup
properly, thus the users are entering data within the memo field as:
location1 1/1/2005 1/1/2006
|
by: kamboj.shalabh |
last post by:
Hi to all,
Well, I am working on dotnet 2005 with crystal reports 10 and backend
as sql server.
I am facing a problem while loading a report.
Actually the issue is, when I load report it takes huge time to load a
report whether it is a 1 page report or thousands page report.
We have migrated the project from VB to VB.NET, in VB its working fine
because in that report is loaded page by page but in VB.NET whole
report is loaded in one go.
|
by: sara |
last post by:
I am stuck.
I have a report that I use in multiple places, so I call it with
varying parameters (using the Where Clause in the code).
I preview the report, send it to snap, then close the preview (the
user can go to the server to see the snap view). Print, snap, then
close is the only way I can snap with a Where clause.
If there is No data that meets the criteria, I can cancel the print,
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
|
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed.
This is as boiled down as I can make it.
Here is my compilation command:
g++-12 -std=c++20 -Wnarrowing bit_field.cpp
Here is the code in...
| | |
by: Hystou |
last post by:
Overview:
Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
|
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
|
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
| | |
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
| |
