This is a bit of an IIS question but I am not sure if this is related to my
installation of VS Pro.
I usually use Visual Studio 2005, which has it's own built in web server. I
want to start using IIS. It is IIS 5 on XP Pro SP 2 and IE 7. However when I
type in either http://localhost/test.asp (or default.aspx to test .net) or
127.0.0.1/test.asp I get the following error
Internet Explorer cannot display the webpage
Most likely causes:
You are not connected to the Internet.
The website is encountering problems.
There might be a typing error in the address.
I can ping the localhost, I have tried it in firefox and I have tried
switching off the friendly errors and any firewalls but to no avail, can
anyone help? Could it be something to do with the order IIS and VS have been
installed. I had problems in work and ended up reinstalling IIS and then the
..net framework but I was getting specific error messages in this case.
Regards, Chris. 4  6853 
Try this :
Open IE with http://localhost/test.asp or http://localhost/test.aspx and check
to see if, in the "File" menu (top left), the "Work Offline" choice has a checkmark.
If it does, remove the checkmark ( by reselecting ) and try the page again.
Juan T. Llibre, asp.net MVP
asp.net faq : http://asp.net.do/faq/
foros de asp.net, en español : http://asp.net.do/foros/
=============== =============== =====
"Chris" <no****@nospam. comwrote in message news:Oo******** ******@TK2MSFTN GP05.phx.gbl...
This is a bit of an IIS question but I am not sure if this is related to my installation of VS
Pro.
I usually use Visual Studio 2005, which has it's own built in web server. I want to start using
IIS. It is IIS 5 on XP Pro SP 2 and IE 7. However when I type in either http://localhost/test.asp
(or default.aspx to test .net) or 127.0.0.1/test.asp I get the following error
Internet Explorer cannot display the webpage
Most likely causes:
You are not connected to the Internet.
The website is encountering problems.
There might be a typing error in the address.
I can ping the localhost, I have tried it in firefox and I have tried switching off the friendly
errors and any firewalls but to no avail, can anyone help? Could it be something to do with the
order IIS and VS have been installed. I had problems in work and ended up reinstalling IIS and
then the .net framework but I was getting specific error messages in this case. Regards, Chris.
Wierd. When I set it to work offline, it works. I would have thought it
would be the other way around. Any ideas, it would be nice to surf local and
remote pages at the same time without ticking thr box, Regards, Chris.
"Juan T. Llibre" <no***********@ nowhere.comwrot e in message
news:Ow******** ******@TK2MSFTN GP06.phx.gbl...
Try this :
Open IE with http://localhost/test.asp or http://localhost/test.aspx and
check
to see if, in the "File" menu (top left), the "Work Offline" choice has a
checkmark.
If it does, remove the checkmark ( by reselecting ) and try the page
again.
Juan T. Llibre, asp.net MVP
asp.net faq : http://asp.net.do/faq/
foros de asp.net, en español : http://asp.net.do/foros/
=============== =============== =====
"Chris" <no****@nospam. comwrote in message
news:Oo******** ******@TK2MSFTN GP05.phx.gbl...
>This is a bit of an IIS question but I am not sure if this is related to
my installation of VS Pro.
I usually use Visual Studio 2005, which has it's own built in web server.
I want to start using IIS. It is IIS 5 on XP Pro SP 2 and IE 7. However
when I type in either http://localhost/test.asp (or default.aspx to test
.net) or 127.0.0.1/test.asp I get the following error
Internet Explorer cannot display the webpage
Most likely causes:
You are not connected to the Internet.
The website is encountering problems.
There might be a typing error in the address.
I can ping the localhost, I have tried it in firefox and I have tried
switching off the friendly errors and any firewalls but to no avail, can
anyone help? Could it be something to do with the order IIS and VS have
been installed. I had problems in work and ended up reinstalling IIS and
then the .net framework but I was getting specific error messages in this
case. Regards, Chris.
I'm setting a fresh root folder in IIS and it now no longer works. This is
very frustrating! :) I am sure it is something very basic.
"Chris" <no****@nospam. comwrote in message
news:O2******** ******@TK2MSFTN GP03.phx.gbl...
Wierd. When I set it to work offline, it works. I would have thought it
would be the other way around. Any ideas, it would be nice to surf local
and remote pages at the same time without ticking thr box, Regards, Chris.
"Juan T. Llibre" <no***********@ nowhere.comwrot e in message
news:Ow******** ******@TK2MSFTN GP06.phx.gbl...
>Try this :
Open IE with http://localhost/test.asp or http://localhost/test.aspx and
check
to see if, in the "File" menu (top left), the "Work Offline" choice has a
checkmark.
If it does, remove the checkmark ( by reselecting ) and try the page
again.
Juan T. Llibre, asp.net MVP
asp.net faq : http://asp.net.do/faq/
foros de asp.net, en español : http://asp.net.do/foros/
============== =============== ======
"Chris" <no****@nospam. comwrote in message
news:Oo******* *******@TK2MSFT NGP05.phx.gbl.. .
>>This is a bit of an IIS question but I am not sure if this is related to
my installation of VS Pro.
I usually use Visual Studio 2005, which has it's own built in web
server. I want to start using IIS. It is IIS 5 on XP Pro SP 2 and IE 7.
However when I type in either http://localhost/test.asp (or default.aspx
to test .net) or 127.0.0.1/test.asp I get the following error
Internet Explorer cannot display the webpage
Most likely causes:
You are not connected to the Internet.
The website is encountering problems.
There might be a typing error in the address.
I can ping the localhost, I have tried it in firefox and I have tried
switching off the friendly errors and any firewalls but to no avail, can
anyone help? Could it be something to do with the order IIS and VS have
been installed. I had problems in work and ended up reinstalling IIS and
then the .net framework but I was getting specific error messages in
this case. Regards, Chris.
re:
>When I set it to work offline, it works.
That doesn't make sense.
IE's "Work Offline" option, in the "File" menu should be *unselected* for "online browsing" to work.
Make sure it *is* unselected.
Could this be a permissions problem due to XP SP2 ?
That's not unheard of...
You're using VS 2005/ASP.NET 2.0, right ?
Do you know what account ASP.NET runs as ?
If you're running XP SP2, it should be YourMachineName \ASPNET, if you're not impersonating.
Try running : from a command window in the .Net Framework directory:
Drive:\WINDOWS\ Microsoft.NET\F ramework\v2.0.5 0727 :
aspnet_regiis -u
and following that:
aspnet_regiis -i
Then, run
aspnet_regiis -GA YourMachineName \ASPNET
Then, try to access your ASP.NET page.
Juan T. Llibre, asp.net MVP
asp.net faq : http://asp.net.do/faq/
foros de asp.net, en español : http://asp.net.do/foros/
=============== =============== =====
"Chris" <no****@nospam. comwrote in message news:%2******** ********@TK2MSF TNGP06.phx.gbl. ..
I'm setting a fresh root folder in IIS and it now no longer works. This is very frustrating! :) I
am sure it is something very basic.
"Chris" <no****@nospam. comwrote in message news:O2******** ******@TK2MSFTN GP03.phx.gbl...
>Wierd. When I set it to work offline, it works. I would have thought it would be the other way
around. Any ideas, it would be nice to surf local and remote pages at the same time without
ticking thr box, Regards, Chris.
"Juan T. Llibre" <no***********@ nowhere.comwrot e in message
news:Ow******* *******@TK2MSFT NGP06.phx.gbl.. .
>>Try this :
Open IE with http://localhost/test.asp or http://localhost/test.aspx and check
to see if, in the "File" menu (top left), the "Work Offline" choice has a checkmark.
If it does, remove the checkmark ( by reselecting ) and try the page again.
Juan T. Llibre, asp.net MVP
asp.net faq : http://asp.net.do/faq/
foros de asp.net, en español : http://asp.net.do/foros/
============= =============== =======
"Chris" <no****@nospam. comwrote in message news:Oo******** ******@TK2MSFTN GP05.phx.gbl...
This is a bit of an IIS question but I am not sure if this is related to my installation of VS
Pro.
I usually use Visual Studio 2005, which has it's own built in web server. I want to start using
IIS. It is IIS 5 on XP Pro SP 2 and IE 7. However when I type in either
http://localhost/test.asp (or default.aspx to test .net) or 127.0.0.1/test.asp I get the
following error
Internet Explorer cannot display the webpage
Most likely causes:
You are not connected to the Internet.
The website is encountering problems.
There might be a typing error in the address.
I can ping the localhost, I have tried it in firefox and I have tried switching off the
friendly errors and any firewalls but to no avail, can anyone help? Could it be something to do
with the order IIS and VS have been installed. I had problems in work and ended up reinstalling
IIS and then the .net framework but I was getting specific error messages in this case.
Regards, Chris.
This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics | |
by: Jerome Lefebvre |
last post by:
Hello,
Hope this will interest a few. I been working with a friend on the
problems given out during the "International Collegiate Programming Contest"
(ICPC) http://icpc.baylor.edu/icpc/ . Started out just trying to find the
solutions and then moving on, to "aggressively" trying to find the best
solution for each problems. First started to work on the problems using
C++ and then moved on to using Python, mostly since it was much easier...
|
by: Jim Hubbard |
last post by:
Are you up to speed on the difficulties in using the 1.1 .Net framework?
Not if you are unaware of the 1,596 issues listed at KBAlertz
(http://www.kbalertz.com/technology_3.aspx).
If you are going to use .Net......I highly recommend signing up for the free
KBAlertz newsletter at http://www.kbalertz.com/default.aspx.
Looking at all of the errors and quirks sometimes makes me wonder if this
thing is really ready for prime time.
|
by: 3f |
last post by:
Hello;
We have made a web application that people can download from our web site
and installed on:
Windows XP
Windows 2000 Professional
Windows 2003 Server
Windows 2000 Server
|
by: Corky |
last post by:
This works:
db2 SELECT DISTINCT PROBLEM_OBJECTS.PROBLEM_ID FROM PROBLEM_OBJECTS
INNER JOIN PROBLEMS ON PROBLEM_OBJECTS.PROBLEM_ID =
PROBLEMS.PROBLEM_ID WHERE INTEGER(DAYS(CURRENT DATE) -
DAYS(PROBLEMS.CLOSE_DATE)) = 365 AND PROBLEMS.CLOSE_DATE IS NOT NULL
But this doesn't:
db2 SELECT DISTINCT PROBLEM_OBJECTS.PROBLEM_ID FROM PROBLEM_OBJECTS
|
by: Ellen Graves |
last post by:
I am having a lot of problems with DB2 8.3.1 on RH Linux AS2.1.
Installing and running stored procedures is problematic. Stored
procedures I have used for years on V7 on WinNT are now failing
multiple times/day.
Data that exists in the db is not returned with a select *, but is
returned when a where clause with a primary key value is specified.
There are other problems, including the db crashing in the middle of a
simple query.
| | |
by: Jim |
last post by:
I have spent the past few weeks designing a database for my company.
The problem is I have started running into what I believe are stack
overflow problems. There are two tab controls on the form (nested),
three list views, one tree control with up to 30,000 nodes, maybe 15
comboboxes (half of which have a large recordset as rowsource), 20 or
so buttons and around 30 text boxes (not to mention the images,
labels, etc and around 1000 lines...
|
by: BBFrost |
last post by:
We just recently moved one of our major c# apps from VS Net 2002 to VS Net
2003. At first things were looking ok, now problems are starting to
appear.
So far ...
(1) ComboBox.SelectedValue = db_value;
If the db_value was not included in the ComboBox value list the
ComboBox.SelectedIndex used to return -1, Now the very same code is
|
by: Dales |
last post by:
I have a custom control that builds what we refer to as "Formlets"
around some content in a page. These are basically content "wrapper"
sections that are tables that have a colored header and provide an
open TD with a DIV in it for the content of this formlet. (The DIV is
for DHTML to hide and show the content)
I've created a web page showing step by step the two problems I'm
encountering. This problem is much easier to see than it...
|
by: Brian |
last post by:
NOTE ALSO POSTED IN
microsoft.public.dotnet.framework.aspnet.buildingcontrols
I have solved most of my Server Control Collection property issues.
I wrote an HTML page that describes all of the problems that I have
encountered to date and the solutions (if any) that I found.
http://users.adelphia.net/~brianpclab/ServerControlCollectionIssues.htm
This page also has all of the source code in a compressed file that you are
free to download...
|
by: Sergistm |
last post by:
Hello World, :D
I have a problem that it is making me crazy, I hope you can help me.
I'm trying to execute a .exe file with the Procces.Start, and there
is no problem when the file is on my computer, the problem comes when
the file is in a network drive.
The most amazing thing is that in one computer I can
execute my .Net program without problems independently if the file is
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
| | |
by: Hystou |
last post by:
Overview:
Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: conductexam |
last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one.
At the time of converting from word file to html my equations which are in the word document file was convert into image.
Globals.ThisAddIn.Application.ActiveDocument.Select();...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
|
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
| | |
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
|
by: bsmnconsultancy |
last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...
| |
