continuous parser error

=?Utf-8?B?QWNl?=

hello,
i just converted old .net project (it was a solution with web project and
class project) built in .net 1.0 and 1.1 framework to .net 2.0.
as i expected, when i clicked on the solution file from vs 2005, it went
through a conversion process and all seemed to go ok.
when i attempt to run, i get first parser error on global.asax and cs. i
still have global.asax and global.asax.cs attached together (as code-behind).
after few attempts, i just decided to remove the global.asax and code-behind
just for now in order to run the app first.
now i am getting a parser error on some user control.

Parser Error
Description: An error occurred during the parsing of a resource required to
service this request. Please review the following specific parse error
details and modify your source file appropriately.

Parser Error Message: Could not load type 'mytest.sk.cust omHeader'.

Source Error:
Line 1: <%@ Control Language="c#" AutoEventWireup ="True"
Codebehind="cus tomHeader.ascx. cs" inherits="'myte st.sk.customHea der"
TargetSchema="h ttp://schemas.microso ft.com/intellisense/ie5"%>
Line 2: <table width="100%">
Line 3: <tr>
Source File: /sk/customHeader.as cx Line: 1
--------------------------------------------------------------------------------
Version Information: Microsoft .NET Framework Version:2.0.507 27.42; ASP.NET
Version:2.0.507 27.210

any suggestions?

thanks
-a

Feb 23 '07 #1

Subscribe Reply

1787

=?Utf-8?B?QWNl?=

i found a fix (thanx to my buddy, dotnetjunky!).
..net 2.0 does not support codebehind so i replaced them all to codefile and
the problem is gone.
however, i am still getting parser error around global.asax. i am going to
remove global.asax and do some work around.

-a

"Ace" wrote:

hello,
i just converted old .net project (it was a solution with web project and
class project) built in .net 1.0 and 1.1 framework to .net 2.0.
as i expected, when i clicked on the solution file from vs 2005, it went
through a conversion process and all seemed to go ok.
when i attempt to run, i get first parser error on global.asax and cs. i
still have global.asax and global.asax.cs attached together (as code-behind).
after few attempts, i just decided to remove the global.asax and code-behind
just for now in order to run the app first.
now i am getting a parser error on some user control.

Parser Error
Description: An error occurred during the parsing of a resource required to
service this request. Please review the following specific parse error
details and modify your source file appropriately.

Parser Error Message: Could not load type 'mytest.sk.cust omHeader'.

Source Error:
Line 1: <%@ Control Language="c#" AutoEventWireup ="True"
Codebehind="cus tomHeader.ascx. cs" inherits="'myte st.sk.customHea der"
TargetSchema="h ttp://schemas.microso ft.com/intellisense/ie5"%>
Line 2: <table width="100%">
Line 3: <tr>
Source File: /sk/customHeader.as cx Line: 1
--------------------------------------------------------------------------------
Version Information: Microsoft .NET Framework Version:2.0.507 27.42; ASP.NET
Version:2.0.507 27.210

any suggestions?

thanks
-a

Feb 23 '07 #2

Similar topics

5278

Python 2.3.5 make: *** [Parser/pgen] Error 1 Parser/grammar.o: I

by: Karalius, Joseph | last post by:

Can anyone explain what is happening here? I haven't found any useful info on Google yet. Thanks in advance. mmagnet:/home/jkaralius/src/zopeplone/Python-2.3.5 # make gcc -pthread -c -fno-strict-aliasing -DNDEBUG -g -O3 -Wall -Wstrict-prototypes -I. -I./Include -DPy_BUILD_CORE -o Modules/python.o Modules/python.c gcc -pthread -c -fno-strict-aliasing -DNDEBUG -g -O3 -Wall -Wstrict-prototypes -I. -I./Include -DPy_BUILD_CORE -o...

Python

412

parser error

by: ST | last post by:

Hi, I keep getting the parser error, and I have no idea why. I've tried a number of things including: 1)building/rebuilding about 100x 2)making sure all dll's are in the bin folder in the root of the web app 3)restarting IIS 4)recreating the virtual dir in IIS 5)playing with any and all settings I could find for the web app in IIS, including changing permissions 6)recopying the machineconfig file from my asp v1.4... onto my local server

.NET Framework

3875

Parser error

by: ST | last post by:

ASP.NET

9592

Parser Error Message

by: Kenneth P | last post by:

Hi, I get a Parser Error message when I try to start my asp.net app. Parser Error Message: Could not load type 'DiskoWeb.dLogin'. I have a code behind file and it's class name is dLogin. This the error message

ASP.NET

2131

Running an asp.net application on a remote share (UNC) - parser er

by: pj_servadmin | last post by:

Server Error in '/<applicationName>' Application -------------------------------------------------------------------------------- Parser Error Description: An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately. Parser Error Message: Could not load type 'Default.Global'. Source Error: Line 1: <%@ Application...

ASP.NET

7385

Continuous Form-Staying on current record

by: eighthman11 | last post by:

Hi everyone: This is probably a pretty simple problem but it is driving me nuts. Using Access 2000. I have a continuous form which list several thousand inventory items. The user can enter a order quantity on any given line. I have several different error checks depending on what the user enters in the quantity text box. What I need is a way to keep the user on that current record if he has any errors. This needs to be done if he...

Microsoft Access / VBA

16382

Linq; expression parser?

by: Marc Gravell | last post by:

In Linq, you can apparently get a meaningful body from and expression's .ToString(); random question - does anybody know if linq also includes a parser? It just seemed it might be a handy way to write a safe but easy implementation (i.e. no codedom) for an IBindingListView.Filter (by compiling to a Predicate<T>). Anybody know if this is possible at all? Marc

C# / C Sharp

3822

Eclipse CDT error parser for external tool

by: ups_genius | last post by:

Hi everyone! I created an error parser using the existing CDT stuff by basically copying some of the GNU / make / ... error parsers' code. I also added the extension point for the new error parser, and by debugging I see, that when activated, the new error parser is actually used to parse the regular build output. The reason for writing this error parser though was to parse the output produced by a batch file, run as "external tool"....

C / C++

1345

Clearing parser state of a bison generated parser

by: arvindkgs | last post by:

Iam using c lexer that is flex generated and a c++ parser that is bison generated. i have modified the parser to acccept only string input. I am calling the parser function yyparse in a loop and reading line by line of user input. I stop the loop if the input is "quit". The problem i am facing is that when input does'nt match any rule then, the parser stops abruptly, and at next iteration starts off at same state, expecting the rule...

C / C++

8349

What is ONU?

by: marktang | last post by:

ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look ! Part I. Meaning of...

General

8460

The easy way to turn off automatic updates for Windows 10/11

by: Hystou | last post by:

Overview: Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...

Windows Server

7296

AI Job Threat for Devs

by: agi2029 | last post by:

Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own.... Now, this would greatly impact the work of software developers. The idea...

Career Advice

6157

Access Europe - Using VBA to create a class based on a table - Wed 1 May

by: isladogs | last post by:

The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM). In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules. He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms. Adolph will...

Microsoft Access / VBA

4143

Trying to create a lan-to-lan vpn between two differents networks

by: TSSRALBI | last post by:

Hello I'm a network technician in training and I need your help. I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs. The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols. I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...

Networking - Hardware / Configuration

4281

Windows Forms - .Net 8.0

by: adsilva | last post by:

A Windows Forms form does not have the event Unload, like VB6. What one acts like?

Visual Basic .NET

2696

transfer the data from one system to another through ip address

by: 6302768590 | last post by:

Hai team i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system

C# / C Sharp

1906

How to add payments to a PHP MySQL app.

by: muto222 | last post by:

How can i add a mobile payment intergratation into php mysql website.

PHP

1585

Comprehensive Guide to Website Development in Toronto: Expert Insights from BSMN Consultancy

by: bsmnconsultancy | last post by:

In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...

General