Ok everyone i have dealing with this problem for a week and its starting to
get on my nerve. I am pretty new to the asp.net world. I am not new to .Net
only asp.net. So i hate a snag. right now im just doing some pretty simple
pages. I just started getting into master pages when i keep getting this
VERY irritating error:
Error 1 Metadata file
'C:\WINDOWS\Mic rosoft.NET\Fram ework\v2.0.5072 7\Temporary ASP.NET
Files\chapter2\ 17279c24\2b539f bd\App_Web_test masterpage.mast er.cdcab7d2.74e m-zze.dll'
could not be found
Ok of course i have searched google for solutions first with no resolve. I
have rebooted, reopened visual studio, cleared the contents of my temporary
asp.net folder. My web.config is as simple as you could get:
<?xml version="1.0"?>
<!--
Note: As an alternative to hand editing this file you can use the
web admin tool to configure settings for your application. Use
the Website->Asp.Net Configuration option in Visual Studio.
A full list of settings and comments can be found in
machine.config. comments usually located in
\Windows\Micros oft.Net\Framewo rk\v2.x\Config
-->
<configuratio n xmlns="http://schemas.microso ft.com/.NetConfigurati on/v2.0">
<appSettings/>
<connectionStri ngs/>
<system.web>
<!--
Set compilation debug="true" to insert debugging
symbols into the compiled page. Because this
affects performance, set this value to true only
during development.
-->
<compilation debug="true">
<assemblies>
<add assembly="Syste m.Windows.Forms , Version=2.0.0.0 , Culture=neutral ,
PublicKeyToken= B77A5C561934E08 9"/>
<add assembly="Syste m.Design, Version=2.0.0.0 , Culture=neutral ,
PublicKeyToken= B03F5F7F11D50A3 A"/></assemblies></compilation>
<!--
The <authentication section enables configuration
of the security authentication mode used by
ASP.NET to identify an incoming user.
-->
<authenticati on mode="Windows"/>
<!--
The <customErrorsse ction enables configuration
of what to do if/when an unhandled error occurs
during the execution of a request. Specifically,
it enables developers to configure html error pages
to be displayed in place of a error stack trace.
<customErrors mode="RemoteOnl y" defaultRedirect ="GenericErrorP age.htm">
<error statusCode="403 " redirect="NoAcc ess.htm" />
<error statusCode="404 " redirect="FileN otFound.htm" />
</customErrors>
-->
</system.web>
</configuration>
If i keep rebuilding the site over and over again usually it will rebuilt
from the 3 to 10 try. When i make a simple change again though and try to
rebuild i get the same dang thing. I have 2 simple pages a very simple
master page. I did try some of infragistics controls (2006 V3) but i have
removed all references (as you can see above from my web.conf) and removed
all the files they added to the project. I am running the web site just in
the web server packaged with vs 2005. Oh yes, i have SP1 for VS installed. I
have seen lots of people have this problem but no one seems to really have a
solution. Does anyone know whats going on? 5 1420
Howdy,
Is there a chance someone has added a reference to any of the project dlls?
Sometimes it happens when you vs automatically registers your custom controls.
See this topic: http://www.thescripts.com/forum/thread328655.html
--
Milosz
"Brent" wrote:
Ok everyone i have dealing with this problem for a week and its starting to
get on my nerve. I am pretty new to the asp.net world. I am not new to .Net
only asp.net. So i hate a snag. right now im just doing some pretty simple
pages. I just started getting into master pages when i keep getting this
VERY irritating error:
Error 1 Metadata file
'C:\WINDOWS\Mic rosoft.NET\Fram ework\v2.0.5072 7\Temporary ASP.NET
Files\chapter2\ 17279c24\2b539f bd\App_Web_test masterpage.mast er.cdcab7d2.74e m-zze.dll'
could not be found
Ok of course i have searched google for solutions first with no resolve. I
have rebooted, reopened visual studio, cleared the contents of my temporary
asp.net folder. My web.config is as simple as you could get:
<?xml version="1.0"?>
<!--
Note: As an alternative to hand editing this file you can use the
web admin tool to configure settings for your application. Use
the Website->Asp.Net Configuration option in Visual Studio.
A full list of settings and comments can be found in
machine.config. comments usually located in
\Windows\Micros oft.Net\Framewo rk\v2.x\Config
-->
<configuratio n xmlns="http://schemas.microso ft.com/.NetConfigurati on/v2.0">
<appSettings/>
<connectionStri ngs/>
<system.web>
<!--
Set compilation debug="true" to insert debugging
symbols into the compiled page. Because this
affects performance, set this value to true only
during development.
-->
<compilation debug="true">
<assemblies>
<add assembly="Syste m.Windows.Forms , Version=2.0.0.0 , Culture=neutral ,
PublicKeyToken= B77A5C561934E08 9"/>
<add assembly="Syste m.Design, Version=2.0.0.0 , Culture=neutral ,
PublicKeyToken= B03F5F7F11D50A3 A"/></assemblies></compilation>
<!--
The <authentication section enables configuration
of the security authentication mode used by
ASP.NET to identify an incoming user.
-->
<authenticati on mode="Windows"/>
<!--
The <customErrorsse ction enables configuration
of what to do if/when an unhandled error occurs
during the execution of a request. Specifically,
it enables developers to configure html error pages
to be displayed in place of a error stack trace.
<customErrors mode="RemoteOnl y" defaultRedirect ="GenericErrorP age.htm">
<error statusCode="403 " redirect="NoAcc ess.htm" />
<error statusCode="404 " redirect="FileN otFound.htm" />
</customErrors>
-->
</system.web>
</configuration>
If i keep rebuilding the site over and over again usually it will rebuilt
from the 3 to 10 try. When i make a simple change again though and try to
rebuild i get the same dang thing. I have 2 simple pages a very simple
master page. I did try some of infragistics controls (2006 V3) but i have
removed all references (as you can see above from my web.conf) and removed
all the files they added to the project. I am running the web site just in
the web server packaged with vs 2005. Oh yes, i have SP1 for VS installed. I
have seen lots of people have this problem but no one seems to really have a
solution. Does anyone know whats going on?
Nope. I have been the only one who had worked on this. I have never
referenced a project dll in this probject. It has been a single project the
whole time. The only thing i have referenced outside of the standard
microsoft runtime is infragistics stuff but like i said all that has been
removed including references, liscence dll added to the project, and some
images it added.
Ncage
"Milosz Skalecki [MCAD]" <mi*****@DONTLI KESPAMwp.plwrot e in message
news:4A******** *************** ***********@mic rosoft.com...
Howdy,
Is there a chance someone has added a reference to any of the project
dlls?
Sometimes it happens when you vs automatically registers your custom
controls.
See this topic: http://www.thescripts.com/forum/thread328655.html
--
Milosz
"Brent" wrote:
>Ok everyone i have dealing with this problem for a week and its starting to get on my nerve. I am pretty new to the asp.net world. I am not new to .Net only asp.net. So i hate a snag. right now im just doing some pretty simple pages. I just started getting into master pages when i keep getting this VERY irritating error: Error 1 Metadata file 'C:\WINDOWS\Mi crosoft.NET\Fra mework\v2.0.507 27\Temporary ASP.NET Files\chapter2 \17279c24\2b539 fbd\App_Web_tes tmasterpage.mas ter.cdcab7d2.74 em-zze.dll' could not be found
Ok of course i have searched google for solutions first with no resolve. I have rebooted, reopened visual studio, cleared the contents of my temporary asp.net folder. My web.config is as simple as you could get: <?xml version="1.0"?>
<!--
Note: As an alternative to hand editing this file you can use the
web admin tool to configure settings for your application. Use
the Website->Asp.Net Configuration option in Visual Studio.
A full list of settings and comments can be found in
machine.config .comments usually located in
\Windows\Micro soft.Net\Framew ork\v2.x\Config
-->
<configurati on xmlns="http://schemas.microso ft.com/.NetConfigurati on/v2.0">
<appSettings/>
<connectionStr ings/>
<system.web>
<!--
Set compilation debug="true" to insert debugging
symbols into the compiled page. Because this
affects performance, set this value to true only
during development.
-->
<compilation debug="true">
<assemblies>
<add assembly="Syste m.Windows.Forms , Version=2.0.0.0 , Culture=neutral , PublicKeyToken =B77A5C561934E0 89"/>
<add assembly="Syste m.Design, Version=2.0.0.0 , Culture=neutral , PublicKeyToken =B03F5F7F11D50A 3A"/></assemblies></compilation>
<!--
The <authentication section enables configuration
of the security authentication mode used by
ASP.NET to identify an incoming user.
-->
<authenticatio n mode="Windows"/>
<!--
The <customErrorsse ction enables configuration
of what to do if/when an unhandled error occurs
during the execution of a request. Specifically,
it enables developers to configure html error pages
to be displayed in place of a error stack trace.
<customError s mode="RemoteOnl y" defaultRedirect ="GenericErrorP age.htm">
<error statusCode="403 " redirect="NoAcc ess.htm" />
<error statusCode="404 " redirect="FileN otFound.htm" />
</customErrors>
-->
</system.web>
</configuration> If i keep rebuilding the site over and over again usually it will rebuilt from the 3 to 10 try. When i make a simple change again though and try to rebuild i get the same dang thing. I have 2 simple pages a very simple master page. I did try some of infragistics controls (2006 V3) but i have removed all references (as you can see above from my web.conf) and removed all the files they added to the project. I am running the web site just in the web server packaged with vs 2005. Oh yes, i have SP1 for VS installed. I have seen lots of people have this problem but no one seems to really have a solution. Does anyone know whats going on?
Good afternoon
it must be something you had installed before (what's chapter2? - is it
current application or an old tutorial demo app?) Make sure your Toolbox does
not contain any old components.
--
Milosz
"Brent" wrote:
Nope. I have been the only one who had worked on this. I have never
referenced a project dll in this probject. It has been a single project the
whole time. The only thing i have referenced outside of the standard
microsoft runtime is infragistics stuff but like i said all that has been
removed including references, liscence dll added to the project, and some
images it added.
Ncage
"Milosz Skalecki [MCAD]" <mi*****@DONTLI KESPAMwp.plwrot e in message
news:4A******** *************** ***********@mic rosoft.com...
Howdy,
Is there a chance someone has added a reference to any of the project
dlls?
Sometimes it happens when you vs automatically registers your custom
controls.
See this topic: http://www.thescripts.com/forum/thread328655.html
--
Milosz
"Brent" wrote:
Ok everyone i have dealing with this problem for a week and its starting
to
get on my nerve. I am pretty new to the asp.net world. I am not new to
.Net
only asp.net. So i hate a snag. right now im just doing some pretty
simple
pages. I just started getting into master pages when i keep getting this
VERY irritating error:
Error 1 Metadata file
'C:\WINDOWS\Mic rosoft.NET\Fram ework\v2.0.5072 7\Temporary ASP.NET
Files\chapter2\ 17279c24\2b539f bd\App_Web_test masterpage.mast er.cdcab7d2.74e m-zze.dll'
could not be found
Ok of course i have searched google for solutions first with no resolve.
I
have rebooted, reopened visual studio, cleared the contents of my
temporary
asp.net folder. My web.config is as simple as you could get:
<?xml version="1.0"?>
<!--
Note: As an alternative to hand editing this file you can use the
web admin tool to configure settings for your application. Use
the Website->Asp.Net Configuration option in Visual Studio.
A full list of settings and comments can be found in
machine.config. comments usually located in
\Windows\Micros oft.Net\Framewo rk\v2.x\Config
-->
<configuratio n
xmlns="http://schemas.microso ft.com/.NetConfigurati on/v2.0">
<appSettings/>
<connectionStri ngs/>
<system.web>
<!--
Set compilation debug="true" to insert debugging
symbols into the compiled page. Because this
affects performance, set this value to true only
during development.
-->
<compilation debug="true">
<assemblies>
<add assembly="Syste m.Windows.Forms , Version=2.0.0.0 , Culture=neutral ,
PublicKeyToken= B77A5C561934E08 9"/>
<add assembly="Syste m.Design, Version=2.0.0.0 , Culture=neutral ,
PublicKeyToken= B03F5F7F11D50A3 A"/></assemblies></compilation>
<!--
The <authentication section enables configuration
of the security authentication mode used by
ASP.NET to identify an incoming user.
-->
<authenticati on mode="Windows"/>
<!--
The <customErrorsse ction enables configuration
of what to do if/when an unhandled error occurs
during the execution of a request. Specifically,
it enables developers to configure html error pages
to be displayed in place of a error stack trace.
<customErrors mode="RemoteOnl y" defaultRedirect ="GenericErrorP age.htm">
<error statusCode="403 " redirect="NoAcc ess.htm" />
<error statusCode="404 " redirect="FileN otFound.htm" />
</customErrors>
-->
</system.web>
</configuration>
If i keep rebuilding the site over and over again usually it will rebuilt
from the 3 to 10 try. When i make a simple change again though and try to
rebuild i get the same dang thing. I have 2 simple pages a very simple
master page. I did try some of infragistics controls (2006 V3) but i have
removed all references (as you can see above from my web.conf) and
removed
all the files they added to the project. I am running the web site just
in
the web server packaged with vs 2005. Oh yes, i have SP1 for VS
installed. I
have seen lots of people have this problem but no one seems to really
have a
solution. Does anyone know whats going on?
Wow thanks Milosz. I removed all references to infragistics stuff in the
project and all but i still had them in the toolbox. I removed the
infragistics stuff from the toolbox and problem is solved. Why would items
in the toolbox cause this problem? Is it an infragistics problem or is there
something I did wrong? Its the latest version of their controls (2006 v3).
Thanks,
Brent
"Milosz Skalecki [MCAD]" <mi*****@DONTLI KESPAMwp.plwrot e in message
news:5B******** *************** ***********@mic rosoft.com...
Good afternoon
it must be something you had installed before (what's chapter2? - is it
current application or an old tutorial demo app?) Make sure your Toolbox
does
not contain any old components.
--
Milosz
"Brent" wrote:
>Nope. I have been the only one who had worked on this. I have never referenced a project dll in this probject. It has been a single project the whole time. The only thing i have referenced outside of the standard microsoft runtime is infragistics stuff but like i said all that has been removed including references, liscence dll added to the project, and some images it added.
Ncage "Milosz Skalecki [MCAD]" <mi*****@DONTLI KESPAMwp.plwrot e in message news:4A******* *************** ************@mi crosoft.com...
Howdy,
Is there a chance someone has added a reference to any of the project
dlls?
Sometimes it happens when you vs automatically registers your custom
controls.
See this topic: http://www.thescripts.com/forum/thread328655.html
--
Milosz
"Brent" wrote:
Ok everyone i have dealing with this problem for a week and its starting to get on my nerve. I am pretty new to the asp.net world. I am not new to .Net only asp.net. So i hate a snag. right now im just doing some pretty simple pages. I just started getting into master pages when i keep getting this VERY irritating error: Error 1 Metadata file 'C:\WINDOWS\Mi crosoft.NET\Fra mework\v2.0.507 27\Temporary ASP.NET Files\chapter2 \17279c24\2b539 fbd\App_Web_tes tmasterpage.mas ter.cdcab7d2.74 em-zze.dll' could not be found
Ok of course i have searched google for solutions first with no resolve. I have rebooted, reopened visual studio, cleared the contents of my temporary asp.net folder. My web.config is as simple as you could get: <?xml version="1.0"?>
<!--
Note: As an alternative to hand editing this file you can use the
web admin tool to configure settings for your application. Use
the Website->Asp.Net Configuration option in Visual Studio.
A full list of settings and comments can be found in
machine.config .comments usually located in
\Windows\Micro soft.Net\Framew ork\v2.x\Config
-->
<configurati on xmlns="http://schemas.microso ft.com/.NetConfigurati on/v2.0">
<appSettings/>
<connectionStr ings/>
<system.web>
<!--
Set compilation debug="true" to insert debugging
symbols into the compiled page. Because this
affects performance, set this value to true only
during development.
-->
<compilation debug="true">
<assemblies>
<add assembly="Syste m.Windows.Forms , Version=2.0.0.0 , Culture=neutral , PublicKeyToken =B77A5C561934E0 89"/>
<add assembly="Syste m.Design, Version=2.0.0.0 , Culture=neutral , PublicKeyToken =B03F5F7F11D50A 3A"/></assemblies></compilation>
<!--
The <authentication section enables configuration
of the security authentication mode used by
ASP.NET to identify an incoming user.
-->
<authenticatio n mode="Windows"/>
<!--
The <customErrorsse ction enables configuration
of what to do if/when an unhandled error occurs
during the execution of a request. Specifically,
it enables developers to configure html error pages
to be displayed in place of a error stack trace.
<customError s mode="RemoteOnl y" defaultRedirec t="GenericError Page.htm">
<error statusCode="403 " redirect="NoAcc ess.htm" />
<error statusCode="404 " redirect="FileN otFound.htm" />
</customErrors>
-->
</system.web>
</configuration> If i keep rebuilding the site over and over again usually it will rebuilt from the 3 to 10 try. When i make a simple change again though and try to rebuild i get the same dang thing. I have 2 simple pages a very simple master page. I did try some of infragistics controls (2006 V3) but i have removed all references (as you can see above from my web.conf) and removed all the files they added to the project. I am running the web site just in the web server packaged with vs 2005. Oh yes, i have SP1 for VS installed. I have seen lots of people have this problem but no one seems to really have a solution. Does anyone know whats going on?
Hi Brent,
I don't think it was your fault. It sometimes happens, especially when
controls are built into web application project instead of separate control
library.
Have a nice day
--
Milosz
"Brent" wrote:
Wow thanks Milosz. I removed all references to infragistics stuff in the
project and all but i still had them in the toolbox. I removed the
infragistics stuff from the toolbox and problem is solved. Why would items
in the toolbox cause this problem? Is it an infragistics problem or is there
something I did wrong? Its the latest version of their controls (2006 v3).
Thanks,
Brent
"Milosz Skalecki [MCAD]" <mi*****@DONTLI KESPAMwp.plwrot e in message
news:5B******** *************** ***********@mic rosoft.com...
Good afternoon
it must be something you had installed before (what's chapter2? - is it
current application or an old tutorial demo app?) Make sure your Toolbox
does
not contain any old components.
--
Milosz
"Brent" wrote:
Nope. I have been the only one who had worked on this. I have never
referenced a project dll in this probject. It has been a single project
the
whole time. The only thing i have referenced outside of the standard
microsoft runtime is infragistics stuff but like i said all that has been
removed including references, liscence dll added to the project, and some
images it added.
Ncage
"Milosz Skalecki [MCAD]" <mi*****@DONTLI KESPAMwp.plwrot e in message
news:4A******** *************** ***********@mic rosoft.com...
Howdy,
Is there a chance someone has added a reference to any of the project
dlls?
Sometimes it happens when you vs automatically registers your custom
controls.
See this topic: http://www.thescripts.com/forum/thread328655.html
--
Milosz
"Brent" wrote:
Ok everyone i have dealing with this problem for a week and its
starting
to
get on my nerve. I am pretty new to the asp.net world. I am not new to
.Net
only asp.net. So i hate a snag. right now im just doing some pretty
simple
pages. I just started getting into master pages when i keep getting
this
VERY irritating error:
Error 1 Metadata file
'C:\WINDOWS\Mic rosoft.NET\Fram ework\v2.0.5072 7\Temporary ASP.NET
Files\chapter2\ 17279c24\2b539f bd\App_Web_test masterpage.mast er.cdcab7d2.74e m-zze.dll'
could not be found
Ok of course i have searched google for solutions first with no
resolve.
I
have rebooted, reopened visual studio, cleared the contents of my
temporary
asp.net folder. My web.config is as simple as you could get:
<?xml version="1.0"?>
<!--
Note: As an alternative to hand editing this file you can use the
web admin tool to configure settings for your application. Use
the Website->Asp.Net Configuration option in Visual Studio.
A full list of settings and comments can be found in
machine.config. comments usually located in
\Windows\Micros oft.Net\Framewo rk\v2.x\Config
-->
<configuratio n
xmlns="http://schemas.microso ft.com/.NetConfigurati on/v2.0">
<appSettings/>
<connectionStri ngs/>
<system.web>
<!--
Set compilation debug="true" to insert debugging
symbols into the compiled page. Because this
affects performance, set this value to true only
during development.
-->
<compilation debug="true">
<assemblies>
<add assembly="Syste m.Windows.Forms , Version=2.0.0.0 , Culture=neutral ,
PublicKeyToken= B77A5C561934E08 9"/>
<add assembly="Syste m.Design, Version=2.0.0.0 , Culture=neutral ,
PublicKeyToken= B03F5F7F11D50A3 A"/></assemblies></compilation>
<!--
The <authentication section enables configuration
of the security authentication mode used by
ASP.NET to identify an incoming user.
-->
<authenticati on mode="Windows"/>
<!--
The <customErrorsse ction enables configuration
of what to do if/when an unhandled error occurs
during the execution of a request. Specifically,
it enables developers to configure html error pages
to be displayed in place of a error stack trace.
<customErrors mode="RemoteOnl y"
defaultRedirect ="GenericErrorP age.htm">
<error statusCode="403 " redirect="NoAcc ess.htm" />
<error statusCode="404 " redirect="FileN otFound.htm" />
</customErrors>
-->
</system.web>
</configuration>
If i keep rebuilding the site over and over again usually it will
rebuilt
from the 3 to 10 try. When i make a simple change again though and try
to
rebuild i get the same dang thing. I have 2 simple pages a very simple
master page. I did try some of infragistics controls (2006 V3) but i
have
removed all references (as you can see above from my web.conf) and
removed
all the files they added to the project. I am running the web site
just
in
the web server packaged with vs 2005. Oh yes, i have SP1 for VS
installed. I
have seen lots of people have this problem but no one seems to really
have a
solution. Does anyone know whats going on?
This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics |
by: Nikola Milutinovic |
last post by:
Hi all.
I'm not subscribed to the list, so all replies to me mail directly.
I ran into a small problem, for which we have found a workaround. I was compiling PostgreSQL v7.4.1 and it's PL/Python module. Compilation failed on lines which had this:
typedef struct PLyPlanObject {
PyObject_HEAD;
...
} PLyPlanObject;
|
by: Martin Bless |
last post by:
I need to access a MSSQL database (MS-Sql, not MySQL!)and would very
much like to use mssql-0.09.tar.gz which is available from
http://www.object-craft.com.au/projects/mssql/download.html
Unfortunately the binary for Python-2.4 isn't available yet and I'd
hate to step back to a previous version.
I'm glad I managed to set up my XP machine to being able to compile
extensions using the VC++ toolkit which freely availbale from MS. See
|
by: Arturo DiDonna |
last post by:
Hello everyone. I am trying to compile someone else code and I am
stuck with compilation problems using
the g++ 3.3 compiler. Basically, when compiling the following code, I
get this error message:
parsefcns.cc: In function `void get_token(std::ifstream*, char**)':
parsefcns.cc:57: error: cannot convert `std::basic_string<char,
std::char_traits<char>, std::allocator<char> >' to `char*' in
assignment
make: *** Error 1
|
by: modemer |
last post by:
Hello,
I got weird compiling message similar like following when I compiled my
simple code on Sun 5.8 with CC WorkShop 6 update 2 C++ 5.3.
CC -g -o myclass.o -c myclass.cpp
CC -g -o main.o -c main.cpp
CC -g -L/usr/lib -lsocket -lnsl -o main myclass.o main.o
__1cH__rwstdJ__rb_tree4CpknJmyclassHCSOCKET_nDstdEpair4Ck4n0BNCSOCKEVENTMGRJ
SOCKEVENT___n0AL__select1st4n0G_C4__n0DEless4C4__n0DJallocator4n0G____Efind6
|
by: David W. Fenton |
last post by:
Today I was working on a hideous old app that I created a long time
ago that does a lot of showing/hiding/resizing of fields on one of
the forms. I had used constants to store reference values for many
of the top/height/left settings. I noticed that some of the
constants were defined by using other constant values, and I was
impressed that VBA could do that. Here's an example:
Const row1Top = 1.0208 * 1440 ' top of first row
Const...
| |
by: Dmitri Shvetsov |
last post by:
Hi All,
Did somebody have a problem compiling some solution in VS2003? I get the
error every time that some files are locked and are using by another
process. I repeat compiling again and again and finally the compilation can
be finished successfully after several tries. What can be a reason of that?
I turned off my antivirus software, no results. Maybe it's just a bug of the
VS2003? I installed the latest service pack for the Studio...
|
by: Aaron Queenan |
last post by:
When I build a C++ library to .NET using the managed C++ compiler, I get the
following error message:
Linking...
LINK : error LNK2020: unresolved token (0A000005) _CrtDbgReport
LINK : error LNK2020: unresolved token (0A000007) memset
LINK : error LNK2020: unresolved token (0A000008) free
LINK : error LNK2020: unresolved token (0A00000A) atexit
LINK : error LNK2020: unresolved token (0A000028) wcscpy
LINK : error LNK2020: unresolved...
|
by: Rudy Ray Moore |
last post by:
Hi guys,
I just upgraded to "Visual Studio .net 2003 7.1 c++" from VS6.
Some things I like (proper for loop variable scoping, for example), but some
other things are troubling me.
One annoying behavior is that the text editor often "hangs" (doesn't let me
type) while compiling. Is there a way to fix this so it behaves more like
VS6 (editor does not hang while compiling)?
|
by: erkidevries |
last post by:
Problem compiling Tkinter program with bmp images (using py2exe)
I have a Tkinter gui program that uses bmp as backgrounds.
The program itself works when I run from the source.
I placed the .bmp files in the same folder as the script.
I run my .py script (from IDLE) and all the backgrounds are loaded as intended.
in my script I load the images like this:
|
by: WebSnozz |
last post by:
I have an application written in C that does a lot of low level stuff.
It does a lot of things like casting from void*'s. I want to create a
new GUI for it in either C# or MC++, but reuse the existing code.
The options I've considered so far:
1. Create a new MC++ GUI project and add the *.c files to them and mark
them with pragma unamanged. However, the /clr option does not compile
*.c files, so I rename them to *.cpp, and now they...
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
| |
by: jinu1996 |
last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth.
The Art of Business Website Design
Your website is...
|
by: Hystou |
last post by:
Overview:
Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
|
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
|
by: conductexam |
last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one.
At the time of converting from word file to html my equations which are in the word document file was convert into image.
Globals.ThisAddIn.Application.ActiveDocument.Select();...
|
by: adsilva |
last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
|
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
| |
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
|
by: bsmnconsultancy |
last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...
| |