On winXP with VSTE for software developers installed,
I downloaded and installed vs2005 sp1
during the install i was informed that I had to uninstall the web
application project package
I did the uninstall of the wap and restarted the install
everything seemed to go fine with the sp install after that
however when I try to open an existing web application project or create a
new web application project i get the following error :
Package Load Failure
Package
'Microsoft.Visu alStudio.Web.Ap plication.WAPac kage,Microsoft. VisualStudio.We b.Application,V ersion=8.0.0.0, Culture=neutral ,
PublicKeyToken= b03f5f7f11d50a3 a' has failed to load properly ( GUID =
{349C5850-65DF-11DA-9384-00065B846F21}.) Please contact package
vendor for assistance. ...
restarting the machine , reinstalling the sp has had no effect.
googling for this error has returned no results.
I don't see any uninstall for SP1 - so short of reinstalling windows and
VS - what do i do ?
Gerry
6  4111 
Run DEVENV /InstallVSTempla tes
from a command prompt.
Peter
Site: http://www.eggheadcafe.com
UnBlog: http://petesbloggerama.blogspot.com
Short urls & more: http://ittyurl.net
"gerry" wrote:
On winXP with VSTE for software developers installed,
I downloaded and installed vs2005 sp1
during the install i was informed that I had to uninstall the web
application project package
I did the uninstall of the wap and restarted the install
everything seemed to go fine with the sp install after that
however when I try to open an existing web application project or create a
new web application project i get the following error :
Package Load Failure
Package
'Microsoft.Visu alStudio.Web.Ap plication.WAPac kage,Microsoft. VisualStudio.We b.Application,V ersion=8.0.0.0, Culture=neutral ,
PublicKeyToken= b03f5f7f11d50a3 a' has failed to load properly ( GUID =
{349C5850-65DF-11DA-9384-00065B846F21}.) Please contact package
vendor for assistance. ...
restarting the machine , reinstalling the sp has had no effect.
googling for this error has returned no results.
I don't see any uninstall for SP1 - so short of reinstalling windows and
VS - what do i do ?
Gerry
Thanks Peter but this didn't help - same problem persists
"Peter Bromberg [C# MVP]" <pb*******@yaho o.yabbadabbadoo .comwrote in
message news:DE******** *************** ***********@mic rosoft.com...
Run DEVENV /InstallVSTempla tes
from a command prompt.
Peter
Site: http://www.eggheadcafe.com
UnBlog: http://petesbloggerama.blogspot.com
Short urls & more: http://ittyurl.net
"gerry" wrote:
>On winXP with VSTE for software developers installed,
I downloaded and installed vs2005 sp1
during the install i was informed that I had to uninstall the web
application project package
I did the uninstall of the wap and restarted the install
everything seemed to go fine with the sp install after that
however when I try to open an existing web application project or create
a
new web application project i get the following error :
Package Load Failure
Package
'Microsoft.Vis ualStudio.Web.A pplication.WAPa ckage,Microsoft .VisualStudio.W eb.Application, Version=8.0.0.0 ,Culture=neutra l,
PublicKeyToken =b03f5f7f11d50a 3a' has failed to load properly ( GUID =
{349C5850-65DF-11DA-9384-00065B846F21}.) Please contact package
vendor for assistance. ...
restarting the machine , reinstalling the sp has had no effect.
googling for this error has returned no results.
I don't see any uninstall for SP1 - so short of reinstalling windows and
VS - what do i do ?
Gerry
I went to Add or Remove Programs, find Microsoft Visual Studio 2005 Web
Application Projects.
Click on it, then click on "Change"
Choose Repair on the Popup Dialog.
Fixed this issue for me
Stevepro
gerry wrote:
Thanks Peter but this didn't help - same problem persists
"Peter Bromberg [C# MVP]" <pb*******@yaho o.yabbadabbadoo .comwrote in
message news:DE******** *************** ***********@mic rosoft.com...
Run DEVENV /InstallVSTempla tes
from a command prompt.
Peter
Site: http://www.eggheadcafe.com
UnBlog: http://petesbloggerama.blogspot.com
Short urls & more: http://ittyurl.net
"gerry" wrote:
On winXP with VSTE for software developers installed,
I downloaded and installed vs2005 sp1
during the install i was informed that I had to uninstall the web
application project package
I did the uninstall of the wap and restarted the install
everything seemed to go fine with the sp install after that
however when I try to open an existing web application project or create
a
new web application project i get the following error :
Package Load Failure
Package
'Microsoft.Visu alStudio.Web.Ap plication.WAPac kage,Microsoft. VisualStudio.We b.Application,V ersion=8.0.0.0, Culture=neutral ,
PublicKeyToken= b03f5f7f11d50a3 a' has failed to load properly ( GUID =
{349C5850-65DF-11DA-9384-00065B846F21}.) Please contact package
vendor for assistance. ...
restarting the machine , reinstalling the sp has had no effect.
googling for this error has returned no results.
I don't see any uninstall for SP1 - so short of reinstalling windows and
VS - what do i do ?
Gerry
Hi Steve,
I had to do a complete uninstall of WAP before the SP would install. It
doesn't appear in the Add/Remove applictaion list - did you reinstall the
older pre-SP1 WAP package?
I am just waiting for a chance to do a complete os reinstall assuming that
that will fix things up.
Gerry
<st***@code5sys tems.comwrote in message
news:11******** **************@ m58g2000cwm.goo glegroups.com.. .
>I went to Add or Remove Programs, find Microsoft Visual Studio 2005 Web
Application Projects.
Click on it, then click on "Change"
Choose Repair on the Popup Dialog.
Fixed this issue for me
Stevepro
gerry wrote:
>Thanks Peter but this didn't help - same problem persists
"Peter Bromberg [C# MVP]" <pb*******@yaho o.yabbadabbadoo .comwrote in
message news:DE******** *************** ***********@mic rosoft.com...
Run DEVENV /InstallVSTempla tes
from a command prompt.
Peter
Site: http://www.eggheadcafe.com
UnBlog: http://petesbloggerama.blogspot.com
Short urls & more: http://ittyurl.net
"gerry" wrote:
On winXP with VSTE for software developers installed,
I downloaded and installed vs2005 sp1
during the install i was informed that I had to uninstall the web
application project package
I did the uninstall of the wap and restarted the install
everything seemed to go fine with the sp install after that
however when I try to open an existing web application project or
create
a
new web application project i get the following error :
Package Load Failure
Package
'Microsoft.Vis ualStudio.Web.A pplication.WAPa ckage,Microsoft .VisualStudio.W eb.Application, Version=8.0.0.0 ,Culture=neutra l,
PublicKeyToken =b03f5f7f11d50a 3a' has failed to load properly ( GUID =
{349C5850-65DF-11DA-9384-00065B846F21}.) Please contact package
vendor for assistance. ...
restarting the machine , reinstalling the sp has had no effect.
googling for this error has returned no results.
I don't see any uninstall for SP1 - so short of reinstalling windows
and
VS - what do i do ?
Gerry
Hi,
I've reinstalled the Web Application Projects
( http://msdn2.microsoft.com/en-us/asp.net/aa336618.aspx, this itself
wants another component installed: VS80-KB915364-X86-ENU.exe). Now
everythign is working ok agian.
Hope this helps
Ian
gerry wrote:
Hi Steve,
I had to do a complete uninstall of WAP before the SP would install. It
doesn't appear in the Add/Remove applictaion list - did you reinstall the
older pre-SP1 WAP package?
I am just waiting for a chance to do a complete os reinstall assuming that
that will fix things up.
Gerry
<st***@code5sys tems.comwrote in message
news:11******** **************@ m58g2000cwm.goo glegroups.com.. .
I went to Add or Remove Programs, find Microsoft Visual Studio 2005 Web
Application Projects.
Click on it, then click on "Change"
Choose Repair on the Popup Dialog.
Fixed this issue for me
Stevepro
gerry wrote:
Thanks Peter but this didn't help - same problem persists
"Peter Bromberg [C# MVP]" <pb*******@yaho o.yabbadabbadoo .comwrote in
message news:DE******** *************** ***********@mic rosoft.com...
Run DEVENV /InstallVSTempla tes
from a command prompt.
Peter
Site: http://www.eggheadcafe.com
UnBlog: http://petesbloggerama.blogspot.com
Short urls & more: http://ittyurl.net
"gerry" wrote:
On winXP with VSTE for software developers installed,
I downloaded and installed vs2005 sp1
during the install i was informed that I had to uninstall the web
application project package
I did the uninstall of the wap and restarted the install
everything seemed to go fine with the sp install after that
however when I try to open an existing web application project or
create
a
new web application project i get the following error :
Package Load Failure
Package
'Microsoft.Visu alStudio.Web.Ap plication.WAPac kage,Microsoft. VisualStudio.We b.Application,V ersion=8.0.0.0, Culture=neutral ,
PublicKeyToken= b03f5f7f11d50a3 a' has failed to load properly ( GUID =
{349C5850-65DF-11DA-9384-00065B846F21}.) Please contact package
vendor for assistance. ...
restarting the machine , reinstalling the sp has had no effect.
googling for this error has returned no results.
I don't see any uninstall for SP1 - so short of reinstalling windows
and
VS - what do i do ?
Gerry
so does this mean that WAP is not actually installed as part of SP1 ?
<ia******@googl email.comwrote in message
news:11******** *************@5 1g2000cwl.googl egroups.com...
Hi,
I've reinstalled the Web Application Projects
(http://msdn2.microsoft.com/en-us/asp.net/aa336618.aspx, this itself
wants another component installed: VS80-KB915364-X86-ENU.exe). Now
everythign is working ok agian.
Hope this helps
Ian
gerry wrote:
>Hi Steve,
I had to do a complete uninstall of WAP before the SP would install. It
doesn't appear in the Add/Remove applictaion list - did you reinstall the
older pre-SP1 WAP package?
I am just waiting for a chance to do a complete os reinstall assuming
that
that will fix things up.
Gerry
<st***@code5sy stems.comwrote in message
news:11******* *************** @m58g2000cwm.go oglegroups.com. ..
>I went to Add or Remove Programs, find Microsoft Visual Studio 2005 Web
Application Projects.
Click on it, then click on "Change"
Choose Repair on the Popup Dialog.
Fixed this issue for me
Stevepro
gerry wrote:
Thanks Peter but this didn't help - same problem persists
"Peter Bromberg [C# MVP]" <pb*******@yaho o.yabbadabbadoo .comwrote in
message news:DE******** *************** ***********@mic rosoft.com...
Run DEVENV /InstallVSTempla tes
from a command prompt.
Peter
Site: http://www.eggheadcafe.com
UnBlog: http://petesbloggerama.blogspot.com
Short urls & more: http://ittyurl.net
"gerry" wrote:
On winXP with VSTE for software developers installed,
I downloaded and installed vs2005 sp1
during the install i was informed that I had to uninstall the web
application project package
I did the uninstall of the wap and restarted the install
everything seemed to go fine with the sp install after that
however when I try to open an existing web application project or
create
a
new web application project i get the following error :
Package Load Failure
Package
'Microsoft.Vis ualStudio.Web.A pplication.WAPa ckage,Microsoft .VisualStudio.W eb.Application, Version=8.0.0.0 ,Culture=neutra l,
PublicKeyToken =b03f5f7f11d50a 3a' has failed to load properly ( GUID
=
{349C5850-65DF-11DA-9384-00065B846F21}.) Please contact package
vendor for assistance. ...
restarting the machine , reinstalling the sp has had no effect.
googling for this error has returned no results.
I don't see any uninstall for SP1 - so short of reinstalling
windows
and
VS - what do i do ?
Gerry
This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics | |
by: Arun Bhalla |
last post by:
I'm working with VS.NET 2003 and .NET 1.1 (not SP1) on Windows XP SP1. My
application is using the Windows Installer Bootstrap. (I may have also
installed a module which detects requirements (.NET 1.1 -> MsiNetAssembly
Support.) I have a few issues and questions regarding the MSI and its
properties.
* This may be my biggest annoyance at the moment. When the installer creates
the target directory, it's setting them as read-only. When the...
|
by: EmmanuelE |
last post by:
Just installed VS2003 and tried a hello world app. Getting 404 error even
when I explictly specify the start page in the url.
In IIS Mgr, App has .aspx mapped to
C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\aspnet_isapi.dll.
Interestingly, an app that I installed BEFORE installing VS2003 works. I
compared its properties to new apps generated by VS2003 and only difference I
see is that the new apps have the "Local Path" box in the...
|
by: TM |
last post by:
When I run an ASP.Net application I am getting the following error:
"Error while trying to run project: Unable to start debugging on the web
server. The project is not configured to be debugged."
I checked and made sure the Machine Debug Manager is running on the server,
made sure the web.comfit file has debug=true. Mine is:
<compilation defaultLanguage="vb" debug="true" />
I also checked the directory executions permissions and it...
|
by: Dave |
last post by:
I have an old Visual Studio 2001 VB ASP.Net application; really all I have
are the folders and files from the web server.
How can I "hook" this back up to Visual Studio 2003 so I can update it?
I copied the files and folders to the C:\inetpub\wwwroot directory and
created a web application in IIS Manager. Now I can open the default page
in IE. But I could not create a project with the same name in VS.
I copied the files to the...
|
by: Chris Dunaway |
last post by:
This is a repost of an issue that I did not get any responses on, so I
thought I'd try it again.
I just installed VS.Net 2003 Ent. Arch. on a machine with Windows XP Pro.
The installation went without any errors.
When I attempt to create a new project (either VB or C#), a messagebox pops
up saying that there was a NullReferenceException and the form designer has
a big red cross (red X) through it. This also happens if I just add a...
| | |
by: Parrot |
last post by:
After installing Visual Studio 2005 I find that any program with an .aspx
extension is automatically included in the project. This creates many
compile errors because some of these .aspx programs are prototype programs
and are not meant to be compiled. If I exclude the program it changes the
extension to '.exclude.' Is there any way to exclude a program from the
project without changing the extension to '.exclude'? Or can I make it keep...
|
by: uupi_duu |
last post by:
Hello,
Has VS.Net 2005 SP1 changed C# WebApp's project files?
Can't open it anymore without installing SP1.
Anyone know what is behind this?
Cheers,
|
by: geethahathikal |
last post by:
i'm getting the following errors while installing kfs.. i'm not able to install
the required softwares for kfs thats is cmake, log4cpp.
the errors i'm getting are..
error while installing log4cpp
make: Leaving directory `/usr/local/log4cpp-0.3.5rc3/config'
Making install in src
make: Entering directory `/usr/local/log4cpp-0.3.5rc3/src'
|
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look !
Part I. Meaning of...
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
|
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
| | |
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: conductexam |
last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one.
At the time of converting from word file to html my equations which are in the word document file was convert into image.
Globals.ThisAddIn.Application.ActiveDocument.Select();...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
|
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
|
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
| |
