Hi All,
I am trying to host a site with an outside vendor which contains
crystal reports. I am copying all the files but when I run the crystal
reports i get the following error: "keycodeV2. dll missing or invalid"
There is no problem when i deploy the site to another machine because
at that time i include all the merge modules. But now, i am copying the
files to the vendor location...henc e the problem.
Can anyone suggest a solution to this problem?
Thanks,
Akshay 3 1102
Hi,
while include the merge modules, you should fill the product key for the
Reg*.* some msi file i am not sure about that. you can find out very easily.
You can get the product key from the installed Visual Studio in your PC.
I am sure, you can solve this problem by doing this.
regards,
Murali
"akki" wrote:
Hi All,
I am trying to host a site with an outside vendor which contains
crystal reports. I am copying all the files but when I run the crystal
reports i get the following error: "keycodeV2. dll missing or invalid"
There is no problem when i deploy the site to another machine because
at that time i include all the merge modules. But now, i am copying the
files to the vendor location...henc e the problem.
Can anyone suggest a solution to this problem?
Thanks,
Akshay
Hi,
I am not deploying the application.... .merely coying it to a different
server. So i cannot include merge modules in my project. Deployment is
not an issue.I have managed to do that successfully in the past. But
now I am trying to copy the project....that s when the problem arises.
Hope you understood my problem...
Any help would be appreciated..
Thanks,
Akshay
Ok, you are using VS 2003 or VS 2005?
I hope we can not run the crystal reports without having the merge modules.
I understood that, you are coping the application, before that you need to
check Vendor's Machine is haing the Merge modules or not? If Vendor's machine
is having the .Framework 1.1, 1.1 will not install merge modules
automatically, i am not sure about 2.0, we need to check.
One more thing,
If you are using VS 2003,
by deplying asp.net application with merge modules crystal reports are
working fine. By coping the asp.net application you are not including the
merge modules, i hope, without having the merge modules, asp.net application
can not run the crystal reports.
If you are using VS 2005,
Coping means, Publish the ASP.Net application to Vendors machine in VS 2005.
actually, in this case i am not sure we need to publish the asp.net
application with merge modules or not.
In My Experience, when i was using the VS 2003, i deployed the asp.net
application with merge modules, i got the same error "keycodeV2. dll missing
or invalid". Once i specified the Product Key of crystal. Then its worked
fine.
Anyway please check and correct me if any thing wrong. I know that, This
problemis very dangoures. And also please let me know if you already solved
the problem.
Thank you.
regards,
Murali This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics |
by: kristoff plasun |
last post by:
I have a problem with a C++ DCOM application that
prints Crystal Reports with data from Oracle.
The SQL query is relatively complex but when
the report is printed from the Crystal Reports
designer it shows up very fast. When the report
is printed from my application it takes about
ten times as long to get the report to appear.
When...
|
by: Grant Stanley |
last post by:
I'm developing an application in VS.Net 2003 using C#, which uses Crystal
Reports.
When creating each report, crystal asks where the database to use is, so I
specify our SQL server using the ADO option. The problem is that these
database settings seem to get compiled into the report, so when we take the
application to our client it won't...
|
by: GC |
last post by:
HI,
I'am using Crystal Report with visual Studio .NEt 2003
When i make a report using a store procedure, I can not see all the fields
of the store proc and i'm suppose to see those fields. I'm suppose to see a
"+" sign at the left of the store procedure name in the Field Explorer section
When we click on the sign "+" we see all the...
|
by: Robin Cushman |
last post by:
Hi all,
I need some help -- I'm working with an A2K database, using DAO, and
am trying to read records into a Crystal Report and then export it to
a folder on our network as an Excel spreadsheet. I'm having trouble
with my code at the point at which it hits ".ReadRecords" -- the
module just runs and runs without generating anything. I've...
|
by: Deasun |
last post by:
I need some help please!
Crystal is driving me nuts.
Heres my code so far, see below.
Problem:
On the .export() line it comes back with error #5 Login failed!
I know the login info is good so why is the bloody thing doing this.
The paths have been checked and are correct.
The crystal Report is a .rpt file. Not one created in the VS.net...
| |
by: Milan Todorovic |
last post by:
Hello,
I need help. I have experience in ASP.NET programming, but this is my first
dealing with Crystal Reports. I'm trying to make the most basic report
purely for testing purposes: connect to the remote SQL DB and create a
report on one of the tables. Every time I do it, I get the Logon Failed
error...
|
by: LP |
last post by:
I am using (trying to) CR version XI, cascading parameters feature works it
asks user to enter params. But if page is resubmitted. It prompts for params
again. I did set ReuseParameterValuesOnRefresh="True" in a viewer, but it
still doesn't work. Did anyone run into this problem. What's the solution?
Please help.
Thank you
|
by: Peter Proost |
last post by:
Hi Group,
I've got an interesting problem, I don't know if this is the right group but
I think so because everything I've read about it so far says it's a .net
problem. Here's the problem, we're using crystal reports 9 and vb.net and
we're using the crystalrepotViewer to show our reports. But every time we
open a report the connection to or...
|
by: FeveZ |
last post by:
I've been stuck on a problem now for ages and i'm about ready to pack my
project in because of it lol.
OK here is my scenario.
I have an existing Crystal Report, which I have added to my solution and
published it as a webservice. This report takes it data from an SQL server on
another machine.
The user will have a windows form in a...
|
by: =?Utf-8?B?cmtibmFpcg==?= |
last post by:
How can I stop receiving this message while calling a crystal report?
"The report you requested requires further information."
Thanks
|
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main...
| |
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language...
|
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed.
This is as boiled down as I can make it. ...
|
by: jinu1996 |
last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that...
|
by: Hystou |
last post by:
Overview:
Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For...
|
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes...
| |
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
|
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
| |