This should be impossible, but for some reason, people are not getting
individual sessions.
They start a session. I set the session("applic ation") variable to the
unique number generated by an identity column on our sql server. I
only set session("applic ation") at the begiinning and it should stay
the same as they fill out the application. But session("applic ation")
is not staying the same. When another user starts the application, and
session("applic ation") is set for them, it overwrites everyone elses
session("applic ation"). So session("applic ation") which must remain
unchanged, is changed!
I do use cookieless session state, but cookieless sessions were working
for months before the problem started. The application that worked
fine for months before the problem started. We have made changes to
the sql server and web server and application code, but I can't figure
out how these changes could affect the application in such a way. You
shouldn't be able to cross sessions even if you wanted to.
Anything come to mind?
1  1715 
Sounds kinda scary to me. But, as you mentioned, you've made changes to the
Sql Server, the webServer, and application code.
So essentially, now you need to put on your detective hat and go backwards,
and find out what it was that you changed that has caused this fiasco.
For us here who've never even seen the code, it would simply be a guessing
game.
And, yes, it is rare and near impossible (provided everything is working
properly) for users to get other users' sessions.
Good Luck!
Peter
--
Co-founder, Eggheadcafe.com developer portal: http://www.eggheadcafe.com
UnBlog: http://petesbloggerama.blogspot.com
"fi*****@gmail. com" wrote: This should be impossible, but for some reason, people are not getting
individual sessions.
They start a session. I set the session("applic ation") variable to the
unique number generated by an identity column on our sql server. I
only set session("applic ation") at the begiinning and it should stay
the same as they fill out the application. But session("applic ation")
is not staying the same. When another user starts the application, and
session("applic ation") is set for them, it overwrites everyone elses
session("applic ation"). So session("applic ation") which must remain
unchanged, is changed!
I do use cookieless session state, but cookieless sessions were working
for months before the problem started. The application that worked
fine for months before the problem started. We have made changes to
the sql server and web server and application code, but I can't figure
out how these changes could affect the application in such a way. You
shouldn't be able to cross sessions even if you wanted to.
Anything come to mind?
This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics | |
by: leegold2 |
last post by:
Probably a newbie question about "state":
My problem is I have a search form, so user enters a keyword <enter>,
then this form posts to another page were the result are displayed. But
this display page uses pagination to break the results up into several
subsequent pages. The 1st page is OK, but 2nd...last display pages loose
the key word variable I initially posted.
Seems I could keep passing the keyword with GET, I already use
GET...
|
by: Nicolae Fieraru |
last post by:
Hi All,
I have a lot of problems with the web site www.ggsurf.com.au I host on
www.gnxonline.com and I want to find out if it is my own problem or theirs.
I try to use session cookies and it doesn't work fine. Eventually I created
some test scripts, which can be found in here:
www.ggsurf.com.au/info.asp
There is a link to Set the Session("TransactionID") = 25 and the page
|
by: D. Shane Fowlkes |
last post by:
This is a repost (pasted below). Since my original post, I've double
checked the system clock and set all IIS Session Timeout values to 10
minutes. Still ...the problem occurs. I've also installed Deep Metrix Live
Stats 6.2 XPS just to make sure nothing really strange was going on was
going on. Still....the sessions only increment...or should I say my counter
in my asax file.... and never goes down.
If it matters, this machine is...
|
by: David Lozzi |
last post by:
Howdy,
I'm new to classes. Below is my class User. (is this a reserved namespace or
class?) It works great, kind of. If I specify the username and password, the
correct firstname and lastname are returned. For example, username dlozzi,
password fun. It returns David Lozzi as full name. If I login as someone
else on another computer, say username dsmith and password fun2, the second
computer displays the correct fullname. HOWEVER if I...
|
by: jensen bredal |
last post by:
Hello,
i'm struggling with a somehow badly understood session scenario.
I provide acces to my pages based on form authentication using
Session cookies.
Som of my pages are supposed to be running continuously and refreshing once
an hour.
I there set timeout= 61 in <sessionState section and on my page it says
<meta http-equiv="refresh" content="3600">.
I also set timeout=120 in the <forms section of web.config to make sure
| | |
by: COHENMARVIN |
last post by:
I have a form with a Submit button. The user fills out the form,
clicks the submit button, and then the page posts back to itself.
Every time the page posts back to itself, the "Page_Load" event fires.
So if the user first types the URL of the page in the browser, the
"Page_Load" event fires. Then he hits submit, and the form contents
are posted back, so the "Page_Load" event fires again. The form
appears again (I clear its contents),...
|
by: Martin Feuersteiner |
last post by:
Dear Group
I'm having a very weird problem. Any hints are greatly appreciated.
I'm returning two values from a MS SQL Server 2000 stored procedure to my
Webapplication and store them in sessions.
Like This:
prm4 = cmd1.CreateParameter
With prm4
|
by: na |
last post by:
I am using form authentication and InProc cookieless session. The
strange thing is that when an authenticated user try to navigate to any
page that is in subfolder of the application root, the session is
restarted and new session id is generated. Thus the user would never be
able to access those pages because each page's InitializeComponent()
checks if (Session.Keys.Count == 0). If yes, then server transfer the
request to login.aspx...
|
by: fizbang |
last post by:
This should be impossible, but for some reason, people are not getting
individual sessions.
They start a session. I set the session("application") variable to the
unique number generated by an identity column on our sql server. I
only set session("application") at the begiinning and it should stay
the same as they fill out the application. But session("application")
is not staying the same. When another user starts the application,...
|
by: =?ISO-8859-1?Q?Lasse_V=E5gs=E6ther_Karlsen?= |
last post by:
I get the above error in some of the ASP.NET web applications on a
server, and I need some help figuring out how to deal with it.
This is a rather long post, and I hope I have enough details that
someone who bothers to read all of it have some pointers.
Note, I have posted the stack trace and the code exhibiting the problem
further down so if you want to start by reading that, search for +++
Also note that I am unable to reproduce...
|
by: jinu1996 |
last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth.
The Art of Business Website Design
Your website is...
| | |
by: Hystou |
last post by:
Overview:
Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
|
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: conductexam |
last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one.
At the time of converting from word file to html my equations which are in the word document file was convert into image.
Globals.ThisAddIn.Application.ActiveDocument.Select();...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
| | |
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
|
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
| | |
