After several months of successful development in Visual Studio .NET on our
Windows 2003 Small Business Server, I now receve a message:
"Error while trying to run project: Unable to start debugging on the web
server. You do not have privileges to debug the web server process."
I can run from the IDE without debugging, but can't attach to the w3wp.exe
process. This also gives access denied.
I have read many messages where developers have this problem while remote
debugging but in my case, I'm on the server. I have tried many of the
suggestions including: DCOM changes, making sure I'm in the "Debugging Users"
group, I tried changing the App Pool to run as other users - no luck. Any
assistance would be appreciated.
6  1327 
You "MUST BE ADMIN" or set the SE_DEBUG privilege for the current user to
debug asp.net.
--
Daniel Fisher(lennybac on)
MCP ASP.NET C#
Blog: http://www.lennybacon.com/
"Bill Buss" <Bill Bu**@discussion s.microsoft.com> wrote in message
news:6C******** *************** ***********@mic rosoft.com... After several months of successful development in Visual Studio .NET on
our
Windows 2003 Small Business Server, I now receve a message:
"Error while trying to run project: Unable to start debugging on the web
server. You do not have privileges to debug the web server process."
I can run from the IDE without debugging, but can't attach to the w3wp.exe
process. This also gives access denied.
I have read many messages where developers have this problem while remote
debugging but in my case, I'm on the server. I have tried many of the
suggestions including: DCOM changes, making sure I'm in the "Debugging
Users"
group, I tried changing the App Pool to run as other users - no luck. Any
assistance would be appreciated.
Daniel, Thanks for the prompt reply. I have tried debugging as
"Administra tor" with no success. I have also added the users to the
"Debugger Users" group.
I'm getting close to trying a reinstall of Visual Studio. - Any thoughts?
installed the RemoteDebugger, tried as admin of the domain in group
"debugger users" and "wpg..." and still no success? Hmm, sorry
--
Daniel Fisher(lennybac on)
MCP ASP.NET C#
Blog: http://www.lennybacon.com/
"Bill Buss" <Bi******@discu ssions.microsof t.com> wrote in message
news:4A******** *************** ***********@mic rosoft.com... Daniel, Thanks for the prompt reply. I have tried debugging as
"Administra tor" with no success. I have also added the users to the
"Debugger Users" group.
I'm getting close to trying a reinstall of Visual Studio. - Any thoughts?
Tried uninstalling and resinstalling VS .NET - no help. Getting desperate!
"Daniel Fisher(lennybac on)" wrote: installed the RemoteDebugger, tried as admin of the domain in group
"debugger users" and "wpg..." and still no success? Hmm, sorry
--
Daniel Fisher(lennybac on)
MCP ASP.NET C#
Blog: http://www.lennybacon.com/
I am having the exactly the same problem, I have tried all kinds of solution
I can find on the internet, no luck. Did you find the solution? Thanks.
"Bill Buss" wrote: Tried uninstalling and resinstalling VS .NET - no help. Getting desperate!
"Daniel Fisher(lennybac on)" wrote:
installed the RemoteDebugger, tried as admin of the domain in group
"debugger users" and "wpg..." and still no success? Hmm, sorry
--
Daniel Fisher(lennybac on)
MCP ASP.NET C#
Blog: http://www.lennybacon.com/
I never reesolved this issue. Finally, rebuilt the server and re-installed
everything. Has worked since. I think it might have been caused by spyware
or adware.
Good luck...
"yuqlin" wrote: I am having the exactly the same problem, I have tried all kinds of solution
I can find on the internet, no luck. Did you find the solution? Thanks.
"Bill Buss" wrote:
Tried uninstalling and resinstalling VS .NET - no help. Getting desperate!
"Daniel Fisher(lennybac on)" wrote:
installed the RemoteDebugger, tried as admin of the domain in group
"debugger users" and "wpg..." and still no success? Hmm, sorry
--
Daniel Fisher(lennybac on)
MCP ASP.NET C#
Blog: http://www.lennybacon.com/ This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics | |
by: Tom wilson |
last post by:
I've been through everything with this error and cannot get the
debugger to work remotely. The only thing I can trace it down to is
that RPC is not communicating between servers.
So after many, many hours of searching I found the RPCPing utilitty.
We have 8 servers, 2 Exchange 2003 servers. RPCPing pings nothing
from anywhere on all protocols. I've tried on all severs in all
directions and from several different workstations. I...
|
by: Serdar Kalaycý |
last post by:
Hi everybody,
My problem seems a bit clichè but I could not work around.
Well I read lots of MSDN papers and discussions, but my problem is a bit
different from them. When I tried to run the project in debug mode (by
hitting F5) it gives an error message
"Error while trying to run project: Unable to start debugging on the web
server.
|
by: Tom wilson |
last post by:
I've been through everything with this error and cannot get the
debugger to work remotely. The only thing I can trace it down to is
that RPC is not communicating between servers.
So after many, many hours of searching I found the RPCPing utilitty.
We have 8 servers, 2 Exchange 2003 servers. RPCPing pings nothing
from anywhere on all protocols. I've tried on all severs in all
directions and from several different workstations. I...
|
by: Tom wilson |
last post by:
I've been through everything with this error and cannot get the
debugger to work remotely. The only thing I can trace it down to is
that RPC is not communicating between servers.
So after many, many hours of searching I found the RPCPing utilitty.
We have 8 servers, 2 Exchange 2003 servers. RPCPing pings nothing
from anywhere on all protocols. I've tried on all severs in all
directions and from several different workstations. I...
|
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look !
Part I. Meaning of...
| | |
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
|
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed.
This is as boiled down as I can make it.
Here is my compilation command:
g++-12 -std=c++20 -Wnarrowing bit_field.cpp
Here is the code in...
|
by: Hystou |
last post by:
Overview:
Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: conductexam |
last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one.
At the time of converting from word file to html my equations which are in the word document file was convert into image.
Globals.ThisAddIn.Application.ActiveDocument.Select();...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
| | |
by: adsilva |
last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
|
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
| |
