Unable to start debugging on the web server???

Hi,

I'm using VS .NET 2003 edition and I had built a web
project and I had been using it. But I changed a few
settings(why did I ever do that...:( )
Now I'm unable to run my Web application from VS .NET.
I get the error:

Error while trying to run project. Unable to start
debugging on the web server. The project is not
configured to be debugged.

When I do Debug- Debug without start:
I get the error:

Configuration Error
Description: An error occurred during the processing of a
configuration file required to service this request.
Please review the specific error details below and modify
your configuration file appropriately.

Parser Error Message: It is an error to use a section
registered as allowDefinition ='MachineToAppl ication'
beyond application level. This error can be caused by a
virtual directory not being configured as an application
in IIS.

Source Error:
Line 44: by Microsoft that offers a single
logon and core profile services for member sites.
Line 45: -->
Line 46: <authenticati on mode="Windows" />
Line 47:
Line 48: <!-- AUTHORIZATION
I tried the following:
1. I configured my Virtual Directory again.
2. I created a new web.config file
3. I enabled Integrated Windows Authnetication and
disabled Anonymous access.
4. I have administrator access to the machine.
5. I checked for the
6. I restarted IIS.

But nothing seems to be working..I stll get the same
error?

Please can anyone let me know what the problem is..?

Thanks,

Nov 18 '05 #1

Subscribe Reply

3830

Saravana [MVP]

Check out this faq,
http://www.extremeexperts.com/Net/FA...minASPNET.aspx

--
Saravana
Microsoft MVP - ASP.NET
www.extremeexperts.com

<an*******@disc ussions.microso ft.com> wrote in message
news:06******** *************** *****@phx.gbl.. .

Hi,

I'm using VS .NET 2003 edition and I had built a web
project and I had been using it. But I changed a few
settings(why did I ever do that...:( )
Now I'm unable to run my Web application from VS .NET.
I get the error:

Error while trying to run project. Unable to start
debugging on the web server. The project is not
configured to be debugged.

When I do Debug- Debug without start:
I get the error:

Configuration Error
Description: An error occurred during the processing of a
configuration file required to service this request.
Please review the specific error details below and modify
your configuration file appropriately.

Parser Error Message: It is an error to use a section
registered as allowDefinition ='MachineToAppl ication'
beyond application level. This error can be caused by a
virtual directory not being configured as an application
in IIS.

Source Error:
Line 44: by Microsoft that offers a single
logon and core profile services for member sites.
Line 45: -->
Line 46: <authenticati on mode="Windows" />
Line 47:
Line 48: <!-- AUTHORIZATION
I tried the following:
1. I configured my Virtual Directory again.
2. I created a new web.config file
3. I enabled Integrated Windows Authnetication and
disabled Anonymous access.
4. I have administrator access to the machine.
5. I checked for the
6. I restarted IIS.

But nothing seems to be working..I stll get the same
error?

Please can anyone let me know what the problem is..?

Thanks,

Nov 18 '05 #2

Ric Pullen

I've got similar problems but have no error message,

i'm trying to debug some customValidator code in javascript. I highlight
the breakpoint in the javascript, but it just jumps to the form declaration
when the web app is executed.

It did run at one point now it doesn't any ideas, i've tried all the
settings , cookies etc.

Example:

<script language = "javascript ">
function isValidUnitNo(s ource,arguments )
{var Allowed = 'UDud';
* if (Allowed.indexO f(arguments.Val ue.charAt(0)) == -1)
arguments.IsVal id = false
else arguments.IsVal id = true
}
</script>
</Head>
<Body etc......
* <Form id= "form1"

"Saravana [MVP]" <sa******@sct.c o.in.nospam> wrote in message
news:#t******** ******@tk2msftn gp13.phx.gbl...

Check out this faq,
http://www.extremeexperts.com/Net/FA...minASPNET.aspx

--
Saravana
Microsoft MVP - ASP.NET
www.extremeexperts.com

<an*******@disc ussions.microso ft.com> wrote in message
news:06******** *************** *****@phx.gbl.. .
Hi,

I'm using VS .NET 2003 edition and I had built a web
project and I had been using it. But I changed a few
settings(why did I ever do that...:( )
Now I'm unable to run my Web application from VS .NET.
I get the error:

Error while trying to run project. Unable to start
debugging on the web server. The project is not
configured to be debugged.

When I do Debug- Debug without start:
I get the error:

Configuration Error
Description: An error occurred during the processing of a
configuration file required to service this request.
Please review the specific error details below and modify
your configuration file appropriately.

Parser Error Message: It is an error to use a section
registered as allowDefinition ='MachineToAppl ication'
beyond application level. This error can be caused by a
virtual directory not being configured as an application
in IIS.

Source Error:
Line 44: by Microsoft that offers a single
logon and core profile services for member sites.
Line 45: -->
Line 46: <authenticati on mode="Windows" />
Line 47:
Line 48: <!-- AUTHORIZATION
I tried the following:
1. I configured my Virtual Directory again.
2. I created a new web.config file
3. I enabled Integrated Windows Authnetication and
disabled Anonymous access.
4. I have administrator access to the machine.
5. I checked for the
6. I restarted IIS.

But nothing seems to be working..I stll get the same
error?

Please can anyone let me know what the problem is..?

Thanks,

Nov 18 '05 #3

Similar topics

1753

unable to start debugging on server

by: Edelwater | last post by:

Hello, I have (possibly) a framework related problem Or VS specific : Error while trying to run the project: unable to start debugging on the server. could not start asp.net or atl debugging. Verify that ASP.NET or ATL Server is correctly installed on the Server. This occurs when i want to try to debug a project in Visual Studio. I

.NET Framework

4816

unable to dedug asp.net app - The project is not configured to be debugged.

by: TM | last post by:

When I run an ASP.Net application I am getting the following error: "Error while trying to run project: Unable to start debugging on the web server. The project is not configured to be debugged." I checked and made sure the Machine Debug Manager is running on the server, made sure the web.comfit file has debug=true. Mine is: <compilation defaultLanguage="vb" debug="true" /> I also checked the directory executions permissions and it...

ASP.NET

2760

Error while trying to run project: Unable to start debugging on the web server. The project is not configured to be debugged. windows 2003 server

by: Claude seraphin | last post by:

I'am having this message while trying to rune my asp.net app on win3k server. I have set debug="true" in <compilation section in my web.config . Can anyone help me? Thanks in advance

ASP.NET

4221

Unable to start debugging

by: Serdar Kalaycý | last post by:

Hi everybody, My problem seems a bit clichè but I could not work around. Well I read lots of MSDN papers and discussions, but my problem is a bit different from them. When I tried to run the project in debug mode (by hitting F5) it gives an error message "Error while trying to run project: Unable to start debugging on the web server.

ASP.NET

6580

error message: Unable to start debugging on the web server"

by: Bruce Schechter | last post by:

I just started to develop an ASP.NET application in vs.net 2003 . But each time I try to execute the application (which is basically empty so far), I get a dialog box titled "Microsoft Development Environment" with this message: "Error while trying to run project: Unable to start debugging on the web server. Server-side error occurred on sending debug HTTP request. Make sure the server is operating correctly. Verify there are no...

ASP.NET

2400

Unable to start debugging on the web server After 2003 SP1

by: Báltico | last post by:

After installing Windows 2003 Server SP1 I was unable to start any asp.net project either in Debug or Release mode. Every time I got the Unable to start debugging on the web server ... You do not have permission to debug the server ... Verify that you are an administrator or a member of "Debugger users" group I can no longer reproduce the error because I uninstalled SP1. After uninstalling it, everything was solved, so I am sure that SP1...

ASP.NET

2365

Unable to start debugging on the web server; VS.net 2002 on XP Pro

by: =?Utf-8?B?SmVmZnJleQ==?= | last post by:

Just started to test a VB.net 2002 project for ASP.net application. After successfully installed the VS.net 2002 and tested the IIS 5.1 on XP Pro SP2 for some classical ASP programs, I am starting to build ASP.net programs now. For a new ASP.net project, an error message (i.e Unable to start debugging on the web server) popped out. I disabled the ASP.net debugging for 3-4 projects. However, I either could not see the ASP.net...

ASP.NET

1297

Unable to start debugging on the web server

by: Sreenath Rao Nellutla | last post by:

Hi, All I developed applications named WebApplication2, WebApplication3, WebApplication4 and WebApplication5 on one system. When I wanted to test the applications on the other system Im getting the problem as "Error while trying to run the project: Unable to start debugging on the web server.Server side errorr occured on sending debug HTTP request. Make sure the server is operating correctly. Verify there are no syntax errors in...

.NET Framework

7624

unable to start debugging on the web server

by: ian | last post by:

A few weeks ago I was able to run remote debugging from my local machine (VS 2005 XP sp2) but now I get the following message: unable to start debugging on the web server. logon failure: unknown user name or bad password I logged on to a neighbors computer and I can debug from his so the server should be OK right? The web server is running Server 2003 sp1. I even tried disabling the loopback check in the registry...

ASP.NET

3155

Unable to start TSQL Debugging. Could not attach to SQL Server Process on 'srvname'. The RPC server is unavailable.

by: DR | last post by:

Unable to start TSQL Debugging. Could not attach to SQL Server Process on 'srvname'. The RPC server is unavailable. I get this error when I try to run a SQL Server Project with a CLR stored Procedure in it. The target DB is SQL Server 2005 and im using VS 2005. I simply create a new SQL Server Project which creates a Test.sql, i then simply added a Stored Procedure to it called the default name StoredProcedure1.cs and put a break point...

.NET Framework

9563

What is ONU?

by: marktang | last post by:

ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look ! Part I. Meaning of...

General

9386

Changing the language in Windows 10

by: Hystou | last post by:

Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it. First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...

Windows Server

10144

Problem With Comparison Operator <=> in G++

by: Oralloy | last post by:

Hello folks, I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>". The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed. This is as boiled down as I can make it. Here is my compilation command: g++-12 -std=c++20 -Wnarrowing bit_field.cpp Here is the code in...

C / C++

9997

Maximizing Business Potential: The Nexus of Website Design and Digital Marketing

by: jinu1996 | last post by:

In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth. The Art of Business Website Design Your website is...

Online Marketing

9937

The easy way to turn off automatic updates for Windows 10/11

by: Hystou | last post by:

Overview: Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...

Windows Server

9822

Discussion: How does Zigbee compare with other wireless protocols in smart home applications?

by: tracyyun | last post by:

Dear forum friends, With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...

General

6642

Couldn’t get equations in html when convert word .docx file to html file in C#.

by: conductexam | last post by:

I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one. At the time of converting from word file to html my equations which are in the word document file was convert into image. Globals.ThisAddIn.Application.ActiveDocument.Select();...

C# / C Sharp

3917

transfer the data from one system to another through ip address

by: 6302768590 | last post by:

Hai team i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system

C# / C Sharp

3522

How to add payments to a PHP MySQL app.

by: muto222 | last post by:

How can i add a mobile payment intergratation into php mysql website.

PHP