Hi,
I have noticed that I can only see the output of
"system.diagnos tics.trace.writ e(..)" in the output window of the dubugger.
which leaves me wondering, if these statements are left in the code in a
release build, then where exactly can I see their output.
Is it possible to write then directly to a file rather than the output
window of the debugger.
I am under the impression that objects of the system.diagnost ics.trace class
are left in the code when a release build is done where as objects of the
class system.diagnost ics.debug are removed from a release build. Am I
correct in this view??
cheers
Alex.
4  5218 
"Alex" <al************ **@yahoo.com> wrote in message
news:u3******** ******@TK2MSFTN GP12.phx.gbl... Hi,
I have noticed that I can only see the output of
"system.diagnos tics.trace.writ e(..)" in the output window of the dubugger.
which leaves me wondering, if these statements are left in the code in a
release build, then where exactly can I see their output.
Is it possible to write then directly to a file rather than the output
window of the debugger.
I am under the impression that objects of the system.diagnost ics.trace
class are left in the code when a release build is done where as objects of the
class system.diagnost ics.debug are removed from a release build. Am I
correct in this view??
Look up the System.Diagnost ics.TraceListen er class in the documentation.
--
John Saunders
Internet Engineer jo***********@s urfcontrol.com
"Alex" <al************ **@yahoo.com> wrote in message
news:u3******** ******@TK2MSFTN GP12.phx.gbl... Hi,
I have noticed that I can only see the output of
"system.diagnos tics.trace.writ e(..)" in the output window of the dubugger.
which leaves me wondering, if these statements are left in the code in a
release build, then where exactly can I see their output.
Is it possible to write then directly to a file rather than the output
window of the debugger.
I am under the impression that objects of the system.diagnost ics.trace
class are left in the code when a release build is done where as objects of the
class system.diagnost ics.debug are removed from a release build. Am I
correct in this view??
Look up the System.Diagnost ics.TraceListen er class in the documentation.
--
John Saunders
Internet Engineer jo***********@s urfcontrol.com
cheers john.
alex.
"John Saunders" <john.saunder s at surfcontrol.com > wrote in message
news:O5******** ******@TK2MSFTN GP09.phx.gbl... "Alex" <al************ **@yahoo.com> wrote in message
news:u3******** ******@TK2MSFTN GP12.phx.gbl... Hi,
I have noticed that I can only see the output of
"system.diagnos tics.trace.writ e(..)" in the output window of the
dubugger. which leaves me wondering, if these statements are left in the code in a
release build, then where exactly can I see their output.
Is it possible to write then directly to a file rather than the output
window of the debugger.
I am under the impression that objects of the system.diagnost ics.trace
class are left in the code when a release build is done where as objects of
the class system.diagnost ics.debug are removed from a release build. Am I
correct in this view??
Look up the System.Diagnost ics.TraceListen er class in the documentation.
--
John Saunders
Internet Engineer
jo***********@s urfcontrol.com
cheers john.
alex.
"John Saunders" <john.saunder s at surfcontrol.com > wrote in message
news:O5******** ******@TK2MSFTN GP09.phx.gbl... "Alex" <al************ **@yahoo.com> wrote in message
news:u3******** ******@TK2MSFTN GP12.phx.gbl... Hi,
I have noticed that I can only see the output of
"system.diagnos tics.trace.writ e(..)" in the output window of the
dubugger. which leaves me wondering, if these statements are left in the code in a
release build, then where exactly can I see their output.
Is it possible to write then directly to a file rather than the output
window of the debugger.
I am under the impression that objects of the system.diagnost ics.trace
class are left in the code when a release build is done where as objects of
the class system.diagnost ics.debug are removed from a release build. Am I
correct in this view??
Look up the System.Diagnost ics.TraceListen er class in the documentation.
--
John Saunders
Internet Engineer
jo***********@s urfcontrol.com
This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics | |
by: Raj Dhrolia |
last post by:
Hi,
In one of my method, I want to know the class/function that
called/invoked this method.
i.e. i have a function named Method1() in class1. I want
"ClassX.MethodX()" in Method1(), when MethodX() of ClassX invokes Method1()
function
I think System.Reflection might provide some help.
Regards.
|
by: Alex |
last post by:
Hi,
I have noticed that I can only see the output of
"system.diagnostics.trace.write(..)" in the output window of the dubugger.
which leaves me wondering, if these statements are left in the code in a
release build, then where exactly can I see their output.
Is it possible to write then directly to a file rather than the output
window of the debugger.
I am under the impression that objects of the system.diagnostics.trace class
|
by: A.M |
last post by:
Hi,
If I use System.Diagnostics.Debug.WriteLine in a asp.net application, where
does the output go?
Is there any trace monitor application thar shows me the trace output?
Thanks,
Allan
|
by: Jiho Han |
last post by:
I am wondering whether asp.net applications can write trace information
using the System.Diagnostics.Trace class, and also whether in web.config,
the <system.diagnostics> element and its sub elements have effect.
Trace.axd is good but not perfect. I would like to use a separate file for
writing trace information in addition to Trace.axd.
Also, what happens when you call Trace.Close which has a set of listeners
including a text file...
|
by: Jiho Han |
last post by:
I have the following defined in web.config under <configuration> node:
<system.diagnostics>
<switches>
<add name="MainSwitch" value="4"/>
</switches>
| | |
by: Patrick |
last post by:
When Tracing in ASP.NET, the IIS process (on IIs5.1) is locking on the Trace
file, and I can't read the trace file without restarting the IIS:
Even the following does NOT work (how could I fix this??):
System.Diagnostics.Trace.WriteLine(System.DateTime.Now.ToLongTimeString()+
"--" + dirException.ToString());
System.Diagnostics.Trace.Flush();
((System.Diagnostics.TraceListener)
System.Diagnostics.Trace.Listeners).Close();
|
by: Oleg Ogurok |
last post by:
Hi there,
My ASP.NET 2.0 app uses an external assembly that calls methods like
Trace.Write() and Trace.TraceError() of namespace System.Diagnostics.
I need to enable tracing in my web app so that I could see the trace
messages from the component.
Here's what I've added to web.config so far:
<system.web>
|
by: msnews.microsoft.com |
last post by:
Hi,
I am tring to use Trace Listener in asp.net 1.1 application as mentoned
here. But i am getting the following error,
Configuration Error
Description: An error occurred during the processing of a configuration file
required to service this request. Please review the specific error details
below and modify your configuration file appropriately.
Parser Error Message: Exception in configuration section handler.
|
by: =?Utf-8?B?QWxleA==?= |
last post by:
Hi.
Does anybody know if System.Diagnostics.TraceSource is supported under
ASP.NET? I've used this class along with SourceSwitch and
TextWriterTraceListener in Windows apps but this is the first time I attempt
it in a web app. Specifically, does anyone know why the code below works in a
Windows application but not under an ASP.NET application?
What's interesting (frustrating I should say, since I don't understand the
behavior) is that...
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
|
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed.
This is as boiled down as I can make it.
Here is my compilation command:
g++-12 -std=c++20 -Wnarrowing bit_field.cpp
Here is the code in...
| | |
by: Hystou |
last post by:
Overview:
Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: conductexam |
last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one.
At the time of converting from word file to html my equations which are in the word document file was convert into image.
Globals.ThisAddIn.Application.ActiveDocument.Select();...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
|
by: adsilva |
last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
| | |
by: bsmnconsultancy |
last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...
| |
