473,657 Members | 2,415 Online
Bytes | Software Development & Data Engineering Community
+ Post

Home Posts Topics Members FAQ

Error 8004020f when using CDOSYS

I have a client with a site that users can register at, we collect their
emails, if they have one, in an Access db. I have a page that uses CDOSYS to
send messages to those emails but I am getting "error '8004020f" when I do
this. About 75% of the members have emails so some email fields in the db
are empty. One issue with my webhost is that I cannot send by CDOSYS more
than 99 emails at a time, so I select all emails where the ID is less than
97, that is about 85 emails total. After the first group goes out the page
redirects to another page so the next group can go out.

Here is how I select the emails: rs.open "select MemberEmail from membership
where MemberEmail <'""' AND ID <= 97",aqe,3,3

As a test I copied the member database, replaced all the member email
addresses with 3 different email addresses that I have and the form works
fine. I get a copy of the message for every member who I gave one of my
email addresses to. However, when I use the members real addresses I get the
'8004020f' error. I found a place on the web that said that error means,
among other things, an invalid email address. I have looked at the db and
there were a couple bad addresses. One person had .net instead of .com for
their ISP and one person was at abc@gmail. They had left off the .com part,
I fixed those but it still hangs.

It looks to me like the SMTP server is somehow validating the emails before
sending them off, and if the email is not valid it crashes instead of just
skipping over it. When I use my 3 good email addresses it works fine but not
with the member's addresses. Any ideas on how to fix this?
Jul 14 '07 #1
0 3451

This thread has been closed and replies have been disabled. Please start a new discussion.

Similar topics

4
40910
by: alex | last post by:
Hi, Does anybody have an idea why is this happening. The following code works great on my development machine (windows 2000 pro), but on the test server (Windows 2000 Server) it can only send emails to addresses on our domain. If I specify other address I just get a 8004020f error message. The smtp server I'm trying to send is on a separate machine (Windows NT Server). I think it has something to do with web server configuration, or even...
5
3259
by: Paco | last post by:
I'm having a problem with an ASP page I've made and was hoping someone out there can help. My page sends an email using CDO to a username pulled from a database as follows: With cdoMessage Set .Configuration = cdoConfig .From = "Admin <admin@MyCompany.com>" .To = rs("USERName") & "@MyCompany.com"
6
15578
by: Owen | last post by:
Hi, can somebody help me please... I'm trying to set up a very simple asp page that sends me an email when it runs. This is just to try and get CDOSYS working so I can send out emails from my website. Everything is fine right up until I execute the ".Send" method. What could be wrong? What does the error mean? The output from the source below is: "test1 error '8004020f'
1
4498
by: Luis andyza | last post by:
I use CDO.Message to send e-mail from an asp page (similar to the method at http://www.aspfaq.com/show.asp?id=2305). One of my testers entered an invalid e-mail address and got an 8004020F error. Is there a way to trap this error so that I can display a better error message to the user and prevent the page from crashing?
0
1512
by: gariboldo | last post by:
Have all a nice day, I have the following problem: I have in my site a page ASP that contains a form and i'm trying to send it to an email address with the following script: Set cdoConfig = CreateObject("CDO.Configuration") With cdoConfig.Fields .Item(cdoSendUsingMethod) = cdoSendUsingPort .Item(cdoSMTPServer) = "mail.server"
2
2446
by: dmalhotr2001 | last post by:
Hi, I'm using windows 2003 with asp. However I'm having problems sending email using the cdosys object. My code is below and I don't believe its the code but on the send command. <% dim sch
2
6545
by: Mario Michela | last post by:
i've been working for 4 days trying to accomplish something that should take 20 minutes.. I have an asp page that take user info, ie name, address phone, email. it sends a copy to email addres A and sends a reciept to site visitor. i have it working on 1 SBS 2003, but i get Error 8004020f on a second client's machine.. i'm using cdo, sendusing = 2 (smtp via network). i've tried both using and not using authentication w/ username and...
1
1274
by: jademoon | last post by:
I am having problems since we built a new Exchange Server 2003 (member server) and removed the Exchange 2000 (member server) from out network. The error comes about when an MCMS Author "submits" a web page. Using the MCMS Workflow, this hooks into smtp and delivers mail to the editors. Since the changeover in exchange servers this functionability no longer works. Environment: First Server: MCMS 2002 Server Enterpise SP1a
7
5610
by: ayush patel | last post by:
Hi everyone, I am writing ASP code to send email using SMTP.I am getting error '8004020f' at .Send. this seems to be a common error. my SMTP server relays to anonymous email addresses.there is no firewall or proxy set up that can stop these mails to be sent. Infact i have seen the SMTP LOG FILE and (i dont know exactly what it says)i think it is sending the mail.see below this is my SMTP LOG FILE.
0
8842
Oralloy
by: Oralloy | last post by:
Hello folks, I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>". The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed. This is as boiled down as I can make it. Here is my compilation command: g++-12 -std=c++20 -Wnarrowing bit_field.cpp Here is the code in...
0
8740
jinu1996
by: jinu1996 | last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth. The Art of Business Website Design Your website is...
0
8617
tracyyun
by: tracyyun | last post by:
Dear forum friends, With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
1
6176
isladogs
by: isladogs | last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM). In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules. He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms. Adolph will...
0
5642
by: conductexam | last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one. At the time of converting from word file to html my equations which are in the word document file was convert into image. Globals.ThisAddIn.Application.ActiveDocument.Select();...
0
4173
by: TSSRALBI | last post by:
Hello I'm a network technician in training and I need your help. I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs. The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols. I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
0
4330
by: adsilva | last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
1
2742
by: 6302768590 | last post by:
Hai team i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
2
1970
muto222
by: muto222 | last post by:
How can i add a mobile payment intergratation into php mysql website.

By using Bytes.com and it's services, you agree to our Privacy Policy and Terms of Use.

To disable or enable advertisements and analytics tracking please visit the manage ads & tracking page.