am currently working on a project which the main application we
intended to use has fell through, so we have falled back on Access to
work through this.
The information we have imported into a single table contains
information from the spreadsheet with the following details:
Vendor Number
Vendor Name
Amount spent
Number of Invoices Raised
Type of Spend (Simply Influenceable or Non)
Contracted Spend (Simply Yes or No)
And finally an industry classification with regards to what goods/
services a vendor supplies in the following fields:
Key Number
Code Number
Code Description
Level
The aim is to generate reports to group these vendors together by the
classification so that we can see how much in total was spent for one
classification, eg stationary, for both Contracted and Non Contracted
spend.
I attempted this briefly through the Reports Wizard and it didn't
output in a useful format, instead giving 200+ single pages, rather
than a list and total which I need.
What would be the best way of approaching this?
Any advice will be gratefully welcomed.
Thanks, 1 1560
On Thu, 20 Dec 2007 00:45:55 -0800 (PST), si********@goog lemail.com
wrote:
Sounds like you need a crosstab query. There is a query wizard for it.
-Tom.
am currently working on a project which the main application we intended to use has fell through, so we have falled back on Access to work through this.
The information we have imported into a single table contains information from the spreadsheet with the following details:
Vendor Number Vendor Name Amount spent Number of Invoices Raised Type of Spend (Simply Influenceable or Non) Contracted Spend (Simply Yes or No)
And finally an industry classification with regards to what goods/ services a vendor supplies in the following fields:
Key Number Code Number Code Description Level
The aim is to generate reports to group these vendors together by the classificati on so that we can see how much in total was spent for one classification , eg stationary, for both Contracted and Non Contracted spend.
I attempted this briefly through the Reports Wizard and it didn't output in a useful format, instead giving 200+ single pages, rather than a list and total which I need.
What would be the best way of approaching this?
Any advice will be gratefully welcomed.
Thanks,
This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics |
by: Justin Lebar |
last post by:
Sorry about the huge post, but I think this is the amount of
information necessary for someone to help me with a good answer.
I'm writing a statistical analysis program in ASP.net and MSSQL7 that
analyzes data that I've collected from my business's webpage and the
hits it's collecting from the various pay-per-click (PPC) engines.
I've arrived at problems writing a SQL call to generate certain
statistics.
Whenever someone enters our...
|
by: Ryan |
last post by:
We have an MIS system which has approx 100 reports. Each of these
reports can take up to several minutes to run due to the complexity of
the queries (hundreds of lines each in most cases). Each report can be
run by many users, so in effect we have a slow system.
I want to seperate the complex part of the queries into a process that
is generated each night. Then the reports will only have to query
pre-formatted data with minimal...
|
by: sherkozmo |
last post by:
SQL2000 - AccessXP
I built an adp file with a stored procedure from SQL as follows:
SELECT * FROM
Z_mis_sjk_job_code_access
WHERE job_code=@JobCode
UNION ALL
SELECT * FROM
Z_mis_sjk_job_code_access_mkey
WHERE job_code=@JobCode
ORDER BY app_only, submenu_number, menu_routine_number,
|
by: Louis LeBlanc |
last post by:
Hey folks. I'm new to the list, and not quite what you'd call a DB
Guru, so please be patient with me. I'm afraid the lead up here is a
bit verbose . . .
I am working on an application that uses very high volume DB
transactions - in the order of tens of millions per day . . .
Anyway, the current database which will remain nameless, but begins
with O and rymes with debacle (sorta), has a problem with high volume
work when it comes to...
|
by: ARC |
last post by:
Just curious if anyone is having issues with Acc 2007 once the number of
objects and complexity increases? I have a fairly large app, with many
linked tables, 100's of forms, queries, reports, and lots of vba code. I'm
nearly finished with re-doing my app in access 2007, and just imported an
add-in program, which has added even more forms, queries and linked tables.
Every so often now, after opening many different screens, I'll...
| |
by: Aswanth |
last post by:
I'm Generating Reports in SSRS-2005..
Previously I got the Data from One Database & Generated Reports.. Now I used to get the Data from Two Different Databases(ie Database-1 & Database-2) & to generate the Reports..
I'm having one Stored Procedure(Get_Data) which will combine Two databases & get the data from them.. It is working fine for Me..(I tested in Sql Server Management Studio)..
But it is Not working fine in my Visual Studio.. ...
|
by: Aswanth |
last post by:
I'm Working with Asp.Net with C#.. & I'm Generating Reports in SSRS-2005..
Till Now I'm Generating Reports in SSRS-2005 with Stored Procedure.. in Which I'm Generating Reports for One Particular User Details(ie I wrote Stored Procedure for Getting One Users Details)..
Now I Want to Generate the Reports for Different Users DYNAMICALLY (Here, I wrote another Stored Procedure which contains UsersID's as Input...
|
by: laziers |
last post by:
Hi,
What kind of data access you will use for the project with very large
database :
1. NHibernate
2. Linq
3. Sql queries + stored procedures
4. DataSets
|
by: MC |
last post by:
I'm developing an application that needs a large (up to 4 GB) amount of temporary file space on a local (not network-attached) disk. What are some good tactics to use in a C# program to make sure the swap space is suitable? There can be some interaction with the user to choose the swap file location, but the more the program can find out about it, the better.
|
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look !
Part I. Meaning of...
|
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed.
This is as boiled down as I can make it.
Here is my compilation command:
g++-12 -std=c++20 -Wnarrowing bit_field.cpp
Here is the code in...
| |
by: Hystou |
last post by:
Overview:
Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
|
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
|
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
|
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
| |
by: bsmnconsultancy |
last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...
| |