473,807 Members | 2,766 Online
Bytes | Software Development & Data Engineering Community
+ Post

Home Posts Topics Members FAQ

Biopotential Biofeedback Data Acquisition

Biopotential Biofeedback Data Acquisition
DataQ Data Acquisition Custom Software
1 to 32 channels (AuroScroll 4ch/time)
35+ DataQ Devices supported
Record / Playback Functions
0-15 Plot bits + Analog
Adjustable Trigger Modes
Adj. Sample Rate, Gain And Zoom
Plus Much More !
Custom Developed Versions
Custom chart Labels and functions
Paypal Accepted, Download link
http://binaural.info/dataq/dataq.htm
Visit DataQ Home site
www.dataq.com
Or there support forum
http://support.dataq.com/

In case anyone's interested in measuring biopotentials, I was able to
get the DI194RS sensitivity down in the MV range runing a 3 bit plot
offset with the below application, see jpg and or web site. The waves
graphed (2nd part of charts), are from touching the solder joints on
the DI194RS below the screw terminals (Body noise (60 HZ)), moving my
finger aounrd to different channels, no noise was present when not
touching anything (Good common mode rejection). and there was no
channel isolation problems, See app at : <http://binaural.info/dataq/
dataq.htm>
Keywords : biofeedback chart recoder eeg ekg ecg biopotentials
Acquisition
data software computer grass amplifier

Apr 11 '07 #1
0 1198

This thread has been closed and replies have been disabled. Please start a new discussion.

Similar topics

3
2166
by: StepH | last post by:
Hi, I'm building a little application, which the goal is to: 1./ Collect data via Serial line and or via a file (for playback). 2./ Display these data as graph, oscilloscope, ... How manage this ? 1./ Is each "display" must responsible to acquire/read the data ?
2
1566
by: Johann Blake | last post by:
If you are, I'd be interested in knowing what kinds of applications you are working on and the problems, if any, you are confronting. Best Regards, Johann Blake CloserWorlds Mobile Solutions www.closerworlds.com
1
2140
by: Ryan Melville | last post by:
Hi, I need to use WIA (Windows Image Acquisition) from managed C++. Is there a "new and improved" way to access WIA from managed C++ (i.e., through .net)? Or, is it the same COM calls as from unmanaged C++? If it's the same COM calls, is there a "new and improved" way to access COM through managed C++? Or, do I do the same CComPtr magic as with unmanaged C++? Or, can I not use ATL facilities from managed C++ and I would have to...
7
2253
by: jude | last post by:
Hello, We are starting to discuss a new ASP.NET application that will be a data acquisition display application. The data to be displayed will come from multiple sources--database tables, serial and Ethernet PLCs, OPC servers, etc. The application will need to display graphic gauges and charts, in addition to the actual values retrieved from the various data sources. The application will need to continually update itself in a real-time...
11
1955
by: mwt | last post by:
Hi. I'm reworking a little app I wrote, in order to separate the data from the UI. As a start, I wanted to create a iron-clad data recepticle that will hold all the important values, and stand up to being queried by various sources, perhaps concurrently. In all likelihood, the app will never need anything that robust, but I want to learn to write it anyway, as an exercise. So here is my code. It's really simple, and I'm sure you can see my...
9
1844
by: David Harris | last post by:
Ok, so I'm semi-new to .NET, having done everything manually with SQL code back in VB6. So before I program this up completely manually again, I thought I'd ask for better ways to think through this problem. We have several client machines, and a central data warehousing server. Each machine may contain hundreds of surveys, and they all are sent to the central server. Only they can never be networked together, forcing us to use files. I...
3
5720
by: Roberto Hernández | last post by:
I try to use the Windows Image Acquisition (WIA) with a sample in vb.net but it takes only back photos and also at low resolution. How can I put ther resolution at 640x480? I have a Labtec webcam plus that works fine with other software. I downloaded two samples from the internte and both of them do the same problem The samples are: http://www.vbforums.com/showthread.php?t=378126 http://www.vbforums.com/attachment.php?attachmentid=44367...
0
913
by: Scott | last post by:
Biopotential Biofeedback Data Acquisition DataQ Data Acquisition Custom Software 1 to 32 channels (AuroScroll 4ch/time) 35+ DataQ Devices supported Record / Playback Functions 0-15 Plot bits + Analog Adjustable Trigger Modes Adj. Sample Rate, Gain And Zoom Plus Much More ! Custom Developed Versions
36
2365
by: Ulysses | last post by:
Could someone tell me how to go about getting data from a data acquisition card using C?...<Just general information would also help........I'm just working on an idea at the moment>.
0
9719
marktang
by: marktang | last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look ! Part I. Meaning of...
0
9599
by: Hystou | last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it. First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
0
10624
Oralloy
by: Oralloy | last post by:
Hello folks, I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>". The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed. This is as boiled down as I can make it. Here is my compilation command: g++-12 -std=c++20 -Wnarrowing bit_field.cpp Here is the code in...
1
10374
by: Hystou | last post by:
Overview: Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
0
9193
agi2029
by: agi2029 | last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own.... Now, this would greatly impact the work of software developers. The idea...
0
6877
by: conductexam | last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one. At the time of converting from word file to html my equations which are in the word document file was convert into image. Globals.ThisAddIn.Application.ActiveDocument.Select();...
0
5684
by: adsilva | last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
1
4330
by: 6302768590 | last post by:
Hai team i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
2
3853
muto222
by: muto222 | last post by:
How can i add a mobile payment intergratation into php mysql website.

By using Bytes.com and it's services, you agree to our Privacy Policy and Terms of Use.

To disable or enable advertisements and analytics tracking please visit the manage ads & tracking page.