Access2k
I WAS getting the following error when using the MID function:
Run Time Error '13' Type Mismatch
I have a new single form, unbound with 1-button on it that uses the
following code:
Private Sub Command0_Click( )
MsgBox MID("ABCDEFG", 1, 1)
End Sub
This Worked FINE!
However, Once I introduce a Table to the Forms RecordSource, I get the
error mentioned.
It turned out that I had a Field named MID for middle initial.
Any suggested conventions for avoiding this???
Greg
1  3070 
On 18 Jan 2007 14:21:18 -0800, Ap******@gmail. com wrote:
Access2k
I WAS getting the following error when using the MID function:
Run Time Error '13' Type Mismatch
I have a new single form, unbound with 1-button on it that uses the
following code:
Private Sub Command0_Click( )
MsgBox MID("ABCDEFG", 1, 1)
End Sub
This Worked FINE!
However, Once I introduce a Table to the Forms RecordSource, I get the
error mentioned.
It turned out that I had a Field named MID for middle initial.
Any suggested conventions for avoiding this???
Greg
It's always best that you not use function names as well as Access
object properties, such as Height, Width, Name, etc. so that you
don't confuse Access.
It's best that you change the field name, perhaps to "txtMid"
Here are more words that should not be used as field names.
See the Microsoft KnowledgeBase article
for your version of Access:
109312 'Reserved Words in Microsoft Access' for Access 97
209187 'ACC2000: Reserved Words in Microsoft Access'
286335 'ACC2002: Reserved Words in Microsoft Access'
321266 'ACC2002: Microsoft Jet 4.0 Reserved Words'
--
Fred
Please respond only to this newsgroup.
I do not reply to personal e-mail This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics | |
by: mychevworld |
last post by:
I'm getting a type mismatch error on the mid(strRecord,1,1)="H" line. I
used to do this all of the time, but I haven't done any VBScript for
awhile, so I'm sure I'm forgetting something.
While not objResults.EOF
strRecord=String( 333 ,32 )
IF TicketID<>objResults.Fields("ticket").Value then
Mid(strRecord,1,1)="H"
mid(strRecord,2,5)=objResults.Fields("cust").Value 'cust
mid(strRecord,7,30)=objResults.Fields("ship1").Value 'ship1
|
by: Martin Lacoste |
last post by:
Is there some issue with using too many left/right/mid/len functions
in queries? Depending on the usage, they work fine, but... then
there's here:
SELECT Master_CAO.Incipit, Master_CAO.FullText, Len() AS
, Left(!,Len()) AS
FROM Master_CAO
WHERE (((Left(,Len()))<>));
|
by: Andrew Proctor |
last post by:
Hello
This is not a big problem, but I was hoping someone a bit more
knowlegable than I could explain something to me.
I have a simple function behind a form which writes changed values to
a table for tracking purposes :
Public Sub RecordChanges()
Dim strInsertValue As String
strInsertValue = "INSERT INTO
|
by: martlaco1 |
last post by:
Trying to fix a query that (I thought) had worked once upon a time, and
I keep getting a Data Type Mismatch error whenever I enter any criteria
for an expression using a Mid function. Without the criteria, the Mid
function returns the values when I run the query. So if one of the
values is a "t" (no quotes), can I not ask to isolate that record by
putting "t" as a criteria? Nope - error, error.
If I put it within the expression itself...
|
by: geoffrobinson |
last post by:
Hi,
I'm serializing an object using XmlSerializer. It is serializing, but
we are getting errors upon deserialization.
We use the following code to serialize:
FileStream fs = new FileStream(NavCmdFile, FileMode.Create,
FileAccess.Write, FileShare.None);
XmlSerializer xmlFmt = new XmlSerializer(someObject.GetType());
| | |
by: Davros9 |
last post by:
Trying to get Regular Expressions working.......
----------------
Public Function SepString(InField As String) As String
''seperates on space and comma
Dim RE As New RegExp
Dim Matches As Match
RE.IgnoreCase = True
|
by: fd1 |
last post by:
Hi All,
I'm getting Data Type Mismatch error when I run the following query:
SELECT tbl1.Definition, tbl2.Group
FROM tbl1, tbl2
WHERE ((Mid$(!,6)=Mid$(!,9)));
Both "Definition" and "Description" are of type text.
|
by: dstorms |
last post by:
Hi,
I'm trying to create a button on a form that:
1. Takes the ComputerID from the form linked to Table 1,
2. Checks Table 2 for a matching ComputerID, and
3. Opens the query qryEditData, and
4. If no match can be found, adds a new record in Table 2 and enters the ComputerID automatcially.
The goal is to create a new record in Table 2 when a new record is created in table 1 and have the ComputerID fields match with a 1-to-1...
|
by: bxscikid |
last post by:
I am using VB 6 in order to clear a listbox (lststuff) containing material entered by the user via input boxes. I am trying to utilize a command button which will clear the list for the user. When testing the program, as soon as i click on the command button I receive a "Type mismatch" error. How can I solve this?
This is the code I am using:
Private Sub cmdclear_Click(Index As Integer)
Dim warning As String
warning =...
|
by: DonRayner |
last post by:
This one has me stumped. I'm getting a "Type Mismatch" error on one of my forms when it's being opened. It's hapening before the forms "On Open" event, I stuck a msgbox in there to check and I'm getting the error before it opens.
The line of code that calls the form from another form is.
DoCmd.OpenForm "NonConformanceAdd",,,,acFormAdd,acDialog
I get the error, click ok, then the form opens and works exactly how it's supposed to. I even...
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
| | |
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: conductexam |
last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one.
At the time of converting from word file to html my equations which are in the word document file was convert into image.
Globals.ThisAddIn.Application.ActiveDocument.Select();...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
|
by: adsilva |
last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
|
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
| | |
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
|
by: bsmnconsultancy |
last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...
| |
