Where do you add a Sub-Report? To the detail Section?
Thanks
DS 5 1468
"DS" <bo******@opton line.net> wrote in message
news:yV******** *****@fe08.lga. .. Where do you add a Sub-Report? To the detail Section? Thanks DS
Most often that's where they belong, but they could go anywhere. Sticking
to the polite locations to place them, suppose the main report was based on
Contacts and the sub-report was based on a related table ContactNotes, then
the detail section shows for each contact, and so if the subreport was here,
you'd see the related notes for each contact.
If however, you subreport showed a breakdown summary of your contacts table,
eg number of contacts per sales territory, then you could have this in a
report header, so you see an overall summary of the contacts followed by a
section for each contact.
Eric Schittlipz wrote: "DS" <bo******@opton line.net> wrote in message news:yV******** *****@fe08.lga. ..
Where do you add a Sub-Report? To the detail Section? Thanks DS
Most often that's where they belong, but they could go anywhere. Sticking to the polite locations to place them, suppose the main report was based on Contacts and the sub-report was based on a related table ContactNotes, then the detail section shows for each contact, and so if the subreport was here, you'd see the related notes for each contact. If however, you subreport showed a breakdown summary of your contacts table, eg number of contacts per sales territory, then you could have this in a report header, so you see an overall summary of the contacts followed by a section for each contact.
Its not really a Sub Report. I tried putting it in details and got a
mess. I need it to be in its own section. I guess I'm trying to print
4 reports one after the other on the same report. Any ideas? Thanks.
DS
"DS" <bo******@opton line.net> wrote in message
news:Jh******** *****@fe08.lga. .. Eric Schittlipz wrote: "DS" <bo******@opton line.net> wrote in message news:yV******** *****@fe08.lga. ..
Where do you add a Sub-Report? To the detail Section? Thanks DS
Most often that's where they belong, but they could go anywhere. Sticking to the polite locations to place them, suppose the main report was based on Contacts and the sub-report was based on a related table ContactNotes, then the detail section shows for each contact, and so if the subreport was here, you'd see the related notes for each contact. If however, you subreport showed a breakdown summary of your contacts table, eg number of contacts per sales territory, then you could have this in a report header, so you see an overall summary of the contacts followed by a section for each contact. Its not really a Sub Report. I tried putting it in details and got a mess. I need it to be in its own section. I guess I'm trying to print 4 reports one after the other on the same report. Any ideas? Thanks. DS
From the example above, imagine you wanted to produce a contact analysis
report where numbers of of contacts were broken down in 4 various ways, eg
by country, by sales territory, by industry type, etc then you could have 4
subreports on the main report. If the main report itself was not based on
any datasource - ie had a blank 'Record Source' property then it wouldn't
matter in which section you placed them - report header, detail or footer.
You simply place them one after the other.
I suppose the question is: Does the main report need a record source and if
so, how does it relate to the record source of the subreports.?
Eric Schittlipz wrote: "DS" <bo******@opton line.net> wrote in message news:Jh******** *****@fe08.lga. ..
Eric Schittlipz wrote:
"DS" <bo******@opton line.net> wrote in message news:yV***** ********@fe08.l ga...
Where do you add a Sub-Report? To the detail Section? Thanks DS
Most often that's where they belong, but they could go anywhere. Sticking to the polite locations to place them, suppose the main report was based on Contacts and the sub-report was based on a related table ContactNotes , then the detail section shows for each contact, and so if the subreport was here, you'd see the related notes for each contact. If however, you subreport showed a breakdown summary of your contacts table, eg number of contacts per sales territory, then you could have this in a report header, so you see an overall summary of the contacts followed by a section for each contact.
Its not really a Sub Report. I tried putting it in details and got a mess. I need it to be in its own section. I guess I'm trying to print 4 reports one after the other on the same report. Any ideas? Thanks. DS From the example above, imagine you wanted to produce a contact analysis report where numbers of of contacts were broken down in 4 various ways, eg by country, by sales territory, by industry type, etc then you could have 4 subreports on the main report. If the main report itself was not based on any datasource - ie had a blank 'Record Source' property then it wouldn't matter in which section you placed them - report header, detail or footer. You simply place them one after the other. I suppose the question is: Does the main report need a record source and if so, how does it relate to the record source of the subreports.?
The main report is based on a Query. I have 3 other "Sub-Reports" to
add to this main one.
DS
"DS" <bo******@opton line.net> wrote in message
news:jl******** *******@fe08.lg a... Eric Schittlipz wrote: "DS" <bo******@opton line.net> wrote in message news:Jh******** *****@fe08.lga. ..
Eric Schittlipz wrote:
"DS" <bo******@opton line.net> wrote in message news:yV**** *********@fe08. lga...
>Where do you add a Sub-Report? To the detail Section? >Thanks >DS
Most often that's where they belong, but they could go anywhere. Sticking to the polite locations to place them, suppose the main report was based on Contacts and the sub-report was based on a related table ContactNote s, then the detail section shows for each contact, and so if the subreport was here, you'd see the related notes for each contact. If however, you subreport showed a breakdown summary of your contacts table, eg number of contacts per sales territory, then you could have this in a report header, so you see an overall summary of the contacts followed by a section for each contact.
Its not really a Sub Report. I tried putting it in details and got a mess. I need it to be in its own section. I guess I'm trying to print 4 reports one after the other on the same report. Any ideas? Thanks. DS From the example above, imagine you wanted to produce a contact analysis report where numbers of of contacts were broken down in 4 various ways, eg by country, by sales territory, by industry type, etc then you could have 4 subreports on the main report. If the main report itself was not based on any datasource - ie had a blank 'Record Source' property then it wouldn't matter in which section you placed them - report header, detail or footer. You simply place them one after the other. I suppose the question is: Does the main report need a record source and if so, how does it relate to the record source of the subreports.? The main report is based on a Query. I have 3 other "Sub-Reports" to add to this main one. DS
But still we don't know if they are related in any way and you don't give
any further clues as to what the report should look like. We don't know
whether you need to see a list of related data for each record in the main
datasource (like the contacts/contacts notes example) or whether the four
reports are self-contained (as per the last contact analysis example). This
makes such a big difference because you need to decide if you need entries
for the Link Master and Link Child Fields.
If the four reports are not related, then you could create a fifth report
(with a blank recordsource) and have the other four reports all as
subreports in the detail section (or in fact any other). Alternatively, put
the 3 subreports in the footer section of the first report making sure you
have no unnecessary Link Master and Link Child Fields entered. This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics |
by: BStorm |
last post by:
I have a transaction log file where the DataSet table's Description column
is actually delimited into "subcolumns" based upon the transaction id. I
would like to parse these into separate fields for reporting purposes and am
wondering if anyone knows if this is easily accomplished using the .NET
version of Crystal Reports?
For example, the description column may be reporting on a dataentry error as
follows:
TXNCODE: 1010001
|
by: Andrew |
last post by:
Hi there:
I can successfully control a report's GroupLevel ControlSource property by
using:
..Reports!rptEESTMT_A.GroupLevel(i).ControlSource = "CorpName"
where rptEESTMT_A is the actual name of the Access Report.
However, I have about 75 reports to process. Each report has its own unique
|
by: Ian |
last post by:
(Sorry if I have repeated this, it did not appear the first time)
I have the following code on a button. The idea is that when this button is
clicked it prints several reports automatically then loops through several
other reports and prints them. These reports are not sent to a printer but
sent to a program called Fine Print PDF Factory which turns them into a PDF
file (set as the default printer)
This all works perfectly unless any...
|
by: Gheaci Maschl |
last post by:
Hi all!
I would like to have your opinion about my problem and my proposal how
to solve it:
Ingredients:
- BTriev database
- Crystal Reports
- maybe MS Access
- Liinos6 (small ERP software)
|
by: KEVIN97810 |
last post by:
Hello to all,
I am trying to fill all my reports in a listbox but I may not need
to show other reports. How do you modify this function to do that. I have
losts of reports but don't want to show all of them. I need to exculed certain
reports from the list box.
Public Function EnumReports(fld As Control, id As Variant, row As Variant, col
As Variant, code As Variant) As Variant
' Purpose: Supplies the name of all saved reports to a...
| |
by: B.Newman |
last post by:
I've got some VB.NET code that *should* get a list of reports from an
Access MDB and populate a list box with them.
It doesn't detect any of the reports at all. oAccess.Reports.Count
comes up as 0. There are four reports in the MDB. They are not hidden.
They don't have special characters in their names. There is no security
on the MDB and no one else is accessing it.
I have code currently to only show reports that start with "rpt_",...
|
by: VMI |
last post by:
I know this may not be the best NG for this, but I feel you guys know more
about this than any of the other NGs.
I need to build several simple reports (over 50 of them and they get their
data from sql server) and I was wondering whish of these is the better tool
.. We're still not sure if they'll be loaded from an existing VB6 application
or if I'll have to make a separate module for them (in .Net).
In general, which is the better tool?...
|
by: Tony Ciconte |
last post by:
We are evaluating the prospect of integrating and/or using Crystal
Reports with some of our current products. Some of these are still in
Access 97 and are running well. Since we cannot include the report
wizard in a runtime environment, we are looking at ad hoc report
writers like Crystal.
Can we include Crystal with our runtimes and/or is there another
report writer that we should be looking at? Any and all help is
greatly appreciated.
|
by: JoeW |
last post by:
I'm utilizing a database that I created within MS Access within a
program I've created in VB.NET. I am using the VB front end to
navigate the information, but want to be able to print a report, that
I've also created within MS Access. I've attempted using the
Access.Application instance, but I get errors when it tries to load the
database. Just wondering if anyone has any experience with this, and
what I should do.
Thanks for any...
|
by: joelpollock |
last post by:
I'm having trouble continuously page numbering a large report in MS
Access. The report is made up of three separate Access reports which I
join together at the end.
In the past I have opened the reports and viewed them to see how long
they are then go in and manually type the page number and total page
number.
I am aware of the and lines of code but this resets with
each new report.
|
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look !
Part I. Meaning of...
| |
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
|
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed.
This is as boiled down as I can make it.
Here is my compilation command:
g++-12 -std=c++20 -Wnarrowing bit_field.cpp
Here is the code in...
|
by: jinu1996 |
last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth.
The Art of Business Website Design
Your website is...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
| |
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
|
by: bsmnconsultancy |
last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...
| |