473,748 Members | 8,392 Online
Bytes | Software Development & Data Engineering Community
+ Post

Home Posts Topics Members FAQ

ASP connecting to linked table in ACCESS (cannot find the input table or query)

Tim
Hi, I'm using ASP to connect to an ACCESS database (db1) via ODBC.
The table that I connect to (table1) in db1 is an ACCESS query linked
to data in another database (db2).

When I try the connection from a web browser I get the following
message:

Error Type:
Microsoft OLE DB Provider for ODBC Drivers (0x80004005)
[Microsoft][ODBC Microsoft Access Driver] The Microsoft Jet database
engine cannot open the file 'M:\db2.mdb'. It is already opened
exclusively by another user, or you need permission to view its data.
/asp_dsk.asp, line 25

All the other postings seem to indicate this is a permissions issue
but I've granted full control on both dbs to "everyone" as well as the
default anonymous internet user.

also, If I open db1 directly from ACCESS and open table1 it opens the
linked data from db2 with no problems.

This was all working fine until about a week ago and I can't figure
out what I must have done to break it. Any ideas?

Tim
Nov 12 '05 #1
2 5561
On 9 Feb 2004 08:05:42 -0800, en****@hotmail. com (Tim) wrote:
Hi, I'm using ASP to connect to an ACCESS database (db1) via ODBC.
The table that I connect to (table1) in db1 is an ACCESS query linked
to data in another database (db2).

When I try the connection from a web browser I get the following
message:

Error Type:
Microsoft OLE DB Provider for ODBC Drivers (0x80004005)
[Microsoft][ODBC Microsoft Access Driver] The Microsoft Jet database
engine cannot open the file 'M:\db2.mdb'. It is already opened
exclusively by another user, or you need permission to view its data.
/asp_dsk.asp, line 25

All the other postings seem to indicate this is a permissions issue
but I've granted full control on both dbs to "everyone" as well as the
default anonymous internet user.

also, If I open db1 directly from ACCESS and open table1 it opens the
linked data from db2 with no problems.

This was all working fine until about a week ago and I can't figure
out what I must have done to break it. Any ideas?

Tim


You might do better in an ASP or IIS group, but take a look at this...

http://www.aspfaq.com/show.asp?id=2009

- Jim
Nov 12 '05 #2
Tim
Thank you Jim,

The answer was in article 189408
(http://support.microsoft.com/?kbid=189408) that you provided.

Symptoms
If you access a local Microsoft Access database that is linked to
a table
where the table linked to is in an Access database on a network
server,
you receive the following error message:
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Microsoft Access 97 Driver] The Microsoft Jet
Database engine cannot open the file '******'. It is already
opened
exclusively by another user, or you need permission to view its
data.

RESOLUTION
Disable password synchronization for the Internet Information
Server 4.0 application. For IIS 5.0, do not allow IIS to control
the password. To do this, perform the following steps:

I unchecked "Allow IIS to control password" for the anonymous user
account in IIS and all was golden.

Tim
Nov 12 '05 #3

This thread has been closed and replies have been disabled. Please start a new discussion.

Similar topics

0
1154
by: Noah | last post by:
freeBSD 4-8 STABLE cant install Python-2.3.3 configure: creating ./config.status config.status: creating Makefile.pre config.status: creating Modules/Setup.config config.status: error: cannot find input file: Modules/Setup.config.in clues please?
0
1338
by: TERMAN, IRA, ALABS | last post by:
Hello, I am trying to install Python-2.3. I get the following error when I run ./configure --with-csx=gcc on my Solaris machine. config.status: error: cannot find input file: Modules/Setup.config.in My system shows: # uname -svrm SunOS 5.8 Generic_108528-23 sun4u
0
316
by: Tim | last post by:
Hi, I'm using ASP to connect to an ACCESS database (db1) via ODBC. The table that I connect to (table1) in db1 is an ACCESS query linked to data in another database (db2). When I try the connection from a web browser I get the following message: Error Type: Microsoft OLE DB Provider for ODBC Drivers (0x80004005) The Microsoft Jet database
2
4968
by: dskillingstad | last post by:
I'm building a tracking system and I'm having some problems. I thought this was relatively easy, but.... I have the following tables and fields (abbreviated): tblPermitMain PermitID - pk ApplicantID (from tblApplicant) PropertyID (from tblProperty) PermitNumber PermitApprovalDate
0
1666
by: Bob | last post by:
Just thought I'd share my experience today with this error message. I received it when doing an .update on a recordset .add. The fieldname that the error message included wasn't even in the table that I was updating, so I was kind of lost. Eventually, I discovered a required field in the table that I wasn't setting in the .add. When that was corrected the error message cleared.
3
6683
by: Rahul B | last post by:
Hi, I have a user UCLDEV1 which is a part of staff and a group(db2schemagrp1) to which i have not given any permissions. The authorizations of that user are shown as db2 =get authorizations Administrative Authorizations for Current User
6
3672
by: warpcon | last post by:
Im trying to build a database starting with one of the templates that come with access. I took out the employee part in all the tables and forms. Now when I pull up a workorder and then try to view the report on it it gives me the message " Ms jet database engine cannot find the input table or query ' Employees'. Make sure it exists and that its name is spelled correctly. I deleted the employee parts on purpose because I didnt need it. Where...
1
2602
by: vivek samantray | last post by:
I have a query.When i try to create a index on one of the table the index gets created but when i take the output it stuill shows "TABLE ACCESS FULL" Please see below what i did QUERY ====== SELECT b.DPT_EVNT_ID, b.DPT_ENTITY_ID, a.EDD_DT, b.DPT_DPT_ID, b.OU_ID,
0
8991
marktang
by: marktang | last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look ! Part I. Meaning of...
0
8830
by: Hystou | last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it. First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
0
9541
Oralloy
by: Oralloy | last post by:
Hello folks, I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>". The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed. This is as boiled down as I can make it. Here is my compilation command: g++-12 -std=c++20 -Wnarrowing bit_field.cpp Here is the code in...
0
9247
tracyyun
by: tracyyun | last post by:
Dear forum friends, With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
1
6796
isladogs
by: isladogs | last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM). In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules. He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms. Adolph will...
0
6074
by: conductexam | last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one. At the time of converting from word file to html my equations which are in the word document file was convert into image. Globals.ThisAddIn.Application.ActiveDocument.Select();...
0
4874
by: adsilva | last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
2
2782
muto222
by: muto222 | last post by:
How can i add a mobile payment intergratation into php mysql website.
3
2215
bsmnconsultancy
by: bsmnconsultancy | last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...

By using Bytes.com and it's services, you agree to our Privacy Policy and Terms of Use.

To disable or enable advertisements and analytics tracking please visit the manage ads & tracking page.