The following problem seems to manifest itself in Access 2000, but I
have not experienced it with Access 97.
When I make a duplicate of a form before I make design changes to that
form that I may want to reverse, it seems to screw up the code for the
whole database. This seems to be caused by some sort of conflict
between the code for the two identical forms.
Obviously, if one doesn't have a recent backup, they have a major
problem on their hands.
Has anyone experienced this behaviour, and is there a way around it?
Why does it seem to manifest itself in Access 2000 but not in Access
97?
Thanks in advance.
2  1350 
I believe that I did this in Access 2000 without a problem. However, I
wonder if it is a side effect of the following article. If it is, I believe
that the vbe6.dll file mentioned in the article is updated in Office 2000
SP3. http://support.microsoft.com/default...roduct=acc2000
--
Wayne Morgan
Microsoft Access MVP
"Wayne Aprato" <cq*******@volc anomail.com> wrote in message
news:4d******** *************** ***@posting.goo gle.com... The following problem seems to manifest itself in Access 2000, but I
have not experienced it with Access 97.
When I make a duplicate of a form before I make design changes to that
form that I may want to reverse, it seems to screw up the code for the
whole database. This seems to be caused by some sort of conflict
between the code for the two identical forms.
Obviously, if one doesn't have a recent backup, they have a major
problem on their hands.
Has anyone experienced this behaviour, and is there a way around it?
Why does it seem to manifest itself in Access 2000 but not in Access
97?
Thanks in advance.
"Wayne Morgan" <co************ *************** @hotmail.com> wrote in message news:<o3******* ************@ne wssvr32.news.pr odigy.com>... I believe that I did this in Access 2000 without a problem. However, I
wonder if it is a side effect of the following article. If it is, I believe
that the vbe6.dll file mentioned in the article is updated in Office 2000
SP3.
http://support.microsoft.com/default...roduct=acc2000
--
Wayne Morgan
Microsoft Access MVP
"Wayne Aprato" <cq*******@volc anomail.com> wrote in message
news:4d******** *************** ***@posting.goo gle.com... The following problem seems to manifest itself in Access 2000, but I
have not experienced it with Access 97.
When I make a duplicate of a form before I make design changes to that
form that I may want to reverse, it seems to screw up the code for the
whole database. This seems to be caused by some sort of conflict
between the code for the two identical forms.
Obviously, if one doesn't have a recent backup, they have a major
problem on their hands.
Has anyone experienced this behaviour, and is there a way around it?
Why does it seem to manifest itself in Access 2000 but not in Access
97?
Thanks in advance.
Thanks very much Wayne. That was the problem. I think I'll just use
Access XP in future and use Access 2000 to compile the mde if I need
it in Access 2000 format.
Regards. This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics | |
by: dananrg |
last post by:
I've created a small company database where the tables reside in a SQL
Server database. I'm using Access 2000 forms for a front end.
I've got a System DSN set-up to SQL Server and am using links within
Access 2000 to get to the SQL Server tables.
My forms worked fine until I made a few minor changes to the database
schema on SQL Server (e.g. added a foreign key, or added a column).
After that, all the links break - I click on a table...
|
by: Sam Gledhill |
last post by:
I hope somebody can help me, I have a problem executing this line of
sql:
Dim rstur As New Recordset
Dim sql As String
sql = "SELECT * FROM tblpat WHERE ='" &
Me! & "'"
Set rstur = CurrentDb.OpenRecordset(sql)
|
by: Chris Bolus |
last post by:
I'm a teacher using MS Access on an RMConnect 2.4 network. On some
workstations both I and my students sometimes get an error message
when attempting to insert a command button on a form which reads
"Invalid
use of null". The remainder of the options in the Command Button
Wizard are then unavailable and
the button wil not work.
The only solution is to log on to a different workstation.
Any ideas?
|
by: Sabine Oebbecke |
last post by:
Hi Experts!
I have several forms and reports where controls get their values with
'Forms!MainForm!Control' or 'Forms!MainForm!Subform!Control' resp
'Forms!MainForm!Subform.Form!Control' which works without any problem
in Acc97, 2000 and 2002, but now in Access 2003 there seem to be a
problem with this.
A user is working with my app, and he uses an Access 2002 MDE in an
Access 2003 environment.
|
by: Chris |
last post by:
I am trying to do a mail merge from Access 2000/2002 through VBA to a
Word document. It all works fine on all Windows 2000 machines
(regardless of if it is Office 2000 or 2002) but it doesn't work on
any Windows XP machines. I get a 4605 error and there is no
documentation I can find on this anywhere on the internet. I have
checked file permissions on all files. I get errors on the 2 lines
marked XX. The Word document is not protected. It...
| | |
by: gsb58 |
last post by:
Hi!
Recently we, in Norway changed to three different VAT levels. All three
needs to be on the invoice program. This is easy obtained via a new
field and set the rowsource to valuelist and make the three values :
0;0,00;0,06;0,12;0,25.
However my problem is calculating the orderlines and make them be
summed in a textbox in the footer of the frmOrderlines.
|
by: Anthony Paul |
last post by:
Hello everyone,
There's an interesting SQL problem I've come across that I'm currently
banging my head against. Given the following table that contains item
location information populated every minute :
location_id date_created
=========== ============
5 2000-01-01 01:00 <-- Don't need
5 2000-01-01 01:01 <-- Don't need
|
by: zufie |
last post by:
Hi,
I created some forms using the "Create form using Wizard".
However, I cannot view the forms I created with Wizard unless I click
on the Design View icon.
I checked the forms' properties to no avail.
What did I do wrong? How do I correct and avoid this mistake in the
|
by: rleepac |
last post by:
This is a little complicated but I'll do my best to explain. In my db I have a table called L_AgeCorrection which has the following fields: Age, Sex, Frequency, AgeValue
This is a table used to assign an Age Correction value to hearing test results - since some degree of hearing loss naturally occurs with aging - OSHA lets us calculate that in before determining if the employee has an actual "significant" hearing loss.
Anyway...I have my...
|
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look !
Part I. Meaning of...
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
| | |
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed.
This is as boiled down as I can make it.
Here is my compilation command:
g++-12 -std=c++20 -Wnarrowing bit_field.cpp
Here is the code in...
|
by: Hystou |
last post by:
Overview:
Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
|
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
| | |
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
| |
