Visual Studio 2005 - SP1 - VB.Net on WinXP SP2
I add a typed dataset to my solution and get the following errors :
Error 1 sub 'ReadXmlSeriali zable' cannot be declared 'Overrides' because it
does not override a sub in a base class.
C:\AAProjects.N et\TRM8\TRM8.UI \Reports\Billin gReport.Designe r.vb 125 29
TRM8.UI
Error 2 'Protected Overrides Function GetSchemaSerial izable() As
System.Xml.Sche ma.XmlSchema' cannot override 'Protected Overridable Function
GetSchemaSerial izable() As System.Xml.Sche ma.XmlSchema' because they differ
by their return types.
C:\AAProjects.N et\TRM8\TRM8.UI \Reports\Billin gReport.Designe r.vb 145 34
TRM8.UI
I have a reference to System.Xml.
If I start a new project, and add a typed dataset, this error does not
occur.
Can anyone help me with this frustrating problem.
TIA
8  1986 
How are you adding the typed dataset to your solution?
Robin S.
---------------------------
"Harry Strybos" <ha**********@f fapaysmart.com. auwrote in message
news:gM******** ***********@nas al.pacific.net. au...
Visual Studio 2005 - SP1 - VB.Net on WinXP SP2
I add a typed dataset to my solution and get the following errors :
Error 1 sub 'ReadXmlSeriali zable' cannot be declared 'Overrides'
because it does not override a sub in a base class.
C:\AAProjects.N et\TRM8\TRM8.UI \Reports\Billin gReport.Designe r.vb 125
29 TRM8.UI
Error 2 'Protected Overrides Function GetSchemaSerial izable() As
System.Xml.Sche ma.XmlSchema' cannot override 'Protected Overridable
Function GetSchemaSerial izable() As System.Xml.Sche ma.XmlSchema'
because they differ by their return types.
C:\AAProjects.N et\TRM8\TRM8.UI \Reports\Billin gReport.Designe r.vb 145
34 TRM8.UI
I have a reference to System.Xml.
If I start a new project, and add a typed dataset, this error does not
occur.
Can anyone help me with this frustrating problem.
TIA
"RobinS" <Ro****@NoSpam. yah.nonewrote in message
news:dI******** *************** *******@comcast .com...
How are you adding the typed dataset to your solution?
Robin S.
---------------------------
"Harry Strybos" <ha**********@f fapaysmart.com. auwrote in message
news:gM******** ***********@nas al.pacific.net. au...
>Visual Studio 2005 - SP1 - VB.Net on WinXP SP2
I add a typed dataset to my solution and get the following errors :
Error 1 sub 'ReadXmlSeriali zable' cannot be declared 'Overrides' because
it does not override a sub in a base class.
C:\AAProjects. Net\TRM8\TRM8.U I\Reports\Billi ngReport.Design er.vb 125 29
TRM8.UI
Error 2 'Protected Overrides Function GetSchemaSerial izable() As
System.Xml.Sch ema.XmlSchema' cannot override 'Protected Overridable
Function GetSchemaSerial izable() As System.Xml.Sche ma.XmlSchema' because
they differ by their return types.
C:\AAProjects. Net\TRM8\TRM8.U I\Reports\Billi ngReport.Design er.vb 145 34
TRM8.UI
I have a reference to System.Xml.
If I start a new project, and add a typed dataset, this error does not
occur.
Can anyone help me with this frustrating problem.
TIA
Project/Add New Item/Dataset......
The whole thing is then built by the IDE. Error appears immediately. Adding
an actual query (Sql 2005) via Server Explorer does not make the problem go
away
"Harry Strybos" <ha***@nospam.c om.auwrote in message
news:53******** ******@news-server.bigpond. net.au...
"RobinS" <Ro****@NoSpam. yah.nonewrote in message
news:dI******** *************** *******@comcast .com...
>How are you adding the typed dataset to your solution?
Robin S.
---------------------------
"Harry Strybos" <ha**********@f fapaysmart.com. auwrote in message
news:gM******* ************@na sal.pacific.net .au...
>>Visual Studio 2005 - SP1 - VB.Net on WinXP SP2
I add a typed dataset to my solution and get the following errors :
Error 1 sub 'ReadXmlSeriali zable' cannot be declared 'Overrides'
because it does not override a sub in a base class.
C:\AAProjects .Net\TRM8\TRM8. UI\Reports\Bill ingReport.Desig ner.vb 125
29 TRM8.UI
Error 2 'Protected Overrides Function GetSchemaSerial izable() As
System.Xml.Sc hema.XmlSchema' cannot override 'Protected Overridable
Function GetSchemaSerial izable() As System.Xml.Sche ma.XmlSchema'
because they differ by their return types.
C:\AAProjects .Net\TRM8\TRM8. UI\Reports\Bill ingReport.Desig ner.vb 145
34 TRM8.UI
I have a reference to System.Xml.
If I start a new project, and add a typed dataset, this error does
not occur.
Can anyone help me with this frustrating problem.
TIA
Project/Add New Item/Dataset......
The whole thing is then built by the IDE. Error appears immediately.
Adding an actual query (Sql 2005) via Server Explorer does not make
the problem go away
What is your dataset called? Are you calling it something that already
exists somewhere within your sollutino? The errors above are from
BillingReport.D esigner.vb -- is BillingReport the name of your dataset?
Is it something else within your project?
Robin S.
"RobinS" <Ro****@NoSpam. yah.nonewrote in message
news:to******** *************** *******@comcast .com...
"Harry Strybos" <ha***@nospam.c om.auwrote in message
news:53******** ******@news-server.bigpond. net.au...
>"RobinS" <Ro****@NoSpam. yah.nonewrote in message
news:dI******* *************** ********@comcas t.com...
>>How are you adding the typed dataset to your solution?
Robin S.
---------------------------
"Harry Strybos" <ha**********@f fapaysmart.com. auwrote in message
news:gM****** *************@n asal.pacific.ne t.au...
Visual Studio 2005 - SP1 - VB.Net on WinXP SP2
I add a typed dataset to my solution and get the following errors :
Error 1 sub 'ReadXmlSeriali zable' cannot be declared 'Overrides'
because it does not override a sub in a base class.
C:\AAProject s.Net\TRM8\TRM8 .UI\Reports\Bil lingReport.Desi gner.vb 125 29
TRM8.UI
Error 2 'Protected Overrides Function GetSchemaSerial izable() As
System.Xml.S chema.XmlSchema ' cannot override 'Protected Overridable
Function GetSchemaSerial izable() As System.Xml.Sche ma.XmlSchema'
because they differ by their return types.
C:\AAProject s.Net\TRM8\TRM8 .UI\Reports\Bil lingReport.Desi gner.vb 145 34
TRM8.UI
I have a reference to System.Xml.
If I start a new project, and add a typed dataset, this error does not
occur.
Can anyone help me with this frustrating problem.
TIA
Project/Add New Item/Dataset......
The whole thing is then built by the IDE. Error appears immediately.
Adding an actual query (Sql 2005) via Server Explorer does not make the
problem go away
What is your dataset called? Are you calling it something that already
exists somewhere within your sollutino? The errors above are from
BillingReport.D esigner.vb -- is BillingReport the name of your dataset? Is
it something else within your project?
Robin S.
"BillingRep ort" is the name of the dataset.
That name or type does not exist elsewher in my solution. I di try this with
the same solution in my home office and the same problem occurs.
Just to add to all of this, I do have some reasonable experience with VS
2005, as IT Manager of an SME.
Thank you.
"Harry Strybos" <ha***@nospam.c om.auwrote in message
news:a%******** ******@news-server.bigpond. net.au...
"RobinS" <Ro****@NoSpam. yah.nonewrote in message
news:to******** *************** *******@comcast .com...
>"Harry Strybos" <ha***@nospam.c om.auwrote in message
news:53******* *******@news-server.bigpond. net.au...
>>"RobinS" <Ro****@NoSpam. yah.nonewrote in message
news:dI****** *************** *********@comca st.com...
How are you adding the typed dataset to your solution?
Robin S.
---------------------------
"Harry Strybos" <ha**********@f fapaysmart.com. auwrote in message
news:gM***** **************@ nasal.pacific.n et.au...
Visual Studio 2005 - SP1 - VB.Net on WinXP SP2
>
I add a typed dataset to my solution and get the following errors
:
>
Error 1 sub 'ReadXmlSeriali zable' cannot be declared 'Overrides'
because it does not override a sub in a base class.
C:\AAProjec ts.Net\TRM8\TRM 8.UI\Reports\Bi llingReport.Des igner.vb
125 29 TRM8.UI
>
Error 2 'Protected Overrides Function GetSchemaSerial izable() As
System.Xml. Schema.XmlSchem a' cannot override 'Protected
Overridab le Function GetSchemaSerial izable() As
System.Xml. Schema.XmlSchem a' because they differ by their return
types.
C:\AAProjec ts.Net\TRM8\TRM 8.UI\Reports\Bi llingReport.Des igner.vb
145 34 TRM8.UI
>
I have a reference to System.Xml.
>
If I start a new project, and add a typed dataset, this error does
not occur.
>
Can anyone help me with this frustrating problem.
>
TIA
>
Project/Add New Item/Dataset......
The whole thing is then built by the IDE. Error appears immediately.
Adding an actual query (Sql 2005) via Server Explorer does not make
the problem go away
What is your dataset called? Are you calling it something that
already exists somewhere within your sollutino? The errors above are
from BillingReport.D esigner.vb -- is BillingReport the name of your
dataset? Is it something else within your project?
Robin S.
"BillingRep ort" is the name of the dataset.
That name or type does not exist elsewher in my solution. I di try
this with the same solution in my home office and the same problem
occurs.
Just to add to all of this, I do have some reasonable experience with
VS 2005, as IT Manager of an SME.
I wasn't assuming you were a newbie; we all make these kinds of mistakes
once in a while, and it never hurts to doublecheck.
Does it only happen when you add that specific dataset? Are you choosing
a table in your database? Does it work when you pick a different table?
Robin S.
"RobinS" <Ro****@NoSpam. yah.nonewrote in message
news:dv******** *************** *******@comcast .com...
>
"Harry Strybos" <ha***@nospam.c om.auwrote in message
news:a%******** ******@news-server.bigpond. net.au...
>"RobinS" <Ro****@NoSpam. yah.nonewrote in message
news:to******* *************** ********@comcas t.com...
>>"Harry Strybos" <ha***@nospam.c om.auwrote in message
news:53****** ********@news-server.bigpond. net.au...
"RobinS" <Ro****@NoSpam. yah.nonewrote in message
news:dI***** *************** **********@comc ast.com...
How are you adding the typed dataset to your solution?
>
Robin S.
---------------------------
"Harry Strybos" <ha**********@f fapaysmart.com. auwrote in message
news:gM**** *************** @nasal.pacific. net.au...
>Visual Studio 2005 - SP1 - VB.Net on WinXP SP2
>>
>I add a typed dataset to my solution and get the following errors :
>>
>Error 1 sub 'ReadXmlSeriali zable' cannot be declared 'Overrides'
>because it does not override a sub in a base class.
>C:\AAProje cts.Net\TRM8\TR M8.UI\Reports\B illingReport.De signer.vb 125
>29 TRM8.UI
>>
>Error 2 'Protected Overrides Function GetSchemaSerial izable() As
>System.Xml .Schema.XmlSche ma' cannot override 'Protected Overridable
>Function GetSchemaSerial izable() As System.Xml.Sche ma.XmlSchema'
>because they differ by their return types.
>C:\AAProje cts.Net\TRM8\TR M8.UI\Reports\B illingReport.De signer.vb 145
>34 TRM8.UI
>>
>I have a reference to System.Xml.
>>
>If I start a new project, and add a typed dataset, this error does
>not occur.
>>
>Can anyone help me with this frustrating problem.
>>
>TIA
>>
>
Project/Add New Item/Dataset......
The whole thing is then built by the IDE. Error appears immediately.
Adding an actual query (Sql 2005) via Server Explorer does not make the
problem go away
What is your dataset called? Are you calling it something that already
exists somewhere within your sollutino? The errors above are from
BillingReport .Designer.vb -- is BillingReport the name of your dataset?
Is it something else within your project?
Robin S.
"BillingReport " is the name of the dataset.
That name or type does not exist elsewher in my solution. I di try this
with the same solution in my home office and the same problem occurs.
Just to add to all of this, I do have some reasonable experience with VS
2005, as IT Manager of an SME.
I wasn't assuming you were a newbie; we all make these kinds of mistakes
once in a while, and it never hurts to doublecheck.
Does it only happen when you add that specific dataset? Are you choosing a
table in your database? Does it work when you pick a different table?
Robin S.
My apologies. I wasn't trying to be beligerent. And you are quite right, we
all make some obvious mistakes from time to time.
I am able to reproduce this problem on a seconf development machine at my
home office. It seems there is something in my application (some 50 forms)
that is corrupting a reference somewhere. Interestingly, on one other
programmers machine, he can load my application and add a typed dataset
without error, yet when I load his update, the error reoccurs on my machine.
So, one machine does not show this error at all, two show it all the time
and one shows it in my application but not in a new project.
I have seen the same problem reported elsewhere but have not been able to
see any solutions. Searching the web with either of the error messages does
produce some results but no answere.
As I mentioned previously, the error occurs even before I assign a query or
table. While I am sure it is a bug (my other programmers have checked this
as well), there seems to be no apparent solution.
Perhaps somebody else may have the answer.
Cheers
"Harry Strybos" <ha**********@f fapaysmart.com. auwrote in message
news:Pv******** ***********@nas al.pacific.net. au...
"RobinS" <Ro****@NoSpam. yah.nonewrote in message
news:dv******** *************** *******@comcast .com...
>>
"Harry Strybos" <ha***@nospam.c om.auwrote in message
news:a%******* *******@news-server.bigpond. net.au...
>>"RobinS" <Ro****@NoSpam. yah.nonewrote in message
news:to****** *************** *********@comca st.com...
"Harry Strybos" <ha***@nospam.c om.auwrote in message
news:53***** *********@news-server.bigpond. net.au...
"RobinS" <Ro****@NoSpam. yah.nonewrote in message
news:dI**** *************** ***********@com cast.com...
>How are you adding the typed dataset to your solution?
>>
>Robin S.
>---------------------------
>"Harry Strybos" <ha**********@f fapaysmart.com. auwrote in message
>news:gM*** *************** *@nasal.pacific .net.au...
>>Visual Studio 2005 - SP1 - VB.Net on WinXP SP2
>>>
>>I add a typed dataset to my solution and get the following errors :
>>>
>>Error 1 sub 'ReadXmlSeriali zable' cannot be declared 'Overrides'
>>because it does not override a sub in a base class.
>>C:\AAProj ects.Net\TRM8\T RM8.UI\Reports\ BillingReport.D esigner.vb 125
>>29 TRM8.UI
>>>
>>Error 2 'Protected Overrides Function GetSchemaSerial izable() As
>>System.Xm l.Schema.XmlSch ema' cannot override 'Protected Overridable
>>Functio n GetSchemaSerial izable() As System.Xml.Sche ma.XmlSchema'
>>because they differ by their return types.
>>C:\AAProj ects.Net\TRM8\T RM8.UI\Reports\ BillingReport.D esigner.vb 145
>>34 TRM8.UI
>>>
>>I have a reference to System.Xml.
>>>
>>If I start a new project, and add a typed dataset, this error does
>>not occur.
>>>
>>Can anyone help me with this frustrating problem.
>>>
>>TIA
>>>
>>
Project/Add New Item/Dataset......
>
The whole thing is then built by the IDE. Error appears immediately.
Adding an actual query (Sql 2005) via Server Explorer does not make
the
problem go away
What is your dataset called? Are you calling it something that already
exists somewhere within your sollutino? The errors above are from
BillingRepor t.Designer.vb -- is BillingReport the name of your dataset?
Is it something else within your project?
Robin S.
"BillingRepor t" is the name of the dataset.
That name or type does not exist elsewher in my solution. I di try this
with the same solution in my home office and the same problem occurs.
Just to add to all of this, I do have some reasonable experience with VS
2005, as IT Manager of an SME.
I wasn't assuming you were a newbie; we all make these kinds of mistakes
once in a while, and it never hurts to doublecheck.
Does it only happen when you add that specific dataset? Are you choosing
a
table in your database? Does it work when you pick a different table?
Robin S.
My apologies. I wasn't trying to be beligerent. And you are quite right,
we
all make some obvious mistakes from time to time.
I am able to reproduce this problem on a seconf development machine at my
home office. It seems there is something in my application (some 50 forms)
that is corrupting a reference somewhere. Interestingly, on one other
programmers machine, he can load my application and add a typed dataset
without error, yet when I load his update, the error reoccurs on my
machine.
So, one machine does not show this error at all, two show it all the time
and one shows it in my application but not in a new project.
I have seen the same problem reported elsewhere but have not been able to
see any solutions. Searching the web with either of the error messages
does
produce some results but no answere.
As I mentioned previously, the error occurs even before I assign a query
or
table. While I am sure it is a bug (my other programmers have checked this
as well), there seems to be no apparent solution.
Perhaps somebody else may have the answer.
Cheers
Found the answer, thanks to a fellow called Todd M. Taylor :
So, I've think that my solution file had something wrong or there was
something in one of my projects that affect the other ones. The only strange
project was that one that had no errors. So I've removed it and the errors
magically disappeared. Adding project again errors started to appear again.
I've opend my project file with notepad and I've found that System.Xml
reference was written in this way:
<Reference Include="System .Xml, Version=2.0.0.0 , Culture=neutral ,
PublicKeyToken= b77a5c561934e08 9, processorArchit ecture=MSIL">
<SpecificVersio n>False</SpecificVersion >
<HintPath>..\.. \..\..\..\..\WI NDOWS\assembly\ GAC_MSIL\System .Xml\2.0.0.0__b 77a5c561934e089 \System.Xml.dll </HintPath>
</Reference>
I've changed this reference with this:
<Reference Include="System .Xml" />
.... and magically everything worked.
Cheers
"Harry Strybos" <ha**********@f fapaysmart.com. auwrote in message
news:is******** ***********@nas al.pacific.net. au...
"Harry Strybos" <ha**********@f fapaysmart.com. auwrote in message
news:Pv******** ***********@nas al.pacific.net. au...
>"RobinS" <Ro****@NoSpam. yah.nonewrote in message
news:dv******* *************** ********@comcas t.com...
>>>
"Harry Strybos" <ha***@nospam.c om.auwrote in message
news:a%****** ********@news-server.bigpond. net.au...
"RobinS" <Ro****@NoSpam. yah.nonewrote in message
news:to***** *************** **********@comc ast.com...
"Harry Strybos" <ha***@nospam.c om.auwrote in message
news:53**** **********@news-server.bigpond. net.au...
>"RobinS" <Ro****@NoSpam. yah.nonewrote in message
>news:dI*** *************** ************@co mcast.com...
>>How are you adding the typed dataset to your solution?
>>>
>>Robin S.
>>---------------------------
>>"Harry Strybos" <ha**********@f fapaysmart.com. auwrote in
>>message
>>news:gM** *************** **@nasal.pacifi c.net.au...
>>>Visual Studio 2005 - SP1 - VB.Net on WinXP SP2
>>>>
>>>I add a typed dataset to my solution and get the following
>>>errors :
>>>>
>>>Error 1 sub 'ReadXmlSeriali zable' cannot be declared
>>>'Overrid es'
>>>becaus e it does not override a sub in a base class.
>>>C:\AAPro jects.Net\TRM8\ TRM8.UI\Reports \BillingReport. Designer.vb
>>>125
>>>29 TRM8.UI
>>>>
>>>Error 2 'Protected Overrides Function GetSchemaSerial izable()
>>>As
>>>System.X ml.Schema.XmlSc hema' cannot override 'Protected
>>>Overrida ble
>>>Functi on GetSchemaSerial izable() As
>>>System.X ml.Schema.XmlSc hema'
>>>becaus e they differ by their return types.
>>>C:\AAPro jects.Net\TRM8\ TRM8.UI\Reports \BillingReport. Designer.vb
>>>145
>>>34 TRM8.UI
>>>>
>>>I have a reference to System.Xml.
>>>>
>>>If I start a new project, and add a typed dataset, this error
>>>does
>>>not occur.
>>>>
>>>Can anyone help me with this frustrating problem.
>>>>
>>>TIA
>>>>
>>>
>Project/Add New Item/Dataset......
>>
>The whole thing is then built by the IDE. Error appears
>immediatel y.
>Adding an actual query (Sql 2005) via Server Explorer does not
>make the
>problem go away
>
What is your dataset called? Are you calling it something that
already
exists somewhere within your sollutino? The errors above are from
BillingRepo rt.Designer.vb -- is BillingReport the name of your
dataset?
Is it something else within your project?
>
Robin S.
"BillingRepo rt" is the name of the dataset.
That name or type does not exist elsewher in my solution. I di try
this
with the same solution in my home office and the same problem
occurs.
Just to add to all of this, I do have some reasonable experience
with VS
2005, as IT Manager of an SME.
I wasn't assuming you were a newbie; we all make these kinds of
mistakes
once in a while, and it never hurts to doublecheck.
Does it only happen when you add that specific dataset? Are you
choosing a
table in your database? Does it work when you pick a different
table?
Robin S.
My apologies. I wasn't trying to be beligerent. And you are quite
right, we
all make some obvious mistakes from time to time.
I am able to reproduce this problem on a seconf development machine
at my
home office. It seems there is something in my application (some 50
forms)
that is corrupting a reference somewhere. Interestingly, on one other
programmers machine, he can load my application and add a typed
dataset
without error, yet when I load his update, the error reoccurs on my
machine.
So, one machine does not show this error at all, two show it all the
time
and one shows it in my application but not in a new project.
I have seen the same problem reported elsewhere but have not been
able to
see any solutions. Searching the web with either of the error
messages does
produce some results but no answere.
As I mentioned previously, the error occurs even before I assign a
query or
table. While I am sure it is a bug (my other programmers have checked
this
as well), there seems to be no apparent solution.
Perhaps somebody else may have the answer.
Cheers
Found the answer, thanks to a fellow called Todd M. Taylor :
So, I've think that my solution file had something wrong or there was
something in one of my projects that affect the other ones. The only
strange project was that one that had no errors. So I've removed it
and the errors magically disappeared. Adding project again errors
started to appear again.
I've opend my project file with notepad and I've found that System.Xml
reference was written in this way:
<Reference Include="System .Xml, Version=2.0.0.0 , Culture=neutral ,
PublicKeyToken= b77a5c561934e08 9, processorArchit ecture=MSIL">
<SpecificVersio n>False</SpecificVersion >
<HintPath>..\.. \..\..\..\..\WI NDOWS\assembly\ GAC_MSIL\System .Xml\2.0.0.0__b 77a5c561934e089 \System.Xml.dll </HintPath>
</Reference>
I've changed this reference with this:
<Reference Include="System .Xml" />
... and magically everything worked.
Cheers
Cool! Thanks for letting us know.
Robin S. This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics | |
by: Alex Ayzin |
last post by:
Hi,
I have a column in my WinGrid, that's being populated with numeric data, but
it's of String datatype(business rule requires to have these numbers as
varchars in DB). On top of that, I need to be able to sort on that
particular column. But because column contains character data(even though it
looks like digits), the sorting is all out of whack, e.g, 1, 11, 12,
13.....2, 21, 22, so on, you got the picture.I'm using the typed dataset as...
|
by: Sparky |
last post by:
Hi,
I am trying to use a typed dataset with a web service and am having problems
with type casting errors.
I have a typed dataset which is in both my web service and my consuming
application.
When I try to pass the typed dataset back to the consuming application from
the web service through a web service function call, I get a "Specified Cast
|
by: Nikolay Petrov |
last post by:
I have a Listbox binded to as DataSet.
Also I have sub to hadle SelectedIndexChanged event.
The problem is that every time the dataset is filled the
SelectedIndexChanged is fired.
How can I prevent this?
|
by: Optimus |
last post by:
Hi everyone,
I currently develop an application in vs.net 2005 with vb.net.
I was trying to use typed dataset and I've got in trouble for
converting untyped dataset
into Typed DataSet. I don't know why I cannot perform this casting
operation properly.
First off, I've got my Typed DataSet named "AuthInfo" declared and I
then created an instance of that class. What I'd like to do next is to
perform querying through the method...
|
by: Allen |
last post by:
We converted our app from 1.1 to 2 and some code was no longer working.
The case: From a non typed datatable, convert it to a typed one.
How to reproduce the bug:
-------------------------------
1) Create a project.
2) Add a new Dataset (keep DataSet1).
a) Add a new DataTable (Keep DataTable1)
b) Add a new DataColumn (Keep DataColumn1)
3) Add a new Window form.
| | |
by: Bob |
last post by:
Hi,
I have a typed unbound dataset that is passed to a datahandling class to be
filled.
The datahandling class fills it from a sproc using an oledbDataAdapter
(SQLAnywhere database)
The only table in the dataset has two int32 columns.
There is one row of data and as expected, column 0 contains an int and
column 1 contains a null.
I want to update column1.
The following code executes but the row cell remains unchanged.
|
by: Peter Bradley |
last post by:
Hi all,
This post is sort of tangentially related to my earlier posts on
configuration files for DLLs.
Does anyone know how to create typed DataSets using VS2005's new DataSet
designer, but with the ability to configure the connection string via a
config file? The designer seems to hard-code the connection string into the
dataset itself, which just can't be right.
|
by: Peter |
last post by:
Hi,
Let's assume I have a project called Main that contains most of the forms
and functionality of my application. Within the Main project is a definition
of a strongly-typed dataset and an instance of that dataset. The dataset
definition subsists as an XSD file, a VB file, and an XSX file.
Now in a separate project I am designing a control to be used in Main. The
control needs to have within it an instance of the typed dataset from...
|
by: Rachana |
last post by:
Hi,
I have understood Data Sets but what is meant by typed/untyped/
strongly typed datasets. Can any one explain me or suggest any site/
article, to get these concepts (and their comparisions) cleared?
Thanks,
Rachana
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
|
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed.
This is as boiled down as I can make it.
Here is my compilation command:
g++-12 -std=c++20 -Wnarrowing bit_field.cpp
Here is the code in...
| | |
by: jinu1996 |
last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth.
The Art of Business Website Design
Your website is...
|
by: Hystou |
last post by:
Overview:
Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: conductexam |
last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one.
At the time of converting from word file to html my equations which are in the word document file was convert into image.
Globals.ThisAddIn.Application.ActiveDocument.Select();...
|
by: adsilva |
last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
| | |
by: bsmnconsultancy |
last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...
| |
