I currently have a sql statement that works great. I want to convert it
to a stored procedure so I can generate results from a webpage. Below
is the stored procedure that is working fine.
select SUBSTRING(tblPe rsonnel.SSN_SM, 6,9) AS L4,
SIDPERS_PERS_UN IT_TBL.UNAME,
SIDPERS_PERS_UN IT_TBL.ADDR_CIT Y, SIDPERS_PERS_UN IT_TBL.PR_NBR,
[tblPersonnel].[ADDR_CITY] + ' ' + [tblPersonnel].[ZIP] AS HOR,
SMOSC=(case [tblSTAP Info].[SMOS Considered]
when "1" then "Yes"
else "No"
end),
FIRSTSGTC =(case [tblSTAP Info].[1SG]
when "1" then "Yes"
else "No"
end),
CSMC=(case [tblSTAP Info].[CSM]
when "1" then "Yes"
else "No"
end),
tblPersonnel.*, [tblSTAP Info].*
FROM SIDPERS_PERS_UN IT_TBL
INNER JOIN (tblPersonnel INNER JOIN [tblSTAP Info] ON
tblPersonnel.SS N_SM = [tblSTAP Info].SSN)
ON SIDPERS_PERS_UN IT_TBL.UPC = tblPersonnel.UP C
WHERE (SIDPERS_PERS_U NIT_TBL.RPT_SEQ _CODE LIKE ('AA__')) and
(tblPersonnel.P AY_GR = 'E5')
and (SUBSTRING (tblPersonnel.P MOS,1,3) IN ('71L', '75H'))
and ([tblSTAP Info].TotalPoints >=
(case tblPersonnel.PA Y_GR
when "E4" then 350
when "E5" then 400
when "E6" then 450
when "E7" then 500
when "E8" then 600
else 0
end))
AND [tblSTAP Info].NotConsidered = 0
ORDER BY tblPersonnel.PA Y_GR DESC , [tblSTAP Info].TotalPoints DESC ,
tblPersonnel.NA ME_IND;
I would like the 3 items under the where clause to recieve a variable
from the website:
(SIDPERS_PERS_U NIT_TBL.RPT_SEQ _CODE LIKE ('AA__'))
(tblPersonnel.P AY_GR = 'E5')
(SUBSTRING (tblPersonnel.P MOS,1,3) IN ('71L', '75H'))
Everytime I try to make this a stored procedure and try to pass multiple
values in the PMOS field, I get an error stating too many variables.
If anyone can tell me what the Stored Procedure should look like AND
what the ASP should look like to pass the variables, I would be much
obliged.
*** Sent via Developersdex http://www.developersdex.com ***
Don't just participate in USENET...get rewarded for it! 8 4501
[posted and mailed, please reply in news]
Tod Thames (to********@nc. ngb.army.mil) writes: I currently have a sql statement that works great. I want to convert it to a stored procedure so I can generate results from a webpage. Below is the stored procedure that is working fine.
select SUBSTRING(tblPe rsonnel.SSN_SM, 6,9) AS L4, SIDPERS_PERS_UN IT_TBL.UNAME, SIDPERS_PERS_UN IT_TBL.ADDR_CIT Y, SIDPERS_PERS_UN IT_TBL.PR_NBR, [tblPersonnel].[ADDR_CITY] + ' ' + [tblPersonnel].[ZIP] AS HOR, SMOSC=(case [tblSTAP Info].[SMOS Considered] when "1" then "Yes" else "No" end), FIRSTSGTC =(case [tblSTAP Info].[1SG] when "1" then "Yes" else "No" end), CSMC=(case [tblSTAP Info].[CSM] when "1" then "Yes" else "No" end), tblPersonnel.*, [tblSTAP Info].* FROM SIDPERS_PERS_UN IT_TBL INNER JOIN (tblPersonnel INNER JOIN [tblSTAP Info] ON tblPersonnel.SS N_SM = [tblSTAP Info].SSN) ON SIDPERS_PERS_UN IT_TBL.UPC = tblPersonnel.UP C WHERE (SIDPERS_PERS_U NIT_TBL.RPT_SEQ _CODE LIKE ('AA__')) and (tblPersonnel.P AY_GR = 'E5') and (SUBSTRING (tblPersonnel.P MOS,1,3) IN ('71L', '75H'))
and ([tblSTAP Info].TotalPoints >= (case tblPersonnel.PA Y_GR when "E4" then 350 when "E5" then 400 when "E6" then 450 when "E7" then 500 when "E8" then 600 else 0 end)) AND [tblSTAP Info].NotConsidered = 0 ORDER BY tblPersonnel.PA Y_GR DESC , [tblSTAP Info].TotalPoints DESC , tblPersonnel.NA ME_IND;
I would like the 3 items under the where clause to recieve a variable from the website:
(SIDPERS_PERS_U NIT_TBL.RPT_SEQ _CODE LIKE ('AA__'))
(tblPersonnel.P AY_GR = 'E5')
(SUBSTRING (tblPersonnel.P MOS,1,3) IN ('71L', '75H')) Everytime I try to make this a stored procedure and try to pass multiple values in the PMOS field, I get an error stating too many variables.
If anyone can tell me what the Stored Procedure should look like AND what the ASP should look like to pass the variables, I would be much obliged.
The SP would look like this:
CREATE PROCEDURE TodTahems @rpt_seq_code_p attern varchar(25),
@pay_gr char(2),
@pmos text
select SUBSTRING(tblPe rsonnel.SSN_SM, 6,9) AS L4,
...
ON SIDPERS_PERS_UN IT_TBL.UPC = tblPersonnel.UP C
JOIN iter_charlist_t o_table(@pmos) AS pmos ON
SUBSTRING (tblPersonnel.P MOS,1,3) = pmos.str
WHERE (SIDPERS_PERS_U NIT_TBL.RPT_SEQ _CODE LIKE @rpt_seq_code) and
(tblPersonnel.P AY_GR = @paygr)
...
The function iter_charlist_t o_table unpacks a comma-separated list
into a table. You find the code here: http://www.sommarskog.se/arrays-in-s...ist-of-strings
--
Erland Sommarskog, SQL Server MVP, so****@algonet. se
Books Online for SQL Server SP3 at http://www.microsoft.com/sql/techinf...2000/books.asp
I need a little more assistance. I did a copy and paste of the
"char_to_table_ sp" to create the procedure in my DB. I followed the
examples in you email.
I have everything working to push the variables from the asp page to the
stored procedure. The pages work fine when I only put in one value,
however it doesn't work when I input more than one value.
The information below is provided.
standinglist2_t est 'AAA_', 'E5', '71L, 75H'
doesn't return any values.
standinglist2_t est 'AAA_', 'E5', '71L'
returns several rows.
Here is the SP I created.
CREATE procedure standinglist2_t est
@rsc varchar(4),
@paygr varchar(3),
@mos varchar (5)
as
CREATE TABLE #strings (str nchar (20) NOT NULL)
EXEC charlist_to_tab le_sp @mos
select SUBSTRING(tblPe rsonnel.SSN_SM, 6,9) AS L4,
SIDPERS_PERS_UN IT_TBL.UNAME,
SIDPERS_PERS_UN IT_TBL.ADDR_CIT Y, SIDPERS_PERS_UN IT_TBL.PR_NBR,
[tblPersonnel].[ADDR_CITY] + ' ' + [tblPersonnel].[ZIP] AS HOR,
SMOSC=(case [tblSTAP Info].[SMOS Considered]
when "1" then "Yes"
else "No"
end),
FIRSTSGTC =(case [tblSTAP Info].[1SG]
when "1" then "Yes"
else "No"
end),
CSMC=(case [tblSTAP Info].[CSM]
when "1" then "Yes"
else "No"
end),
tblPersonnel.*, [tblSTAP Info].*
FROM
#strings s INNER JOIN
SIDPERS_PERS_UN IT_TBL INNER JOIN
tblPersonnel INNER JOIN
[tblSTAP Info] ON
tblPersonnel.SS N_SM = [tblSTAP Info].SSN
ON SIDPERS_PERS_UN IT_TBL.UPC = tblPersonnel.UP C
ON (SUBSTRING(tblP ersonnel.PMOS,1 ,3) = s.str)
WHERE (SIDPERS_PERS_U NIT_TBL.RPT_SEQ _CODE LIKE (@rsc)) and
(tblPersonnel.P AY_GR = @paygr)
and (SUBSTRING (tblPersonnel.P MOS,1,3) IN (@mos))
and ([tblSTAP Info].TotalPoints >=
(case tblPersonnel.PA Y_GR
when "E4" then 350
when "E5" then 400
when "E6" then 450
when "E7" then 500
when "E8" then 600
else 0
end))
AND [tblSTAP Info].NotConsidered = 0
ORDER BY tblPersonnel.PA Y_GR DESC , [tblSTAP Info].TotalPoints DESC ,
tblPersonnel.NA ME_IND;
Your help is really appreciated. If you need any other information to
assist, please let me know.
I am unable to access the website you reference in your first response
from my office. I had to wait until i got home to try it. Must be a
firewall issue.
Thanks again.
*** Sent via Developersdex http://www.developersdex.com ***
Don't just participate in USENET...get rewarded for it!
Further information below:
I am using SQL 7, so I went to the SQL Server 7 link on your site. I
used the List-of-string Procedure to try and make it work as opposed to
information below.
*** Sent via Developersdex http://www.developersdex.com ***
Don't just participate in USENET...get rewarded for it!
Tod Thames (to********@nc. ngb.army.mil) writes: The information below is provided.
standinglist2_t est 'AAA_', 'E5', '71L, 75H'
doesn't return any values.
There is a very simple explanation:
CREATE procedure standinglist2_t est @rsc varchar(4), @paygr varchar(3), @mos varchar (5) <----------------
Change the declaration of @mos to varchar(8000) or to text, to avoid
truncation issues.
I am unable to access the website you reference in your first response from my office. I had to wait until i got home to try it. Must be a firewall issue.
I registered the domain in the beginning of December, so it could be
slow propagation somewhere. You could also try with http://www.algonet.se/~sommar, which is the same site, but a less
pretty URL.
--
Erland Sommarskog, SQL Server MVP, so****@algonet. se
Books Online for SQL Server SP3 at http://www.microsoft.com/sql/techinf...2000/books.asp
I tried changing this: @mos varchar (5) <----------------
to
@mos varchar (8000)
I had the same problem. When one variable is sent, it works fine, but
when several are sent, it returns no rows.
So, I tried changing it to:
@mos text
and received this error:
Server: Msg 8114, Level 16, State 1, Line 1
Error converting data type text to ntext.
Server: Msg 306, Level 16, State 1, Procedure standinglist2_t est, Line 9
The text, ntext, and image data types cannot be used in the WHERE,
HAVING, or ON clause, except with the LIKE or IS NULL predicates.
I think I am very close to getting this resolved. Does anyone else have
any ideas?
I tried the link you provided in your last post and still couldn't get
to the site. I think it must be the firewall here.
Tod Thames
*** Sent via Developersdex http://www.developersdex.com ***
Don't just participate in USENET...get rewarded for it!
Tod Thames (an*******@devd ex.com) writes: I had the same problem. When one variable is sent, it works fine, but when several are sent, it returns no rows.
I went back to the stored procedure, and there are more problems:
and (SUBSTRING (tblPersonnel.P MOS,1,3) IN (@mos))
You need to remove this condition.
If there are further problems, I would recommend that you do some
debugging on your own. First thing is to add a "SELECT * FROM #strings"
to see that the table is correct. Next is to remove condition, until
rows starts to pop up. That's probably a more effective way than asking
for help and wait for someone to come by in the newsgroups.
--
Erland Sommarskog, SQL Server MVP, so****@algonet. se
Books Online for SQL Server SP3 at http://www.microsoft.com/sql/techinf...2000/books.asp
Thanks so much for the assistance. It worked after I took that last
statement out of the SP. I actually tried some debugging, but I am not
very proficient at it. I did the "select * from #strings", but received
this message.
Server: Msg 208, Level 16, State 1, Line 1
Invalid object name '#stings'.
I couldn't figure out how to get the results from a temporary table.
Since I couldn't get the results from the table that is populated, I
didn't really know where to go from there.
Anyway, it is working now and I thank you very much. That sp you wrote
amazes me.
Tod Thames
*** Sent via Developersdex http://www.developersdex.com ***
Don't just participate in USENET...get rewarded for it!
Tod Thames (an*******@devd ex.com) writes: Thanks so much for the assistance. It worked after I took that last statement out of the SP. I actually tried some debugging, but I am not very proficient at it. I did the "select * from #strings", but received this message.
Server: Msg 208, Level 16, State 1, Line 1 Invalid object name '#stings'.
Judging from the error message, you mispelled the table name. But that
may of course been a type when you posted.
--
Erland Sommarskog, SQL Server MVP, so****@algonet. se
Books Online for SQL Server SP3 at http://www.microsoft.com/sql/techinf...2000/books.asp This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics |
by: dinesh prasad |
last post by:
I'm trying to use a servlet to process a form, then send that data to
an SQL server stored procedure. I'm using the WebLogic 8 App. server.
I am able to retrieve database information, so I know my application
server can talk to the database.
I've determined the failure occurs when the the following statement is
executed: cstmt.execute(); (due to the failure of println statements
placed afterwards). I get the following error after trying to...
|
by: Tod Thames |
last post by:
I am running SQL Server 7.0 and using a web interface. I would like
for a user to be able to input multiple values into a single field
with some sort of delimiter (such as a comma). I want to pass this
field into a Stored Procedure and have the stored procedure use the
data to generate the resutls.
Example:
Web page would ask for ID number into a field called IDNum. User
could input one or many ID numbers separated by a comma or...
|
by: Nashat Wanly |
last post by:
HOW TO: Call a Parameterized Stored Procedure by Using ADO.NET and
Visual C# .NET
View products that this article applies to.
This article was previously published under Q310070
For a Microsoft Visual Basic .NET version of this article, see 308049.
For a Microsoft Visual C++ .NET version of this article, see 310071.
For a Microsoft Visual J# .NET version of this article, see 320627.
This article refers to the following Microsoft .NET...
|
by: Shawn Fletcher |
last post by:
Hi,
I'm trying to work around a bug that our helpdesk software has. When a new
issue is created, it cannot automatically default 2 fields to the value of
No like we need it to.
I have a field called "Audited" and one called "Billed to Client". When a
new issue is openned, it just leaves the value as Null in the database
instead of a value of No.
|
by: DanVDM |
last post by:
Came across this code.
SELECT Y,
Q1 = COUNT(CASE WHEN Q=1 THEN Sales END),
Q2 = COUNT(CASE WHEN Q=2 THEN Sales END),
Q3 = COUNT(CASE WHEN Q=3 THEN Sales END),
Q4 = COUNT(CASE WHEN Q=4 THEN Sales END)
FROM
dbo.SalesByQuarter
GROUP BY Y
| |
by: Rhino |
last post by:
Is it possible for a Java Stored Procedure in DB2 V7.2 (Windows) to pass a
Throwable back to the calling program as an OUT parameter?
If yes, what datatype should I use when registering the Throwable as an OUT
parameter and what datatype should I use in the CREATE PROCEDURE and DROP
PROCEDURE statements?
Here's what I tried:
- the method signature for the stored procedure included: Throwable
throwable
|
by: Thomasb |
last post by:
With a background in MS SQL Server programming I'm used to temporary
tables. Have just started to work with DB2 ver 7 on z/OS and stumbled
into the concept of GLOBAL TEMPORARY TABLE.
I have created a temporary database with a tables space. Verified that
DECLARE GLOBAL TEMPORARY TABLE TEMP (A INTEGER);
INSERT INTO SESSION.TEMP VALUES(10);
SELECT A FROM SESSION.TEMP;
works from a query tool.
|
by: Dino L. |
last post by:
How can I run stored procedure (MSSQL) ?
|
by: Dabbler |
last post by:
I'm using an ObjectDataSource with a stored procedure and am getting the
following error when trying to update (ExecuteNonQuery):
System.Data.SqlClient.SqlException: Procedure or Function 'UpdateRegistrant'
expects parameter '@EMail', which was not supplied.
The field value was null in the database and not changed in the FormView so
is null going back into the stored procedure. I'm stumped and would greatly
appreciate any suggestions.
|
by: jed |
last post by:
I have created this example in sqlexpress
ALTER PROCEDURE .
@annualtax FLOAT
AS
BEGIN
SELECT begin1,end1,deductedamount,pecentageextra
FROM tax
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
| |
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed.
This is as boiled down as I can make it.
Here is my compilation command:
g++-12 -std=c++20 -Wnarrowing bit_field.cpp
Here is the code in...
|
by: jinu1996 |
last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth.
The Art of Business Website Design
Your website is...
|
by: Hystou |
last post by:
Overview:
Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
|
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
|
by: conductexam |
last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one.
At the time of converting from word file to html my equations which are in the word document file was convert into image.
Globals.ThisAddIn.Application.ActiveDocument.Select();...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
| |
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
|
by: bsmnconsultancy |
last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...
| |