Cannot build _multiprocessin g, math,mmap and readline of Python 2.6 on FreeBSD 4.11 w/ gcc 2.95.4

Akira Kitada

Hi list,

I was trying to build Python 2.6 on FreeBSD 4.11 and found it failed
to build some of the modules.

"""
Failed to find the necessary bits to build these modules:
_bsddb _sqlite3 _tkinter
gdbm linuxaudiodev spwd
sunaudiodev
To find the necessary bits, look in setup.py in detect_modules( ) for
the module's name.
Failed to build these modules:
_multiprocessin g math mmap
readline
"""

Because I don't have Berkeley DB, SQLite3 tk, GDBM installed on the
system and running FreeBSD,
there is no wonder it failed to build _bsddb, _sqlite3, _tkinter,
gdbm, linuxaudiodev, spwd and sunaudiodev.

The problem is it failed to build _multiprocessin g, math, mmap and readline.

Here are the outputs of each build failure.

"""
building '_multiprocessi ng' extension
creating build/temp.freebsd-4.11-RELEASE-i386-2.6/usr/home/build/dev/Python-2.6/Modules/_multiprocessin g
gcc -pthread -fPIC -fno-strict-aliasing -DNDEBUG -g -O3 -Wall
-Wstrict-prototypes -DHAVE_SEM_OPEN= 1 -DHAVE_FD_TRANSF ER=1
-DHAVE_SEM_TIMED WAIT=1 -IModules/_multiprocessin g -I.
-I/usr/home/build/dev/Python-2.6/./
Include -I. -IInclude -I./Include -I/usr/local/include
-I/usr/home/build/dev/Python-2.6/Include
-I/usr/home/build/dev/Python-2.6 -c
/usr/home/build/dev/Python-2.6/Modules/_multiprocessin g/multiprocessing .c
-o b
uild/temp.freebsd-4.11-RELEASE-i386-2.6/usr/home/build/dev/Python-2.6/Modules/_multiprocessin g/multiprocessing .o
In file included from
/usr/home/build/dev/Python-2.6/Modules/_multiprocessin g/multiprocessing .h:24,
from
/usr/home/build/dev/Python-2.6/Modules/_multiprocessin g/multiprocessing .c:9:
/usr/include/arpa/inet.h:89: warning: parameter has incomplete type
/usr/include/arpa/inet.h:92: warning: parameter has incomplete type
/usr/include/arpa/inet.h:96: warning: parameter has incomplete type
/usr/home/build/dev/Python-2.6/Modules/_multiprocessin g/multiprocessing .c:
In function `multiprocessin g_sendfd':
/usr/home/build/dev/Python-2.6/Modules/_multiprocessin g/multiprocessing .c:102:
storage size of `dummy_iov' isn't known
/usr/home/build/dev/Python-2.6/Modules/_multiprocessin g/multiprocessing .c:102:
warning: unused variable `dummy_iov'
/usr/home/build/dev/Python-2.6/Modules/_multiprocessin g/multiprocessing .c:
In function `multiprocessin g_recvfd':
/usr/home/build/dev/Python-2.6/Modules/_multiprocessin g/multiprocessing .c:137:
storage size of `dummy_iov' isn't known
/usr/home/build/dev/Python-2.6/Modules/_multiprocessin g/multiprocessing .c:137:
warning: unused variable `dummy_iov'
"""

"""
building 'cmath' extension
gcc -pthread -fPIC -fno-strict-aliasing -DNDEBUG -g -O3 -Wall
-Wstrict-prototypes -I. -I/usr/home/build/dev/Python-2.6/./Include -I.
-IInclude -I./Include -I/usr/local/include
-I/usr/home/build/dev/Python-2.6/I
nclude -I/usr/home/build/dev/Python-2.6 -c
/usr/home/build/dev/Python-2.6/Modules/cmathmodule.c -o
build/temp.freebsd-4.11-RELEASE-i386-2.6/usr/home/build/dev/Python-2.6/Modules/cmathmodule.o
/usr/home/build/dev/Python-2.6/Modules/cmathmodule.c: In function
`special_type':
/usr/home/build/dev/Python-2.6/Modules/cmathmodule.c:7 9: warning:
implicit declaration of function `copysign'
/usr/home/build/dev/Python-2.6/Modules/cmathmodule.c: In function `c_acos':
/usr/home/build/dev/Python-2.6/Modules/cmathmodule.c:1 52: warning:
implicit declaration of function `asinh'
/usr/home/build/dev/Python-2.6/Modules/cmathmodule.c: In function `c_atanh':
/usr/home/build/dev/Python-2.6/Modules/cmathmodule.c:3 45: warning:
implicit declaration of function `log1p'
gcc -shared build/temp.freebsd-4.11-RELEASE-i386-2.6/usr/home/build/dev/Python-2.6/Modules/cmathmodule.o
-L/usr/local/lib -lm -o
build/lib.freebsd-4.11-RELEASE-i386-2.6/cmath.so
building 'math' extension
gcc -pthread -fPIC -fno-strict-aliasing -DNDEBUG -g -O3 -Wall
-Wstrict-prototypes -I. -I/usr/home/build/dev/Python-2.6/./Include -I.
-IInclude -I./Include -I/usr/local/include
-I/usr/home/build/dev/Python-2.6/I
nclude -I/usr/home/build/dev/Python-2.6 -c
/usr/home/build/dev/Python-2.6/Modules/mathmodule.c -o
build/temp.freebsd-4.11-RELEASE-i386-2.6/usr/home/build/dev/Python-2.6/Modules/mathmodule.o
/usr/home/build/dev/Python-2.6/Modules/mathmodule.c: In function `m_atan2':
/usr/home/build/dev/Python-2.6/Modules/mathmodule.c:11 8: warning:
implicit declaration of function `copysign'
/usr/home/build/dev/Python-2.6/Modules/mathmodule.c: In function `math_acosh':
/usr/home/build/dev/Python-2.6/Modules/mathmodule.c:27 2: `acosh'
undeclared (first use in this function)
/usr/home/build/dev/Python-2.6/Modules/mathmodule.c:27 2: (Each
undeclared identifier is reported only once
/usr/home/build/dev/Python-2.6/Modules/mathmodule.c:27 2: for each
function it appears in.)
/usr/home/build/dev/Python-2.6/Modules/mathmodule.c: In function `math_asinh':
/usr/home/build/dev/Python-2.6/Modules/mathmodule.c:27 6: `asinh'
undeclared (first use in this function)
/usr/home/build/dev/Python-2.6/Modules/mathmodule.c: In function `math_atanh':
/usr/home/build/dev/Python-2.6/Modules/mathmodule.c:28 3: `atanh'
undeclared (first use in this function)
/usr/home/build/dev/Python-2.6/Modules/mathmodule.c: In function
`math_copysign' :
/usr/home/build/dev/Python-2.6/Modules/mathmodule.c:28 8: `copysign'
undeclared (first use in this function)
/usr/home/build/dev/Python-2.6/Modules/mathmodule.c: In function `math_log1p':
/usr/home/build/dev/Python-2.6/Modules/mathmodule.c:30 1: `log1p'
undeclared (first use in this function)
/usr/home/build/dev/Python-2.6/Modules/mathmodule.c: In function `math_ldexp':
/usr/home/build/dev/Python-2.6/Modules/mathmodule.c:66 6: `copysign'
used prior to declaration
/usr/home/build/dev/Python-2.6/Modules/mathmodule.c:67 0: `copysign'
used prior to declaration
/usr/home/build/dev/Python-2.6/Modules/mathmodule.c: In function `math_modf':
/usr/home/build/dev/Python-2.6/Modules/mathmodule.c:69 9: `copysign'
used prior to declaration
/usr/home/build/dev/Python-2.6/Modules/mathmodule.c: In function `math_pow':
/usr/home/build/dev/Python-2.6/Modules/mathmodule.c:90 1: `copysign'
used prior to declaration
"""

"""
building 'mmap' extension
gcc -pthread -fPIC -fno-strict-aliasing -DNDEBUG -g -O3 -Wall
-Wstrict-prototypes -I. -I/usr/home/build/dev/Python-2.6/./Include -I.
-IInclude -I./Include -I/usr/local/include
-I/usr/home/build/dev/Python-2.6/I
nclude -I/usr/home/build/dev/Python-2.6 -c
/usr/home/build/dev/Python-2.6/Modules/mmapmodule.c -o
build/temp.freebsd-4.11-RELEASE-i386-2.6/usr/home/build/dev/Python-2.6/Modules/mmapmodule.o
/usr/home/build/dev/Python-2.6/Modules/mmapmodule.c: In function `initmmap':
/usr/home/build/dev/Python-2.6/Modules/mmapmodule.c:14 40: warning:
implicit declaration of function `my_getallocati ongranularity'
gcc -shared build/temp.freebsd-4.11-RELEASE-i386-2.6/usr/home/build/dev/Python-2.6/Modules/mmapmodule.o
-L/usr/local/lib -o build/lib.freebsd-4.11-RELEASE-i386-2.6/mmap.so
*** WARNING: renaming "mmap" since importing it failed:
build/lib.freebsd-4.11-RELEASE-i386-2.6/mmap.so: Undefined symbol
"my_getallocati ongranularity"
"""

"""
building 'readline' extension
gcc -pthread -fPIC -fno-strict-aliasing -DNDEBUG -g -O3 -Wall
-Wstrict-prototypes -I. -I/usr/home/build/dev/Python-2.6/./Include -I.
-IInclude -I./Include -I/usr/local/include
-I/usr/home/build/dev/Python-2.6/I
nclude -I/usr/home/build/dev/Python-2.6 -c
/usr/home/build/dev/Python-2.6/Modules/readline.c -o
build/temp.freebsd-4.11-RELEASE-i386-2.6/usr/home/build/dev/Python-2.6/Modules/readline.o
In file included from /usr/include/readline/readline.h:37,
from /usr/home/build/dev/Python-2.6/Modules/readline.c:31:
/usr/include/readline/keymaps.h:40: warning: function declaration
isn't a prototype
/usr/include/readline/keymaps.h:41: warning: function declaration
isn't a prototype
/usr/include/readline/keymaps.h:42: warning: function declaration
isn't a prototype
/usr/include/readline/keymaps.h:43: warning: function declaration
isn't a prototype
In file included from /usr/home/build/dev/Python-2.6/Modules/readline.c:31:
/usr/include/readline/readline.h:343: warning: function declaration
isn't a prototype
/usr/home/build/dev/Python-2.6/Modules/readline.c:38: syntax error
before `rl_compentry_f unc_t'
/usr/home/build/dev/Python-2.6/Modules/readline.c:38: warning:
function declaration isn't a prototype
/usr/home/build/dev/Python-2.6/Modules/readline.c: In function
`set_completion _display_matche s_hook':
/usr/home/build/dev/Python-2.6/Modules/readline.c:216:
`rl_compdisp_fu nc_t' undeclared (first use in this function)
/usr/home/build/dev/Python-2.6/Modules/readline.c:216: (Each
undeclared identifier is reported only once
/usr/home/build/dev/Python-2.6/Modules/readline.c:216: for each
function it appears in.)
/usr/home/build/dev/Python-2.6/Modules/readline.c:216: syntax error before `)'
/usr/home/build/dev/Python-2.6/Modules/readline.c: At top level:
/usr/home/build/dev/Python-2.6/Modules/readline.c:669: warning:
`on_completion_ display_matches _hook' defined but not used
"""

Because FreeBSD is not listed on
http://www.python.org/dev/peps/pep-0011/, I suppose it's still a
supported platform.
Any help, suggestions would be appreciated.

Thanks,

Akira

Oct 25 '08 #1

Subscribe Reply

2455

Similar topics

6236

A question about mmap() function

by: bite me if you can... | last post by:

The prototype of mmap() is: void * mmap(void *addr, size_t len, int prot, int flags, int fd, off_t offset); The second argument len is used to tell mmap() how many bytes I want to map. My question is: If len that i give to mmap() is larger than the size of mapping file, and some data are wrote to these exceeding speces, where are these data to be wrote to?

C / C++

1757

Build issue on AIX 5.3 with python 2.4.2

by: ktelep | last post by:

I'm trying to build python 2.4.2 on AIX 5.3 with the IBM xlC compiler as per the notes in the AIX Readme file. Basically my make fails with the errors listed below. I'm calling configure with: ../configure --with-gcc="xlc_r -q64" --with-cxx="xlC_r -q64" --disable-ipv6 AR="ar -X64" It looks like it's not resolving symbols in readline. I originally

Python

1891

Cannot force configure/setup.py to pick up location of readline(SFWrline) on Solaris 10

by: Chris Miles | last post by:

On a standard Solaris 10 installation with Sun-supplied open-source packages installed (like SFWrline for readline libs) I cannot seem to force Python configure/setup.py to build with readline support. SFWrline installs readline in /opt/sfw/lib & /opt/sfw/include (This is all attempted with Python-2.4.3 on Solaris 10 06/06 i386) With this configure: ../configure --prefix=/opt/python-2.4.3 --enable-shared

Python

5468

mmap thoughts

by: James T. Dennis | last post by:

I've been thinking about the Python mmap module quite a bit during the last couple of days. Sadly most of it has just been thinking ... and reading pages from Google searches ... and very little of it as been coding. Mostly it's just academic curiosity (I might be teaching an "overview of programming" class in a few months, and I'd use Python for most of the practical examples to cover a broad range of programming topics, including the...

Python

1787

ensuring GNU readline isn't used

by: Josh Paetzel | last post by:

Is there a way to ensure that GNU readline isn't used (even though support may have been compiled in?). I'm experiencing a licensing problem, I'd like to use the "cmd" module, for example, but my code is proprietary and hence, if cmd uses readline, I can't use cmd. Unfortunately, I can't control if the Python interpreter my customers may be using has readline compiled in. So, I'm wondering if there is anyway to tell Python libraries like...

Python

1120

Re: mmap class has slow "in" operator

by: Gabriel Genellina | last post by:

En Thu, 29 May 2008 19:17:05 -0300, Kris Kennaway <kris@FreeBSD.org> escribió: Looks like you should define the sq_contains member in mmap_as_sequence, and the type should have the Py_TPFLAGS_HAVE_SEQUENCE_IN flag set (all in mmapmodule.c) -- Gabriel Genellina

Python

1534

In-place memory manager, mmap (was: Fastest way to store ints andfloats on disk)

by: castironpi | last post by:

Hi, I've got an "in-place" memory manager that uses a disk-backed memory- mapped buffer. Among its possibilities are: storing variable-length strings and structures for persistence and interprocess communication with mmap. It allocates segments of a generic buffer by length and returns an offset to the reserved block, which can then be used with struct to pack values to store. The data structure is adapted from the GNU PAVL

Python

1954

Re: Cannot build _multiprocessing, math,mmap and readline of Python 2.6 on FreeBSD 4.11 w/ gcc 2.95.4

by: Akira Kitada | last post by:

Hi Marc-Andre, Thanks for the suggestion. I opened a ticket for this issue: http://bugs.python.org/issue4204 Now I understand the state of the multiprocessing module, but it's too bad to see math, mmap and readline modules, that worked fine before, cannot be built anymore.

Python

1815

Re: Cannot build _multiprocessing, math, mmap and readline of Python2.6 on FreeBSD 4.11 w/ gcc 2.95.4

by: M.-A. Lemburg | last post by:

On 2008-10-25 20:19, Akira Kitada wrote: Thanks. The errors you are getting appear to be related to either some missing header files or a missing symbol definition to enable these - looking at the ticket, you seem to have resolved all this already :-)

Python

9564

What is ONU?

by: marktang | last post by:

ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look ! Part I. Meaning of...

General

9387

Changing the language in Windows 10

by: Hystou | last post by:

Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it. First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...

Windows Server

10002

Maximizing Business Potential: The Nexus of Website Design and Digital Marketing

by: jinu1996 | last post by:

In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth. The Art of Business Website Design Your website is...

Online Marketing

9938

The easy way to turn off automatic updates for Windows 10/11

by: Hystou | last post by:

Overview: Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...

Windows Server

9823

Discussion: How does Zigbee compare with other wireless protocols in smart home applications?

by: tracyyun | last post by:

Dear forum friends, With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...

General

8822

AI Job Threat for Devs

by: agi2029 | last post by:

Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own.... Now, this would greatly impact the work of software developers. The idea...

Career Advice

6643

Couldn’t get equations in html when convert word .docx file to html file in C#.

by: conductexam | last post by:

I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one. At the time of converting from word file to html my equations which are in the word document file was convert into image. Globals.ThisAddIn.Application.ActiveDocument.Select();...

C# / C Sharp

5270

Trying to create a lan-to-lan vpn between two differents networks

by: TSSRALBI | last post by:

Hello I'm a network technician in training and I need your help. I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs. The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols. I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...

Networking - Hardware / Configuration

3528

How to add payments to a PHP MySQL app.

by: muto222 | last post by:

How can i add a mobile payment intergratation into php mysql website.

PHP