hi
I am working with a custom report, I try to change the code as per requirement and when i click ok , it errors out and report builder closes. I tried for almost 10 times
'I says Report builder has encountered a problem and needs to close.We are Sorry for the inconvenience.'
What might the problem all the data is lost and i have to start all over again from the first.
Please help me
7  1510 
hi
I am working with a custom report, I try to change the code as per requirement and when i click ok , it errors out and report builder closes. I tried for almost 10 times
'I says Report builder has encountered a problem and needs to close.We are Sorry for the inconvenience.'
What might the problem all the data is lost and i have to start all over again from the first.
Please help me
Do you mean you are not able to save the changes or not able to execute the report??
Please provide what you are trying to modify?
Actually the datamodel has a query with one table. I added one more table and two join conditions in the where clause. after doing this it is taking long time to connect to the database and suddenly i get that report error. The report error dialog box has two buttons, debug and cancel.
the report closes for both and the changes are not saved.
thank u
Actually the datamodel has a query with one table. I added one more table and two join conditions in the where clause. after doing this it is taking long time to connect to the database and suddenly i get that report error. The report error dialog box has two buttons, debug and cancel.
the report closes for both and the changes are not saved.
thank u
I think the session is expiring because of some syntax error in your query, or say "object does not exist error". Did you try connecting to the databse from report builder and then try modifying your query and check what happens?
I tried that way too and the result is te same. No Change. I connect to the clients database through VPN. Will this create any problem.
I tried that way too and the result is te same. No Change. I connect to the clients database through VPN. Will this create any problem.
Not really. Are you able to connect to the database from SQLPLUS? If Yes,
Then try this:
Take the query from the reports builder, modify as you want and run that in SQL PLUS and check if it executes fine.
I got it. When i try to add an extra table, SQL is hanging. ?Might be over load problem
I got it. When i try to add an extra table, SQL is hanging. ?Might be over load problem
Now check if the modified query executes by hardcoding some values in WHERE condition and you get result atleast after filtering the data by hardcoding. Then you could probably look at using HINTS to improve the performance by forcing your query to use an index for the table that you are including in the Query.
Sign in to post your reply or Sign up for a free account.
Similar topics | |
by: Nicola |
last post by:
Hi Everyone,
I am new to programming and would like to know how to
open an access Report from within vb 6. I am trying to write a program
to organise cross stitch threads. I have found out how to use a database
table
but all I want to do now is to click a command button to display this access
report.
Any suggestions please ?????
|
by: xzzy |
last post by:
I need to automate a report in a different database (and thank yous to Terry
Kreft for pointing me in the right direction).
below is the code with the one line that does not work, marked: 'Does not
Work'
It appears that the type of object returned from the "AllReports" collection
is not a report object.
=>> I need it to be an object of type report.
|
by: lorirobn |
last post by:
Hello,
I have a report which uses a subreport. When I run the report, I get
"Enter Parameter Value" error message for "tblGuestRoom". I click ok
and the report seems to work fine.
I narrowed down this error to the Link Master Fields property setting,
when I tried the same scenario with form/subform. It gave me error:
'The Link Master fields property setting has produced this error: The
object doesn't contain the Automation object...
|
by: mike_li |
last post by:
On Window 2000 Professional Server
DB2 UDB
Level:
DB2 code release "SQL07029" with level identifie
"030A0105" and informational tokens "DB2 v7.1.0.98", "n040510" and
"WR21337".
In the db2diag.log,
----------------------------------------------------
2005-12-20-10.05.43.278000 Instance:MC Node:000
|
by: rinmanb70 |
last post by:
I have a QBF form/query and a report from the QBF that shows the
results of the QBF. I would like to show the criteria on the report
that was used in the QBF to get the info on report. I can't find how
to do this except to show the "hard for users to understand" SQL WHERE
statement. Anyone have a better way?
| | |
by: Greg |
last post by:
Most suggestions on this topic recommend to use a page footer and make
it visible only on the last page. My problem is that the footer is half
of the height of a page which means the detail would show on only the
top half of each page with whitepace at the bottom of each page.
How can I get the detail to fill each page with my "half page height"
report footer at the bottom of the last page?
Any suggestions to solve this would be...
|
by: Intrepid_Yellow |
last post by:
Hi,
I have the following code that runs my report generator. The user
selects a table from a combo box, then whatever fields they want from a
list box. (This part all works and the report runs fine). There is then
a combo box they can select a field from (eg CompanyID etc) and then
the list box below that contains the values (eg Microsoft, Novell etc).
These are all multi-select list boxes. Now I can get the code to work
if the user...
|
by: Fran |
last post by:
I recently tried to use code for "Use a multi-select list box to
filter a report" from Allen Browne in my database. I was able to add
the code and adapt it to my needs, however I am getting an error.
I click Ok and the report opens.
I look in the design view and the filter is there but the IN equals
"" (it is blank, the values are not in there)
|
by: Gord |
last post by:
When I open a certain report, it runs some code that generates the records
that will be displayed in that report. This works fine. When I go to print
preview the report it appears that the code is run again? This is causing
certain error problems.
1 Why does the code run for a print preview when the report already
exists?
2 What command do I use in code to find out if a report (or any other
object for that matter) is already...
|
by: smithj14 |
last post by:
I have a form to enter start and end dates then select a worker name to filter a report. This all works fine and when the report is open in preview mode it shows the date range in the txtboxes on the report header, but when I print the report the value for these txtboxes are #Name?
Here is the code
Date Range Form:
Private Sub cmdViewErrorReport_Click()
Dim stDocName As String
Dim stDocName2 As String
Dim stWhere As String...
|
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look !
Part I. Meaning of...
| | |
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed.
This is as boiled down as I can make it.
Here is my compilation command:
g++-12 -std=c++20 -Wnarrowing bit_field.cpp
Here is the code in...
|
by: Hystou |
last post by:
Overview:
Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
|
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: conductexam |
last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one.
At the time of converting from word file to html my equations which are in the word document file was convert into image.
Globals.ThisAddIn.Application.ActiveDocument.Select();...
| | |
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
|
by: bsmnconsultancy |
last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...
| |
