473,566 Members | 2,958 Online
Bytes | Software Development & Data Engineering Community
+ Post

Home Posts Topics Members FAQ

AT command for telit gm862 gps in .net micro framework

1 New Member
hello,
I'm doing project smart home assisted living for chronical patient where i'm using meridian/p microcontroller which is controlling temrature sensor(DS1624), accelerometer(L IS302DL)and
a panic button.all data transferring wirelessly from meridian/p to any mobile phone through telit gm862 gps.telit gm862 gps which also have gps function that give the patient actual position outside the house.i have the synchronization code in .net micro framework between meridian/p & telit gm 862 gps.but i failed to send/receive message through the gm862 gps.can anyone help me how can i give AT COMMAND to gm862 gps & how is going to be controlled by meridian/p in .net micro framework.pleas e help me anyone.i will very very grateful.
Aug 25 '10 #1
1 2497
Plater
7,872 Recognized Expert Expert
You probably communicate with the device through a SerialPort or a simulated SerialPort right?
You should be able to send the AT commands using the SerialPort class in .net.
Since MS cancelled it's microframework project, I don't know what you can do in there anymore.
Aug 31 '10 #2

Sign in to post your reply or Sign up for a free account.

Similar topics

8
7065
by: michael830724 | last post by:
Hello everyone : I am doing some work about telit GM862-GPS , i want to have some exemple python code about how to capture ADC .
0
3927
by: zelov | last post by:
Hi, I am creating an interface which contains the listbox(C# .net micro framework). When the listbox item is seletected, it will send a character to the serial port and show a "send command" screen. When receiving the data from serial port, it will show another "receive command" screen. The problem i am facing now is the program not able to...
0
1407
by: eltonyeo | last post by:
hi everyone.. i am new here.. can everyone in the forum guide me along.. thanks.. i am currently doing a project on telit gm862-gps.. i have to use PYTHON to write a software program. kindly anyone teach me or show me how to start off the program.. i need to get started off by writing a program of GPIO1 pin and a program on sending SMSes.. ...
1
3730
by: AAAlansari | last post by:
Hi everyone. I am a new customer here :) ... I hope you can help me.. I am trying to program Telit GM862-GSM GPS modem in order to send SMS. However, I am not sure which software do I have to used to do that? and how simply? Thanks alot
2
2438
by: m.a | last post by:
Hello, Is there any fixed point library in .net framework? I need it to use on fixed point processor that doesn't have any floating point co processor Regards
2
5867
by: Anitaa | last post by:
Hello! I'm new here, both in this forum and with Python, so you'll have to excuse me if my questions are a bit.... well, you know. I'm trying to write a script for Telit module with witch i'll be able to connect to a server and send some data. The module will receive the data from a PIC throught a serial port. I've managed to connect to the...
2
6633
by: EdKing | last post by:
Hi everyone, I'm currently trying to get the simplest "Hello World!" Python script working on a Telit GM862-GPS. I have succeeded in writing to the Telit via the Hyper Terminal and can confirm that the program is enabled. However, I cannot get the Telit to relay "Hello World!" back to the Hyper Terminal, even after trawling through Telit's user...
1
3724
by: yueying53 | last post by:
Hi all, I have a telit EVK2 evaluation kit and a gm862 module. Setup was fine in my school computers and I was even able to write a small program to send and receive sms. However when I brought it to my home computer, it gave warning messages like "The module is not responding. Do you want to retry to connect?" The funny thing is, the...
1
4659
by: wangchengxinyi | last post by:
hello everyone: Is anyone know how to program with telit GM862 GPS in python? i want to program with the telit module, but i have never used it, i even dont know how to download a script, how to set the default script... this my first time work with hardware. Plz give me some guide.
0
1693
by: Vovik | last post by:
I am just getting started with Python. I have Telit GM862-GPS module and trying to install Python IDE to develop gps tracker program in Python that I could run on the module. I have installed Python 2.6 and next installation instruction says I need to get Telit built in libraries ( MDM.py, MOD.py, SER.py and GPIO.py) and file Choice.exe. ...
0
7673
marktang
by: marktang | last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main...
0
7584
by: Hystou | last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it. First, let's disable language...
0
7893
Oralloy
by: Oralloy | last post by:
Hello folks, I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>". The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed. This is as boiled down as I can make it. ...
0
8109
jinu1996
by: jinu1996 | last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that...
1
7645
by: Hystou | last post by:
Overview: Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For...
0
6263
agi2029
by: agi2029 | last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then...
1
5485
isladogs
by: isladogs | last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM). In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules. He will explain when you may want to use classes...
0
5213
by: conductexam | last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one. At the time of converting from word file to html my equations which are in the word document file was convert...
0
926
bsmnconsultancy
by: bsmnconsultancy | last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating...

By using Bytes.com and it's services, you agree to our Privacy Policy and Terms of Use.

To disable or enable advertisements and analytics tracking please visit the manage ads & tracking page.