Hello,
I've tried resolving this issue in a SuSE newsgroup, but after trying
their suggestions and working on this issue for far too long already, I
decided to try this list as it may be a more appropriate discussion area.
I've installed and configured MySQL 4.0.18 on a SuSE 9.1 system using
the default RPM's that came with the distribution.
I created a simple database (one table with InnoDB engine type) and have
tried running some ODBC source against it to test transactions, but I
get the error that the server does not have transactions enabled.
I was directed to enable transactions in the configuration file
(/etc/my.cnf) by uncommenting the lines for innoDb use. However, after
uncommenting these lines and running mysqld from the commandline
(according the online Manual), to generate InnoDB support tables, I get
the following error:
mysqld: ERROR: unknown variable 'innodb_data_ho me_dir=/var/lib/mysql/'
I've tried removing the RPM's and starting from scratch, but cannot get
past this error and successfully test transactions in my unit tests.
Am I missing something?
Thanks,
John
2  3024 
Ysgrifennodd JohnD: Hello,
I've tried resolving this issue in a SuSE newsgroup, but after trying
their suggestions and working on this issue for far too long already, I
decided to try this list as it may be a more appropriate discussion area.
I've installed and configured MySQL 4.0.18 on a SuSE 9.1 system using
the default RPM's that came with the distribution.
I created a simple database (one table with InnoDB engine type) and have
tried running some ODBC source against it to test transactions, but I
get the error that the server does not have transactions enabled.
I was directed to enable transactions in the configuration file
(/etc/my.cnf) by uncommenting the lines for innoDb use. However, after
uncommenting these lines and running mysqld from the commandline
(according the online Manual), to generate InnoDB support tables, I get
the following error:
mysqld: ERROR: unknown variable 'innodb_data_ho me_dir=/var/lib/mysql/'
I've tried removing the RPM's and starting from scratch, but cannot get
past this error and successfully test transactions in my unit tests.
Am I missing something?
Thanks,
John
John,
Did you ever get an answer for this. I have a similar problem
Peter
You've probably discovered this by now, but you need to install the
mysql-max package from YaST to get InnoDB working. Once you've done
that, go to this page for configuration options, which you should add
to /etc/my.cnf http://dev.mysql.com/doc/mysql/en/in...iguration.html
Hope this helps :-) This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics | |
by: Lenz Grimmer |
last post by:
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi,
MySQL 4.0.14, a new version of the popular Open Source/Free Software
Database, has been released. It is now available in source and binary form
for a number of platforms from our download pages at
http://www.mysql.com/downloads/ and mirror sites.
|
by: I.P. |
last post by:
Hi, it's my story.
I have two 4.0.14 mysql server on one machine with win XP Professional
polish version.
First acts as master: on port 3300
Second acts as slave: on port 3301
below my configuration:
|
by: I.P. |
last post by:
No one has replied to my post.
----- Original Message -----
From: "I.P." <jancio_wodnik@wp.pl>
To: <mysql@lists.mysql.com>
Sent: Monday, August 18, 2003 1:01 PM
Subject: mysql 4.0.14 + replication + windows XP PROF
Hi, it's my story.
|
by: JohnD |
last post by:
Hello,
I've tried resolving this issue in a SuSE newsgroup, but after trying
their suggestions and working on this issue for far too long already, I
decided to try this list as it may be a more appropriate discussion area.
I've installed and configured MySQL 4.0.18 on a SuSE 9.1 system using
the default RPM's that came with the distribution.
I created a simple database (one table with InnoDB engine type) and have
|
by: Mairhtin O'Feannag |
last post by:
Hello,
I have a client (customer) who asked the question : "Why would I buy and
use UDB, when MySql is free?"
I had to say I was stunned. I have no experience with MySql, so I was
left sort of stammering and sputtering, and managed to pull out something
I heard a couple of years back - that there was no real transaction
safety in MySql. In flight transactions could be lost.
| | |
by: jlee |
last post by:
I'm pretty much a newbie on mysql, and I need some help.
I am running mysql Ver 12.22 Distrib 4.0.24, for portbld-freebsd5.4
(i386) on a server hosting an active website.
The site's developer uses his own php shopping cart to receive customer
orders.
The configuration was done via cPanel with no external modifications -
which produced no protests when built, ran and connected with no
|
by: maddunr |
last post by:
Hello All,
The other day my server running MySQL 3.23.58 got hacked into and we
are migrating to another one. I backed up my databases using two
methods a) Mysqldump and b) copy the DATA folder on my server.
Now, I am trying to restore these databases on my local machine
(running MySQL 4.0.22-debug and Apache 2.0 on IIS 6.0). I have tried
importing the SQL files (mysqldump) and copying the .frm, .myd and .myi
files into the existing...
|
by: Good Man |
last post by:
Hi there
I've noticed some very weird things happening with my current MySQL setup
on my XP Laptop, a development machine.
For a while, I have been trying to get the MySQL cache to work. Despite
entering the required lines to "my.ini" (the new my.cnf) through notepad
AND MySQL Administrator, the cache does not work.
So, today I took a peek at the 'Health' tab in MySQL Administrator.
|
by: tomzam |
last post by:
I'm trying to get mysql working on Fedora Core 4. Actually trying
to start the program mysqld without fatal errors. I posted this message
first on the linux misc group - but no luck so far. Maybe people on
this group can help me out. Sorry about posting to two groups.
The reference manual for mysql ver 4.1 is huge, it's over 1900 pages!
I've tried all day but now I have to ask for help from people more
experienced then me.
Anyway, this is...
|
by: Chrom_ |
last post by:
Mysql is filling my /var partition because the log limit doesn't seem
to be respected.
I've tried many different settings in /etc/mysql/my.cnf but nothing
works.
Logrotate is not enabled/configured. I just want mysql to use a maximum
of, let's say, 1GB of my /var partition
The log is /var/log/mysql/
|
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look !
Part I. Meaning of...
| | |
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed.
This is as boiled down as I can make it.
Here is my compilation command:
g++-12 -std=c++20 -Wnarrowing bit_field.cpp
Here is the code in...
|
by: jinu1996 |
last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth.
The Art of Business Website Design
Your website is...
|
by: Hystou |
last post by:
Overview:
Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
|
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: conductexam |
last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one.
At the time of converting from word file to html my equations which are in the word document file was convert into image.
Globals.ThisAddIn.Application.ActiveDocument.Select();...
| | |
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
|
by: bsmnconsultancy |
last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...
| |
