I am running a standalone PC (DELL 1,73MHz with 504 MB of RAM) using
Windows XPP Service Pack 2 and BD2 version 8.1 (the freeware
version!).
Right after start of the PC the process db2dasrrm.exe takes all CPU
time. This makes the system extremely slow; to start the Control
Center takes several minutes. Exploring the database, e.g. to open the
table view gives the error SQL 1032N, "No start command of the
database has been given". SQLSTATE=57019. If I try to start the
database I get the error "A Communication problem has occurred at the
DB2 administration server" If I try to start the communication server
by issuing the command C:\DBADMIN START I get "DB2 administration
server is already active"
The system has been used for several months with no problem, this
problem occurred last week.
I would appreciate any suggestion on how to solve this problem.
Note: The message text is translated from Swedish and may not
correspond exactly with the messages on a DB2 server using English.
4  9770 
<ma************ **@foi.sewrote in message
news:11******** **************@ p10g2000cwp.goo glegroups.com.. .
>I am running a standalone PC (DELL 1,73MHz with 504 MB of RAM) using
Windows XPP Service Pack 2 and BD2 version 8.1 (the freeware
version!).
Right after start of the PC the process db2dasrrm.exe takes all CPU
time. This makes the system extremely slow; to start the Control
Center takes several minutes. Exploring the database, e.g. to open the
table view gives the error SQL 1032N, "No start command of the
database has been given". SQLSTATE=57019. If I try to start the
database I get the error "A Communication problem has occurred at the
DB2 administration server" If I try to start the communication server
by issuing the command C:\DBADMIN START I get "DB2 administration
server is already active"
The system has been used for several months with no problem, this
problem occurred last week.
I would appreciate any suggestion on how to solve this problem.
Note: The message text is translated from Swedish and may not
correspond exactly with the messages on a DB2 server using English.
Please do a db2level and post the results.
I don't know what you mean by freeware version, unless you are talking about
DB2 Express-C, but that was first released as release 8.2.
If you have the "try and buy" 8.1 FP 0, then you either need to get DB2
Express-C, or install FP14 on top of your existing try and buy.
On 1 Feb, 19:46, "Mark A" <nob...@nowhere .comwrote:
<matts.gustavs. ..@foi.sewrote in message
news:11******** **************@ p10g2000cwp.goo glegroups.com.. .
I am running a standalone PC (DELL 1,73MHz with 504 MB of RAM) using
Windows XPP Service Pack 2 and BD2 version 8.1 (the freeware
version!).
Right after start of the PC the process db2dasrrm.exe takes all CPU
time. This makes the system extremely slow; to start the Control
Center takes several minutes. Exploring the database, e.g. to open the
table view gives the error SQL 1032N, "No start command of the
database has been given". SQLSTATE=57019. If I try to start the
database I get the error "A Communication problem has occurred at the
DB2 administration server" If I try to start the communication server
by issuing the command C:\DBADMIN START I get "DB2 administration
server is already active"
The system has been used for several months with no problem, this
problem occurred last week.
I would appreciate any suggestion on how to solve this problem.
Note: The message text is translated from Swedish and may not
correspond exactly with the messages on a DB2 server using English.
Please do a db2level and post the results.
I don't know what you mean by freeware version, unless you are talking about
DB2 Express-C, but that was first released as release 8.2.
If you have the "try and buy" 8.1 FP 0, then you either need to get DB2
Express-C, or install FP14 on top of your existing try and buy.- Dölj citerad text -
- Visa citerad text -
The result from db2level is:
DB21085I Instance "DB2" uses "32" bits and DB2 code release
"SQL08024" with
level identifier "03050106".
Informational tokens are "DB2 v8.1.11.973", "s060120", "WR21365", and
FixPak
"11".
Product is installed at "C:\PROGRAM\IBM \SQLLIB".
I have donwloaded DB2 from a IBM site.
/Matts
On 2 Feb, 17:49, matts.gustavs.. .@foi.se wrote:
On 1 Feb, 19:46, "Mark A" <nob...@nowhere .comwrote:
<matts.gustavs. ..@foi.sewrote in message
news:11******** **************@ p10g2000cwp.goo glegroups.com.. .
>I am running a standalone PC (DELL 1,73MHz with 504 MB of RAM) using
Windows XPP Service Pack 2 and BD2 version 8.1 (the freeware
version!).
Right after start of the PC the process db2dasrrm.exe takes allCPU
time. This makes the system extremely slow; to start the Control
Center takes several minutes. Exploring the database, e.g. to open the
table view gives the error SQL 1032N, "No start command of the
database has been given". SQLSTATE=57019. If I try to start the
database I get the error "A Communication problem has occurred at the
>DB2administrat ion server" If I try to start the communication server
by issuing the command C:\DBADMIN START I get "DB2administrat ion
server is already active"
The system has been used for several months with no problem, this
problem occurred last week.
I would appreciate any suggestion on how to solve this problem.
Note: The message text is translated from Swedish and may not
correspond exactly with the messages on aDB2server using English.
Please do a db2level and post the results.
I don't know what you mean by freeware version, unless you are talking about
DB2Express-C, but that was first released as release 8.2.
If you have the "try and buy" 8.1 FP 0, then you either need to getDB2
Express-C, or install FP14 on top of your existing try and buy.- Döljciterad text -
- Visa citerad text -
The result from db2level is:
DB21085I Instance "DB2" uses "32" bits andDB2code release
"SQL08024" with
level identifier "03050106".
Informational tokens are "DB2v8.1.11.973 ", "s060120", "WR21365", and
FixPak
"11".
Product is installed at "C:\PROGRAM\IBM \SQLLIB".
I have donwloadedDB2fr om a IBM site.
/Matts- Dölj citerad text -
- Visa citerad text -
I have now installed FP14 and the result from DB2LEVEL is
DB21085I Instance "DB2" uses "32" bits and DB2 code release
"SQL08027" with
level identifier "03080106".
Informational tokens are "DB2 v8.1.14.292", "s061108", "WR21377", and
FixPak
"14".
Product is installed at "C:\PROGRA~1\IB M\SQLLIB".
The process db2dasrrm.exe still takes all availalble CPU time! However
I can access the database now but the system is slow!
/Matts
On 20 Feb, 08:40, matts.gustavs.. .@foi.se wrote:
On 2 Feb, 17:49,matts.gus tavs...@foi.se wrote:
On 1 Feb, 19:46, "Mark A" <nob...@nowhere .comwrote:
<matts.gustavs. ..@foi.sewrote in message
>news:11******* *************** @p10g2000cwp.go oglegroups.com. ..
I am running a standalone PC (DELL 1,73MHz with 504 MB of RAM) using
Windows XPP Service Pack 2 and BD2 version 8.1 (the freeware
version!).
Right after start of the PC the process db2dasrrm.exe takes allCPU
time. This makes the system extremely slow; to start the Control
Center takes several minutes. Exploring the database, e.g. to open the
table view gives the error SQL 1032N, "No start command of the
database has been given". SQLSTATE=57019. If I try to start the
database I get the error "A Communication problem has occurred at the
DB2administrati on server" If I try to start the communication server
by issuing the command C:\DBADMIN START I get "DB2administrat ion
server is already active"
The system has been used for several months with no problem, this
problem occurred last week.
I would appreciate any suggestion on how to solve this problem.
Note: The message text is translated from Swedish and may not
correspond exactly with the messages on aDB2server using English.
Please do a db2level and post the results.
I don't know what you mean by freeware version, unless you are talking about
>DB2Express-C, but that was first released as release 8.2.
If you have the "try and buy" 8.1 FP 0, then you either need to getDB2
Express-C, or install FP14 on top of your existing try and buy.- Dölj citerad text -
- Visa citerad text -
The result from db2level is:
DB21085I Instance "DB2" uses "32" bits andDB2code release
"SQL08024" with
level identifier "03050106".
Informational tokens are "DB2v8.1.11.973 ", "s060120", "WR21365", and
FixPak
"11".
Product is installed at "C:\PROGRAM\IBM \SQLLIB".
I have donwloadedDB2fr om a IBM site.
/Matts- Dölj citerad text -
- Visa citerad text -
I have now installed FP14 and the result from DB2LEVEL is
DB21085I Instance "DB2" uses "32" bits andDB2code release
"SQL08027" with
level identifier "03080106".
Informational tokens are "DB2v8.1.14.292 ", "s061108", "WR21377", and
FixPak
"14".
Product is installed at "C:\PROGRA~1\IB M\SQLLIB".
The process db2dasrrm.exe still takes all availalbleCPUti me! However
I can access the database now but the system is slow!
/Matts- Dölj citerad text -
- Visa citerad text -
I have now recreated the DAS with the commands
DB2ADMIN STOP
DB2ADMIN DROP
DB2ADMIN CREATE /user=username /password=passwo rd
DB2ADMIN START
and the system works fine! But I do not know why!
/Matts This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics | |
by: Anks |
last post by:
I am using applet to servlet communication for my web based
application.But after running fine for some time apache tomcat server
hangs.I am not able to figure out its cause .the cpu utilization at
that time reaches to 100%.
can anybody tell me about its possible cause.How should i debug this
problem.
please help
thanx
|
by: Anks |
last post by:
hi
I am testing my applet to servlet communication program using
appletviewer.
as soon as i start the applet the cpu utilization reaches to 100%.I am
using apache tomcat 4.1 application server.the os is windows 2000
professional.
the same problem occurs online as more people open there applet
(ultimately it hangs).
|
by: tadpole |
last post by:
This has been the bane of my existence using Visual Studio 2003.
Recipe:
-Use UNC path to browse to directory on Win2003 Server with IIS.
-Double Click the project file, the IDE opens, but notice there is no redraw
in the window in the right panel.
-Wait internibably until impatience forces one to open the Task manager
-Notice that Visual Studio is not (not responding) and can be alt-tabbed to,
but also notice 100% CPU utilization....
|
by: bimalendug |
last post by:
Hi All,
I'm using the .NET performance counters to calculate the network
utilization. But this value exceeds 100%.
In most of the cases, it is very similar to the one shown in the
task-manager. But when I try to measure the network utilization with a
particular utility that sends large data, then the values that I get
exceed 100%. Even in the task-manager it shows similar graph (graph
goes up above the 100% line and disappears and then...
|
by: bill salkin |
last post by:
The simple VB.NET loop:
for i = 1 to 30000000
' do something
next
drives the CPU on my computer to 100% utilization for the
duration of the loop. (Several minutes)
How can I modify this loop to let other (unrelated)
| | |
by: steveberwick |
last post by:
**Using Visual Studio 2005 and Crystal Reports XI Release 2 Developer
Edition.
I currently have a multi-threaded C# application that loads a Crystal
Report at runtime, fills out the necessary parameters and then exports
the file to disk.
I export around 5000 reports a day, in about 3 hours (nightly runs of
the day's transactions), but sometimes, without warning or any debug
info, the application locks-up using 100% of the processor...
|
by: Sam Samson |
last post by:
Hi All,
I wrote a little monitoring app in c# ..
one of the things its supposed to do is report back how much memory the PC
its on is using.
my first pass at this was to iterate through the processes and add up all
the memory they are using ... but I seem to be a little short ... around
100meg or so
|
by: Kaheru |
last post by:
memory utilization increase?
This is because when i try to keep track of the CPU utilization and memory utilization of my FTP server process (ftpserver.exe), the CPU utilization increase, but the memory utilization decrease. Why is this happening?
PS:
CPU Utilization is taken from Process\% Processor Time
Memory Utilization is taken from Process\Working Set (I want to measure the physical memory it uses)
Any help is appreciated....
|
by: Danny Ni |
last post by:
Hi,
I inherited a web project from other programmer. I notice on my dev
machine every time I request a page in IE or FF the CPU jumps to 100%, all
utilized by asp_wp.exe.
I did some researches on the web, somebody suggests this could be due to
database connection not properly disposed. I happened to see the following
code snippet in my web project:
|
by: Imran |
last post by:
Hi
I having a bit of a problem on our Web server, we are facing this issue for
almost more then 5 years now, we have done lot of research on this many
google query and reples most of them refer to infinite look, open loop etc
etc in programming we have check everything no programming issue at all all
pages worksgreat... some time in months some time in week some time more
then 2-4 time in week DLLHOST flakes out and utilize 100% CPU...
|
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look !
Part I. Meaning of...
| | |
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed.
This is as boiled down as I can make it.
Here is my compilation command:
g++-12 -std=c++20 -Wnarrowing bit_field.cpp
Here is the code in...
|
by: Hystou |
last post by:
Overview:
Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
|
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: adsilva |
last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
| | |
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
|
by: bsmnconsultancy |
last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...
| |
