Hi,
We only purchased db2 udb license for AIX platforms. So I have to install
the DB2 UDB Version8.1 tried code on my laptop (Win2k). I haven't used it
for a long time. When I tried to bring the db2 instance up this week, I
found I already past the expiration date. I ran uninstall/reinstall db2 code
a couple of times, but I was always told - no valid license key.
=======
2005-03-11-13.23.19.879000 Instance:DB2 Node:000
PID:2160(db2sys cs.exe) TID:1316 Appid:none
oper system services licRequestAcces s Probe:2
SQL8008N The product "DB2 Enterprise Server Edition" does not have a valid
license key installed and the evaluation period has expired. Functions
specific to this product are not enabled.
=====
C:\IBM\SQLLIB\B IN>db2licm -l
Product Name = "DB2 Enterprise Server Edition"
Product Password = "DB2ESE"
Version Information = "8.1"
Expiry Date = "Expired"
Registered Connect User Policy = "Disabled"
Number Of Entitled Users = "5"
Enforcement Policy = "Soft Stop"
Number of processors = "1"
Number of licensed processors = "1"
Annotation = ""
Other information = ""
===========
I knew sometimes the NT uninstall process might leave some pieces. I checked
the NT Registry Editor, env variables, services, directories, ..., anywhere
I could think of. I also checked with uninstall documentation. No luck -:(
Does any one meet similar scenario? Does anyone have any idea? Dose any one
know if IBM Support supports this kind of problems?
Thanks,
FRX
9  2296 
"Fan Ruo Xin" <fa*****@sbcglo bal.net> wrote in message
news:Pi******** *******@newssvr 19.news.prodigy .com... Hi,
We only purchased db2 udb license for AIX platforms. So I have to install
the DB2 UDB Version8.1 tried code on my laptop (Win2k). I haven't used it
for a long time. When I tried to bring the db2 instance up this week, I
found I already past the expiration date. I ran uninstall/reinstall db2
code a couple of times, but I was always told - no valid license key.
Did you try the Windows Add/Remove programs?
Sounds like you may have a trial version. If you do have a full-blown
version, try using the db2licm command with the -a option against the
license key in your full-blown image.
Larry Edelstein
Fan Ruo Xin wrote: Hi,
We only purchased db2 udb license for AIX platforms. So I have to install
the DB2 UDB Version8.1 tried code on my laptop (Win2k). I haven't used it
for a long time. When I tried to bring the db2 instance up this week, I
found I already past the expiration date. I ran uninstall/reinstall db2 code
a couple of times, but I was always told - no valid license key.
=======
2005-03-11-13.23.19.879000 Instance:DB2 Node:000
PID:2160(db2sys cs.exe) TID:1316 Appid:none
oper system services licRequestAcces s Probe:2
SQL8008N The product "DB2 Enterprise Server Edition" does not have a valid
license key installed and the evaluation period has expired. Functions
specific to this product are not enabled.
=====
C:\IBM\SQLLIB\B IN>db2licm -l
Product Name = "DB2 Enterprise Server Edition"
Product Password = "DB2ESE"
Version Information = "8.1"
Expiry Date = "Expired"
Registered Connect User Policy = "Disabled"
Number Of Entitled Users = "5"
Enforcement Policy = "Soft Stop"
Number of processors = "1"
Number of licensed processors = "1"
Annotation = ""
Other information = ""
===========
I knew sometimes the NT uninstall process might leave some pieces. I checked
the NT Registry Editor, env variables, services, directories, ..., anywhere
I could think of. I also checked with uninstall documentation. No luck -:(
Does any one meet similar scenario? Does anyone have any idea? Dose any one
know if IBM Support supports this kind of problems?
Thanks,
FRX
"Mark A" <no****@nowhere .com> wrote in message
news:Nu******** ************@co mcast.com...
"Fan Ruo Xin" <fa*****@sbcglo bal.net> wrote in message
news:Pi******** *******@newssvr 19.news.prodigy .com... Hi,
We only purchased db2 udb license for AIX platforms. So I have to
install the DB2 UDB Version8.1 tried code on my laptop (Win2k). I haven't used
it for a long time. When I tried to bring the db2 instance up this week, I
found I already past the expiration date. I ran uninstall/reinstall db2 code a couple of times, but I was always told - no valid license key.
Did you try the Windows Add/Remove programs?
I did remove first, then reboot.
Thanks,
"Larry" <la***@nospam.n et> wrote in message
news:kJ******** ***********@fe1 1.lga... Sounds like you may have a trial version. If you do have a full-blown
version, try using the db2licm command with the -a option against the
license key in your full-blown image.
Yes, I have to use a trial version untill we signed ESL with IBM. Right we
only have db2 license on AIX platform.
Thanks,
Larry Edelstein
Fan Ruo Xin wrote:
Hi,
We only purchased db2 udb license for AIX platforms. So I have to
install the DB2 UDB Version8.1 tried code on my laptop (Win2k). I haven't used
it for a long time. When I tried to bring the db2 instance up this week, I
found I already past the expiration date. I ran uninstall/reinstall db2
code a couple of times, but I was always told - no valid license key.
=======
2005-03-11-13.23.19.879000 Instance:DB2 Node:000
PID:2160(db2sys cs.exe) TID:1316 Appid:none
oper system services licRequestAcces s Probe:2
SQL8008N The product "DB2 Enterprise Server Edition" does not have a
valid license key installed and the evaluation period has expired. Functions
specific to this product are not enabled.
=====
C:\IBM\SQLLIB\B IN>db2licm -l
Product Name = "DB2 Enterprise Server Edition"
Product Password = "DB2ESE"
Version Information = "8.1"
Expiry Date = "Expired"
Registered Connect User Policy = "Disabled"
Number Of Entitled Users = "5"
Enforcement Policy = "Soft Stop"
Number of processors = "1"
Number of licensed processors = "1"
Annotation = ""
Other information = ""
===========
I knew sometimes the NT uninstall process might leave some pieces. I
checked the NT Registry Editor, env variables, services, directories, ...,
anywhere I could think of. I also checked with uninstall documentation. No
luck -:(
Does any one meet similar scenario? Does anyone have any idea? Dose any
one know if IBM Support supports this kind of problems?
Thanks,
FRX
Fan Ruo Xin wrote: I knew sometimes the NT uninstall process might leave some pieces. I
checked the NT Registry Editor, env variables, services, directories, ...,
anywhere I could think of. I also checked with uninstall documentation. No
luck -:(
Does any one meet similar scenario? Does anyone have any idea? Dose any
one know if IBM Support supports this kind of problems?
Complete uninstall info for Windows is here: http://www-1.ibm.com/support/docview...f-8&lang=en+en
If that still doesn't help, let us know.
Thanks,
"Darin McBride" <dm******@naboo .to.org.no.spam .for.me> wrote in message
news:VvQYd.6598 68$8l.71276@pd7 tw1no... Fan Ruo Xin wrote:
I knew sometimes the NT uninstall process might leave some pieces. I
checked the NT Registry Editor, env variables, services, directories,
...., anywhere I could think of. I also checked with uninstall documentation.
No luck -:(
Does any one meet similar scenario? Does anyone have any idea? Dose any
one know if IBM Support supports this kind of problems?
Complete uninstall info for Windows is here:
http://www-1.ibm.com/support/docview...f-8&lang=en+en
If that still doesn't help, let us know.
Thanks,
After I removed the db2 trial code, and with reboot, with the help from an
NT expert. When none of them can help with my situation, I called one of my
friends and he sent me the above link. I followed the each step from the
documentation. But after reinstalled trial code, still got "Expired"
message. I drop/recreate the instance, could not get away this message
either.
Thanks,
FRX
"Fan Ruo Xin" <fa*****@sbcglo bal.net> wrote in message news:_i8Zd.4776 After I removed the db2 trial code, and with reboot, with the help from an
NT expert. When none of them can help with my situation, I called one of
my friends and he sent me the above link. I followed the each step from the
documentation. But after reinstalled trial code, still got "Expired"
message. I drop/recreate the instance, could not get away this message
either.
Thanks,
FRX
Almost all software vendors design their trial code on Windows so that you
cannot uninstall and reinstall after the first trial period is over to get
around the expiration of the trial period.
They do this by storing hidden files or registry entries that know you have
previously run the trial software. Sometimes you can get around this by
editing the Windows registry to remove all references to DB2. Or there may
be other hidden files that you can search for on your system where DB2 keeps
track of your previous trial install date.
"Mark A" <no****@nowhere .com> wrote in message
news:Od******** ************@co mcast.com... "Fan Ruo Xin" <fa*****@sbcglo bal.net> wrote in message news:_i8Zd.4776 After I removed the db2 trial code, and with reboot, with the help from
an NT expert. When none of them can help with my situation, I called one of my friends and he sent me the above link. I followed the each step from the
documentation. But after reinstalled trial code, still got "Expired"
message. I drop/recreate the instance, could not get away this message
either.
Thanks,
FRX
Almost all software vendors design their trial code on Windows so that you
cannot uninstall and reinstall after the first trial period is over to get
around the expiration of the trial period.
They do this by storing hidden files or registry entries that know you
have previously run the trial software. Sometimes you can get around this by
editing the Windows registry to remove all references to DB2. Or there may
be other hidden files that you can search for on your system where DB2
keeps track of your previous trial install date.
Thank you, Mark. I was thinking the same thing, maybe when a trial code keep
installing on the same server, the number of installation times will be
saved somewhere. But I ever installed db2 udb version7.2 trial code on the
linux a couple of times, never met this problem before. The difference
between windows and unix/linux, is we can trust the remove procedure, which
can clean the software code totally on Linux or unix platform.
I never heard Oracle would keep track of the installation of trial code
either.
Actualy when you uninstall (using the uninstall script), on Linux, not
ALL is removed. You still have to remove an entry that is made in
/etc/services and remove the /var/db2 folder.
Just my 2 cents
Christos
Fan Ruo Xin wrote: "Mark A" <no****@nowhere .com> wrote in message
news:Od******** ************@co mcast.com...
"Fan Ruo Xin" <fa*****@sbcglo bal.net> wrote in message news:_i8Zd.4776
After I removed the db2 trial code, and with reboot, with the help from
an
NT expert. When none of them can help with my situation, I called one of
my
friends and he sent me the above link. I followed the each step from the
documentatio n. But after reinstalled trial code, still got "Expired"
message. I drop/recreate the instance, could not get away this message
either.
Thanks,
FRX
Almost all software vendors design their trial code on Windows so that you
cannot uninstall and reinstall after the first trial period is over to get
around the expiration of the trial period.
They do this by storing hidden files or registry entries that know you
have
previously run the trial software. Sometimes you can get around this by
editing the Windows registry to remove all references to DB2. Or there may
be other hidden files that you can search for on your system where DB2
keeps
track of your previous trial install date.
Thank you, Mark. I was thinking the same thing, maybe when a trial code keep
installing on the same server, the number of installation times will be
saved somewhere. But I ever installed db2 udb version7.2 trial code on the
linux a couple of times, never met this problem before. The difference
between windows and unix/linux, is we can trust the remove procedure, which
can clean the software code totally on Linux or unix platform.
I never heard Oracle would keep track of the installation of trial code
either.
This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics | |
by: Dave A |
last post by:
I have an application that runs in the system tray (taskbar notification
area) and it runs at startup. Occasionally I need to release a new version.
I have created a deployment project in .Net. With the MSI it detects
whether a current version is installed and requests that the user uninstalls
it prior to installing the new version. Also, MSI detects a running instance
of the application during the uninstall and requests that it be closed...
|
by: tuuky |
last post by:
I've created a Windows Service in C# and an installer project for it.
I installed the service using the packaged installer project and the service
was installed correctly and it runs fine.
I've since made some changes to this service.
I then proceded to uninstall it (Add/Remove Programs) to install the new one.
However, the service still shows under Services, but the .exe is gone.
I can't install the new version of the service,...
|
by: Robert |
last post by:
We have several serviced components written in .NET 1.1. Using Visual
Studio, we have an installer project that creates an installer for them.
The components are installed properly into the GAC and show in the Component
Services control panel.
The issue is when we uninstall or want to upgrade the components. What we
have found is if there are live instances pooled and running (which is always
the case as we want them to be ready for...
|
by: Fan Ruo Xin |
last post by:
I installed Stinger in my PC (w2k). I need to do a quick compare between DB2
OLAP server and DB2 Cube Views. And I only found DB2 Cube Views version8.1
trial code from IBM website. I didn't want to spend a lot of time on this.
So I installed the Cube Views 8.1, without uninstall ESE V8.2 code first
last Friday. It looks like everything was OK.
But I failed to start DB2 Information Center and DB2 CC today. I've seen
process - javaw used...
|
by: Adam Clauss |
last post by:
I am needing to automate some installation tasks. I first need to determine
if there is already a version of a program installed. The program appears
in the Add/Remove Programs in control panel, and I know this is all stored
in the registry. But short of searching through the entire registry, I
cannot figure out how to locate the program.
I see that in the registry (for .msi) installs, stores something like:...
| | |
by: johnbdh |
last post by:
Due to real ds mistake on my part IIS was inadvertently uninstalled on my web server.
After reinstalling IIS, I have been able to get everything back up except ASP.net.
Any page served using ASP.net returns the generic Runtime Error page....
Server Error in '/Qmcfm' Application.
------------------------------------------------------------------------
Runtime Error
|
by: VJ |
last post by:
I am deploying a Package having applications developed using VB.NET and
VS.NET 2003. I am using the Packaging feature provided with the
VisualStudio. I can use the package to creates shortcuts for all my
application executables. Now to Uninstall this package I have to make the
user go to Add/Remove programs everytime. The users are requesting that if
they can have a uninstall option as part of the application menus... How do
I provide...
|
by: WWengert |
last post by:
I am developing a Windows application using VS2005 Pro (VB). The solution
includes a setup project. I sent the setup files to a tester and he installed
and used the program successfully. I then sent him a new install package with
some updates but after he did the uninstall via Add/Remove Programs and then
runs the new install package it complains that the program is already
installed? How can I completely uninstall the previous version.
...
|
by: Luke |
last post by:
Hey all,
i'm currently working on a project for our IT group. what this
program
does is lists all the installed programs on the remote machine for
the
admin. what i'm trying to add is functionality for the admin to
select
a program from the list and click an uninstall button on the program
to uninstall the program remotely. We are rebuilding this program
|
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look !
Part I. Meaning of...
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
| | |
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed.
This is as boiled down as I can make it.
Here is my compilation command:
g++-12 -std=c++20 -Wnarrowing bit_field.cpp
Here is the code in...
|
by: jinu1996 |
last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth.
The Art of Business Website Design
Your website is...
|
by: Hystou |
last post by:
Overview:
Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: adsilva |
last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
| | |
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
| |
