Hi everyone,
According to the fixpak Readme, you can uninstall a Fixpak on UNIX (AIX
to be precise), by doing a rollback...and all the other things described
in the readme.
My question is, do I have to restore a backup of the DB from the old
fixpak level, or is the DB not affected and all I simply have to do is
rebind the original Fixpak level's packages?
Thank you,
Christos Kalantzis 2 3497
Christos Kalantzis wrote: Hi everyone,
According to the fixpak Readme, you can uninstall a Fixpak on UNIX (AIX to be precise), by doing a rollback...and all the other things described in the readme.
My question is, do I have to restore a backup of the DB from the old fixpak level, or is the DB not affected and all I simply have to do is rebind the original Fixpak level's packages?
Thank you,
Christos Kalantzis
Hi Christos,
It depends. If you picked up any new function provided by a fixpack then
you would need to either restore from a backup or drop the relevant objects.
An example would have been customers who altered IDENTITY columns in
V7.2 could not go back to V7.1.2 unless they dropped the respective
tables since DB2 could not digest the catalog changes.
If all you did was install a fixpack without exploiting any new DDL
features you can go back.
Cheers
Serge
--
Serge Rielau
DB2 SQL Compiler Development
IBM Toronto Lab
I believe you'll have to apply the image you had taken prior to the
application of the fixoack.
The other issue you may encounter is that changes may have been made to
catalog tables when you applied the fixpack and they could be
incompatible with your original fixpack code if you don't restore your
image.
I'd restore if I were you unless you are looking at several hours of
work abnd even then...
HTH' Pierre.
PS: Say Hi! to Eric.
Christos Kalantzis wrote: Hi everyone,
According to the fixpak Readme, you can uninstall a Fixpak on UNIX (AIX to be precise), by doing a rollback...and all the other things described in the readme.
My question is, do I have to restore a backup of the DB from the old fixpak level, or is the DB not affected and all I simply have to do is rebind the original Fixpak level's packages?
Thank you,
Christos Kalantzis
--
Pierre Saint-Jacques - Reply to: sescons at attglobal dot net
IBM DB2 Cerified Solutions Expert - Administration
SES Consultants Inc. This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics |
by: Carl Castrianni |
last post by:
I have UDB ESE fixpak 2 installed on a Windows XP Pro machine. I
downloaded ESE fixpak 3 (and fixpak 4) from the IBM Web site. When I
run the fixpak 3 installer (or the fixpak 4 installer for that matter)
I get the following error: "This patch package could not be opened.
Verify that the patch package exists and that you can access it or
contact the vendor". I know the 500 meg fixpak file is valid because
it installed correctly on...
|
by: Mary Lei |
last post by:
I have problems connecting to ftp server to
obtain the solaris fixpak to upgrade to DB2 8.2.1
ftp://ftp.software.ibm.com/ps/products/db2/fixes/english-us/db2sunv8/fixpak/FP8_U800664/FP5_U800664.tar
wget
ftp://ftp.software.ibm.com/ps/products/db2/fixes/english-us/db2sunv8/fixpak/FP8_U800664/FP5_U800664.tar
--13:18:25--
ftp://ftp.software.ibm.com/ps/products/db2/fixes/english-us/db2sunv8/fixpak/FP8_U800664/FP5_U800664.tar
=>...
|
by: Peter Sands |
last post by:
Hi,
I wish to install fixpak 11 on 8.1, On the machine we have 3
instances, but I only want to upgrade to fixpak 11 on one instance for
the time being. Can this be done? Or will installing the filesets
effect all instances even if I do not do a db2iupdate on all of them.
aix 5.2
db2 8.1 fixpak 4
thanks
|
by: mike_li |
last post by:
We are considering to update from V8.1 Fixpak 8 to Fixpak 9.
The environment is:
AIX: 5.2
"DB2 v8.1.1.80", "special_13100", "U800400_13100", FixPak "8" 64
bits.
With DPF: 4 nodes with 16 partitions.
With 4 instances.
My concern: do i need to install Fixpak binary code on four nodes
individually?
|
by: mike_li |
last post by:
We are considering to update from V8.1 Fixpak 8 to Fixpak 9.
Operating System Information:
OSName: AIX
NodeName: mdxxx01, mdxxx02, mdxxx03, mdxxx04
Version: 5
Release: 2
64 bits and DB2 code release SQL08021 with level identifier 03020106
Informational tokens are DB2 v8.1.1.80, special_13100, U800400_13100,
| |
by: jsorianop |
last post by:
--------------------------------------------------------------------------------
I have HP-UX ia64 and db2 version 8.1 fp 6, i want to upgrade to 8.1
fixpak 11, but when i tried to install it, i received the message that
my db2 version should be at least 8.2 . I think that i need to apply
tha fixpak 7 before the fp 11, but the fixpak 7 isnt available on the
IBM page.
Somebody knows how can i get the last release?
|
by: Christopher Keller |
last post by:
Hello,
does anyone know why on the IBM download section of the UDB Support page
http://www-306.ibm.com/software/data/db2/udb/support/
FP 13, 11 and 10 are listed prominently, but not FP12.
We tried fixpak 11, found you couldn't uninstall it with Windows installer(that
was great), this was fixed in 12.
We are now in the final stages in the process of deploying FP12 for DB2 Connect
|
by: aj |
last post by:
I'm currently on DB2 LUW v8.1 fixpack 5
DB21085I Instance "xxxx" uses "32" bits and DB2 code
release "SQL08015" with level identifier "02060106".
Informational tokens are "DB2 v8.1.0.48", "s040212", "MI00069",
and FixPak "5". Product is installed at "/opt/IBM/db2/V8.1".
I wish to upgrade to v8.1 fixpak 14 (aka v8.2 fixpak 7), the
Linux 2.4 kernel version.
Can I do this directly? Or do I have to goto v8.1 fixpak 7
|
by: aj |
last post by:
DB2 LUW 8.2 FP14 Red Hat AS 2.1
I am using a response file w/ db2setup to install DB2.
I then want to install the latest fixpak in the same
automated way.
Is there any way to use a response file w/ fixpak
installation? Or can I otherwise do an automated
(non-interactive) fixpak install?
|
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look !
Part I. Meaning of...
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
| |
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed.
This is as boiled down as I can make it.
Here is my compilation command:
g++-12 -std=c++20 -Wnarrowing bit_field.cpp
Here is the code in...
|
by: jinu1996 |
last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth.
The Art of Business Website Design
Your website is...
|
by: Hystou |
last post by:
Overview:
Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: conductexam |
last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one.
At the time of converting from word file to html my equations which are in the word document file was convert into image.
Globals.ThisAddIn.Application.ActiveDocument.Select();...
|
by: adsilva |
last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
| |
by: bsmnconsultancy |
last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...
| |