Hello
I use DB2 UDB V8.1.5. Using embedded SQL (SQLJava), I insert a row
into a table which has some foreign keys and check constraints. The
insert works fine, but if I encapsulate the insert into a SELECT INTO
.... FROM FINAL TABLE and then try to _precompile_ it, I get the
following:
SQL0545N (invalidates check constraint). If I try to put DEFAULT for
the column which the ck_constraint applies on, i get SQL0530N (invalid
foreign key) on another column.
I'd like to use the INSERT statement nested in a SELECT statement to
retrieve the generated primary key.
The failing statement looks like this: SELECT id
INTO :id
FROM FINAL TABLE ( INSERT INTO mytable(id, val)
VALUES (DEFAULT, :inputhostvar)
)
Thanks for your advice. 3  2656 
Can't say much without knowing more of the schema (triggers RI, check
constraints).
Try using NEW TABLE instead of FINAL TABLE.
FINAL TABLE is more restrictive than NEW TABLE sinc eit will not accept
anything that could possible change the table after the initial insert.
If you can come up with a repro script I'll gladly take a closer look.
Cheers
Serge
--
Serge Rielau
DB2 SQL Compiler Development
IBM Toronto Lab
> Try using NEW TABLE instead of FINAL TABLE. FINAL TABLE is more restrictive than NEW TABLE sinc eit will not accept
anything that could possible change the table after the initial insert.
I've already tried that but no success. I'v noticed a very strange
thing though: The precompile fails, because it actually inserts a row
into the table! It uses the default values (mostly 0) for the columns,
and that's also the reason why it failed the precompile when i had RI
enabled (the 0 doesn't occur in the parent table). So why does the
SELECT x INTO :x FROM FINAL TABLE ...
construct insert a row? Somewhat scary.
Hmm, I have a very hard time imagining how this would happen, but
nothing is impossible.
It would mean that DB2 half way through compiling the statement decides
to switch into EXECUTE IMMEDIATE mode.
Just for sanities sake: You state you get a -545. I presume you
validated that the constraint specified is indeed related to the target
table. (and not some other object, which soemhow is not happy during
precompilation) .
I think the degree of spookyness here is beyond what is likley to be
solved in this newsgroup. You may want to consider calling support.
Have a db2trc handy. That'll be the telltale for what's happening :-)
Cheers
Serge
--
Serge Rielau
DB2 SQL Compiler Development
IBM Toronto Lab
This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics | |
by: Howard Hinnant |
last post by:
I recently asked for a survey of multimap insert with hint behavior, in
support of a paper I'm writing concerning lwg issue 233. My sincere
thanks to Beman Dawes, Raoul Gough, Russell Hind, Bronek Kozicki, Nicola
Musatti, John Potter and Maxim Yegorushkin for helping with that survey.
Since I started work on this paper at least two people I respect very
much have expressed interest in nailing down the "insert without hint"
function a...
|
by: Mark P |
last post by:
Some time ago I posted here about inserting into a set with a hint:
http://groups-beta.google.com/group/alt.comp.lang.learn.c-c++/browse_thread/thread/fb75b00f73e979db/018b8d0eadb38dbf?q=%22STL+insert+with+hint%22+%22Mark+P%22&rnum=1&hl=en#018b8d0eadb38dbf
I quoted the SGI STL docs describing a.insert(p, t), where p is the hint
iterator and t is the inserted object:
"Insert with hint is logarithmic in general, but it is amortized...
|
by: serge |
last post by:
I have a scenario where two tables are in a One-to-Many relationship
and I need to move the data from the Many table to the One table so
that it becomes a One-to-One relationship.
I need to salvage the records from the many table and without going
into detail, one of the reasons I can't do the opposite as
there are records in the ONE table that I need to keep even if they
don't have any child records in the MANY table.
Below I created...
|
by: Ford Desperado |
last post by:
I've been reading the docs and playing around, but I'm still not
getting the difference. For instance,
create table a(i int check(i>0))
create table a_src(i int)
go
create unique index ai on a(i) with IGNORE_DUP_KEY
go
insert into a_src values(1)
insert into a_src values(1)
|
by: Jean-Christian Imbeault |
last post by:
I have a table with a primary field and a few other fields. What is the
fastest way to do an insert into that table assuming that sometimes I
might try to insert a record with a duplicate primary key and want that
to fail?
I know that if I try a plain insert this will work, but in the case
where I am trying to insert a duplicate key, the insert fails (as it
should) and an error is logged.
I could first do a check to see if there is...
| | |
by: Chris Kratz |
last post by:
Hello all,
We have run into what appears to be a problem with rules and subselects in
postgres 7.4.1. We have boiled it down to the following test case. If
anyone has any thoughts as to why this would be happening, we would
appreciate feedback.
We have tested on 7.3.4, 7.3.6 and 7.4.1 and all exhibit the same behavior.
Test case one tries to populate table2 from table1 with records that are not
in table2 already. Table2 gets...
|
by: Mark Harrison |
last post by:
So I have some data that I want to put into a table. If the
row already exists (as defined by the primary key), I would
like to update the row. Otherwise, I would like to insert
the row.
I've been doing something like
delete from foo where name = 'xx';
insert into foo values('xx',1,2,...);
|
by: MP |
last post by:
Hi
Posted this several hours ago to another ng but it never showed up thought
i'd try here.
using vb6, ado, .mdb, jet4.0, no access
given table tblJob with field JobNumber text(10)
'The example I had to go by
'INSERT INTO tblCustomers (CustomerID, , )
|
by: Steven Blair |
last post by:
Hi,
Would be grateful if anyone with a high understanding of the
SqlDataSource and FormView could have a look at my example and my
problems.
This has really been puzzling me for some time, and would like and
expert just to confirm what I am doing is the best approach.
Application example:
|
by: abhi81 |
last post by:
Hello All,
I have a table on which I have created a insert,Update and a Delete trigger. All these triggers write a entry to another audit table with the unique key for each table and the timestamp.
Insert and Update trigger work fine when i have only one of them defined.
However when I have all the 3 triggers in place and when i try to fire a insert query on the statement. It triggers both insert and update trigger at the same time and...
|
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look !
Part I. Meaning of...
| | |
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed.
This is as boiled down as I can make it.
Here is my compilation command:
g++-12 -std=c++20 -Wnarrowing bit_field.cpp
Here is the code in...
|
by: jinu1996 |
last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth.
The Art of Business Website Design
Your website is...
|
by: Hystou |
last post by:
Overview:
Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
|
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: conductexam |
last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one.
At the time of converting from word file to html my equations which are in the word document file was convert into image.
Globals.ThisAddIn.Application.ActiveDocument.Select();...
| | |
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
|
by: bsmnconsultancy |
last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...
| |
