473,836 Members | 1,987 Online
Bytes | Software Development & Data Engineering Community
+ Post

Home Posts Topics Members FAQ

CS0236: Field initializer cannot refer to field xyz

class Test
{
IList list = new ArrayList();
MyCollection list2 = new MyCollection (list);
}

Leads to this error. I know I could initialize them in the ctor but I'm
asking myself where this restriction come from. Aren't the initializers
called in a well defined order or what is the problem here?
Jul 28 '06 #1
2 3181
C# specification, section 10.4.5.2:

"
A variable initializer for an instance field cannot reference the instance
being created. Thus, it is a compile-time error to reference this in a
variable initializer, as it is a compile-time error for a variable
initializer to reference any instance member through a simple-name.
"

Your code MyCollection list2 = new MyCollection (list); would be compiled as
MyCollection this.list2 = new MyCollection (this.list); and it is not
allowed to use this. in the field initialization.
(in a way, there is not yet a this because it is being constructed).

"cody" <de********@gmx .deha scritto nel messaggio
news:%2******** ********@TK2MSF TNGP03.phx.gbl. ..
class Test
{ IList list = new ArrayList();
MyCollection list2 = new MyCollection (list);
}

Leads to this error. I know I could initialize them in the ctor but I'm
asking myself where this restriction come from. Aren't the initializers
called in a well defined order or what is the problem here?

Jul 28 '06 #2
Laura T wrote:
C# specification, section 10.4.5.2:

"
A variable initializer for an instance field cannot reference the instance
being created. Thus, it is a compile-time error to reference this in a
variable initializer, as it is a compile-time error for a variable
initializer to reference any instance member through a simple-name.
"

Your code MyCollection list2 = new MyCollection (list); would be compiled as
MyCollection this.list2 = new MyCollection (this.list); and it is not
allowed to use this. in the field initialization.
(in a way, there is not yet a this because it is being constructed).

"cody" <de********@gmx .deha scritto nel messaggio
news:%2******** ********@TK2MSF TNGP03.phx.gbl. ..
>class Test
{ IList list = new ArrayList();
MyCollection list2 = new MyCollection (list);
}

Leads to this error. I know I could initialize them in the ctor but I'm
asking myself where this restriction come from. Aren't the initializers
called in a well defined order or what is the problem here?
Well, this sounds logical at the first glimpse. I would also disallow
calling of instance methods or properties here because you never know
what these methods do internally.
But for bare naked fields the compiler could make an exception (no pun
intended)?
Jul 28 '06 #3

This thread has been closed and replies have been disabled. Please start a new discussion.

Similar topics

20
10172
by: | last post by:
If I need to check if a certain value does exist in a field, and return either "yes" or "not" which query would be the most effestive?
1
2496
by: Chris K | last post by:
I am relatively new to C++ and hope that this question is relevant. I have spent some time at the local library and some time on dejanews, but have no decided to go ahead with my question, since I found no satisfactory answer yet. It is about composed/aggregated classes. I am developing a scientific code (Monte Carlo) in which I find it natural to have classes with several levels of aggregation.
3
2824
by: Dave | last post by:
Hi everyone, Is it possible, using an Attribute or by some other means, to notify the C# Compiler to serialize all static field's that have initializers before code in an explicit static constructor? Example: public class MyClass {
4
10213
by: TS | last post by:
I am trying to create a page template. I am trying to set the value of a field to the return value from a method. What do I have to do to get m_form set to the value returned from a method? (the compiler won't let me do this:) // Form in the page public HtmlForm m_form = FindFormTag(); public HtmlForm FindFormTag() {
9
2375
by: Player | last post by:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello all. I am in the process of teaching myself C# and I think I am doing OK. I have learnt how to how to call the right constructor of a class, if the class has more than than one cosntructor, by making sure that each constructor has a different signature. I have managed to learn that and get
2
5523
by: donnet | last post by:
Inside my .aspx file, I have a textbox populated with data from a dataset like this: <asp:TextBox text='<%# DataBinder.Eval(Container.DataItem, "Comment")%>' id="CommentText" runat="server" TextMode="MultiLine"></asp:TextBox> </ItemTemplate> </asp:datalist> <asp:button id="EditCommentButton" Text="Edit Comment" Runat="server"></asp:button
5
2296
by: Wu | last post by:
Hi there, I was wondering whether there is a way to use array initializer syntax to initialize a non-static array member in a class in C++. In particular, if I have a class Foo: class Foo { double arr; }
1
2379
by: Lighter | last post by:
On page 163 of In the C++ standard document(9.6 Bit-fields), I find three rules on bit-fields: Rule 1, "A bit-field shall not be a static member." Rule 2, "A non-const reference shall not be bount to a bit-field" Rule 3, "Note: if the initializer for a reference of type const T& is an lvalue that refers to a bit-field, the reference is bound to a temporary initialized to hold the value of the bit-field; the reference
2
1796
by: sconard | last post by:
I cannot seem to refer to a derived field in criteria. Better phrased: I cannot refer to a derived field in the where clause of the query. The following does not use the value from the derived field and causes access to pop a message box to fill the value for endDate. I have tried the name of the query .endDate and this also fails. I have tried quotes "endDate" and this also fails. I have also tried: !, , endDate. I am running the query...
0
9820
marktang
by: marktang | last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look ! Part I. Meaning of...
0
9670
by: Hystou | last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it. First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
0
10844
Oralloy
by: Oralloy | last post by:
Hello folks, I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>". The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed. This is as boiled down as I can make it. Here is my compilation command: g++-12 -std=c++20 -Wnarrowing bit_field.cpp Here is the code in...
0
10548
jinu1996
by: jinu1996 | last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth. The Art of Business Website Design Your website is...
0
9374
agi2029
by: agi2029 | last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own.... Now, this would greatly impact the work of software developers. The idea...
1
7792
isladogs
by: isladogs | last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM). In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules. He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms. Adolph will...
0
6979
by: conductexam | last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one. At the time of converting from word file to html my equations which are in the word document file was convert into image. Globals.ThisAddIn.Application.ActiveDocument.Select();...
0
5649
by: TSSRALBI | last post by:
Hello I'm a network technician in training and I need your help. I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs. The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols. I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
1
4452
by: 6302768590 | last post by:
Hai team i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system

By using Bytes.com and it's services, you agree to our Privacy Policy and Terms of Use.

To disable or enable advertisements and analytics tracking please visit the manage ads & tracking page.