My win-form have many numericupdown controls to applied. But numericupdown
control don't like textbox, text box control can automatic selected text
when got focus. Is there any method can let me set all numericupdown
autoselect text when gotfocus? 3 30173
Hi ABC, My win-form have many numericupdown controls to applied. But numericupdown control don't like textbox, text box control can automatic selected text when got focus. Is there any method can let me set all numericupdown autoselect text when gotfocus?
I'm not exactly sure if I understood you 100% clearly, but I assume you want
to have a NumericUpDown to select the whole value (text) when one tabs into
the control, like the TextBox control would function.
The NumericUpDown control has an (overloaded) method called Select, to which
you can pass in two integers: the index of the first character to be
selected, and then the number of characters to select. To select all text,
you would start from index zero, and the length would then be the number of
characters in the value.
If you call the Select method in the Enter event of the NumericUpDown
control for example like this, you should be able to emulate the TextBox
functionality:
-----------------------------
private void numericUpDown1_ Enter(object sender, EventArgs e)
{
numericUpDown1. Select(0, numericUpDown1. ToString().Leng th);
}
-----------------------------
Note that the NumericUpDown control doesn't have a Text property, since the
Value property is used instead. Also, if you know that there will be, say,
maximum of three numbers in the value (maximum integer value 999), you could
also always call Select(0,3). It doesn't hurt if there are less than three
numbers in the value currently.
Hope this helps! Merry Christmas as well!
--
Regards,
Mr. Jani Järvinen
C# MVP
Helsinki, Finland ja***@removethi s.dystopia.fi http://www.saunalahti.fi/janij/
Yes, you right, but there are many numericupdown controls (over 300), is
there any good method?
"Jani Järvinen [MVP]" <ja***@removeth is.dystopia.fi> ¼¶¼g©ó¶l¥ó·s»D: Oy************* *@TK2MSFTNGP14. phx.gbl... Hi ABC,
My win-form have many numericupdown controls to applied. But numericupdown control don't like textbox, text box control can automatic selected text when got focus. Is there any method can let me set all numericupdown autoselect text when gotfocus?
I'm not exactly sure if I understood you 100% clearly, but I assume you want to have a NumericUpDown to select the whole value (text) when one tabs into the control, like the TextBox control would function.
The NumericUpDown control has an (overloaded) method called Select, to which you can pass in two integers: the index of the first character to be selected, and then the number of characters to select. To select all text, you would start from index zero, and the length would then be the number of characters in the value.
If you call the Select method in the Enter event of the NumericUpDown control for example like this, you should be able to emulate the TextBox functionality:
----------------------------- private void numericUpDown1_ Enter(object sender, EventArgs e) { numericUpDown1. Select(0, numericUpDown1. ToString().Leng th); } -----------------------------
Note that the NumericUpDown control doesn't have a Text property, since the Value property is used instead. Also, if you know that there will be, say, maximum of three numbers in the value (maximum integer value 999), you could also always call Select(0,3). It doesn't hurt if there are less than three numbers in the value currently.
Hope this helps! Merry Christmas as well!
-- Regards,
Mr. Jani Järvinen C# MVP Helsinki, Finland ja***@removethi s.dystopia.fi http://www.saunalahti.fi/janij/
Hello! Yes, you right, but there are many numericupdown controls (over 300), is there any good method?
Good question. The easiest way to solve this issue is to point all the Enter
event handlers of those NumericUpDown's to a single event handler.
That is, if you are in Visual Studio, you can double-click an event in the
Properties window to create an event handler for the selected control. In
all other NumericUpDown controls, you would not double-click the value
column in the Properties window, but instead select an existing event
handler from the list.
In code, this would look like the following:
------------------------
numericUpDown1. Enter += new System.EventHan dler(numericUpD own1_Enter);
numericUpDown2. Enter += new System.EventHan dler(numericUpD own1_Enter);
------------------------
Note how both Enter event handlers now point to the same code, i.e. the
numericUpDown1_ Enter method.
The next question is obviously how to be able to determine which
NumericUpDown is in question. You can use code similar to the following:
------------------------
private void numericUpDown1_ Enter(object sender, EventArgs e)
{
(sender as NumericUpDown). Select(0, 10);
}
------------------------
As I said, this is probably the easiest solution, but not the most elegant
one. If you have 300 controls (hopefully not on the same form!) I would
suggest developing a custom control that inherits from NumericUpDown, and
implements the functionality you want without writing custom event handlers.
--
Regards,
Mr. Jani Järvinen
C# MVP
Helsinki, Finland ja***@removethi s.dystopia.fi http://www.saunalahti.fi/janij/ This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics |
by: Koert |
last post by:
Hi,
In the NumericUpDown control I have to detect that Tab was pressed so I have overroden the PreProcessMessage function. In for example the DateTimePicker this works fine but not in the NumericUpDown. The debugger does not stop in the PreProcessMessage function. Is this a bug in the NumericUpDown control?
thanks, Koert
|
by: Patrick Blackman |
last post by:
Can anyone tell me how to get the numericupdown control to support themes?
|
by: Tantra Veda |
last post by:
Hello C# gurus,
I have a question about finding cursor position in NumericUpDown control. On
my form I have a numericUpDown control with 2 decimal places. I want to
increment value in the numeric box by 1 if my cursor is in front of the
decimal point. If the cursor is after the decimal point, I want to increment
the value by 0.1. How do I accomplish this? Is there a way to find out the
cusror position in the control relative to decimal...
|
by: ReMEn |
last post by:
Didn't find much documentation on value formatting on a NumericUpDown
control. is it possible to separate numbers by a special character.
For example, If I wanted to display an option to change a person's height in
a NumericUpDown, I would not want them to see 62, I'd want them to see 6'2"
(6-Foot-Two).
Is this even possible?
Thankyou,
|
by: Koert |
last post by:
Hi
In the NumericUpDown control I have to detect that Tab was pressed so I have inherited the NumericUpDown and overroden the PreProcessMessage function. In the DateTimePicker (for example) this works fine but not in the NumericUpDown. It seams that the debugger does not access the PreProcessMessage function. Is this a bug in the NumericUpDown control? Is there an other way to detect that the Tab was pressed in the control
thanks, Koer
| |
by: stx |
last post by:
Hope some one can help, but I need to create a resizable numericUpDown control. This I have created currently using a textbox and a user control implemented using the ControlPaint.DrawScrollButton method
These currently seems fine, the problem I have is how would I go about implementing a method that would continue incrementing/decrementing the value once you have clicked down and hold onto the one of the buttons like the current...
|
by: bnob |
last post by:
It is possible to format the numeric value of the NumericUpDown control
For example : display numbers in 2 digits, instead of 1 display 01, 0
-> 00 , 9 -> 09
Any idea
--
Ceci est une signature automatique de MesNews.
Site : http://www.mesnews.net
|
by: Len Weltman |
last post by:
I am trying to pass a NumericUpDown object into a class method using Visual
Studio 2005, but the control type is
not found in Intellisense and the type declaration is flagged as an error.
Here is a code sample (which doesn't
work):
*** Begin code ***
|
by: tommaso.gastaldi |
last post by:
Hello,
A probably dumb question...
does anyone know hot to avoid that if one keep the mouse pressed on an
arrow of the numericUpDown it continues to fire events (it uses
evidently a timer) ?
I want 1 event for each click, and no timer activation. I have tried
using disable within the handler but does not work.
|
by: =?Utf-8?B?R3VzIENodWNo?= |
last post by:
How do I set the Maximum values of a NumericUpDown Control?
If OptionBox TermsMonths.Checked = True Then
Control.Maximum() = 360
Else
Control.Maximum() = 30
--
Thank You
Gus Chuchanis
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
| |
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed.
This is as boiled down as I can make it.
Here is my compilation command:
g++-12 -std=c++20 -Wnarrowing bit_field.cpp
Here is the code in...
|
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: conductexam |
last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one.
At the time of converting from word file to html my equations which are in the word document file was convert into image.
Globals.ThisAddIn.Application.ActiveDocument.Select();...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
| |
by: adsilva |
last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
|
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
| |