Hello, I am using Visual Studio .Net 2005 beta. I have my computer's two
comm ports connected with a serial cable (and null modem). I'm trying to
write the letter 'a' out on comm port 1 with the C# program and see it appear
in a Hyperterminal window open on comm port 2. Hyperterminal is configured
with the same settings that the port 1 is opened with (see below), but I do
not get an 'a', I get some funky ASCII character that looks like a spade with
a little block after it. What do I need to do differently?
public String commPortStr = "COM1";
public SerialPort commPort;
commPort = new SerialPort(comm PortStr, 19200, Parity.None, 8, StopBits.One);
commPort.Open() ;
char[] test = new char[1];
test = 'a';
commPort.Write( test, 0, 1);
Thanks,
Don
1  8470 
Doh! Nevermind. I had forgotten to change the baud rate in another part of
the code where the SerialPort component was created. Dopey me.
Don
"Don Tucker" wrote: Hello, I am using Visual Studio .Net 2005 beta. I have my computer's two
comm ports connected with a serial cable (and null modem). I'm trying to
write the letter 'a' out on comm port 1 with the C# program and see it appear
in a Hyperterminal window open on comm port 2. Hyperterminal is configured
with the same settings that the port 1 is opened with (see below), but I do
not get an 'a', I get some funky ASCII character that looks like a spade with
a little block after it. What do I need to do differently?
public String commPortStr = "COM1";
public SerialPort commPort;
commPort = new SerialPort(comm PortStr, 19200, Parity.None, 8, StopBits.One);
commPort.Open() ;
char[] test = new char[1];
test = 'a';
commPort.Write( test, 0, 1);
Thanks,
Don This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics | |
by: Tamir.D |
last post by:
is there a way to embed the System.IO.Ports.SerialPort object in my html . so
that the client can access to a device connected to his SerialCOM ?
i tried to wrap the System.IO.Ports.SerialPort in my own component and then
put it in <object> but it doesnt seem to work, any suggestions?
|
by: ricolee99 |
last post by:
Hi Everyone,
I'm using the System.IO.Ports.SerialPort component to attempt to kill
an existing component opened by another application.
I use the following code:
SerialPort serialPort = new SerialPort ("COM1");
if(serialPort.IsOpen)
|
by: nmsreddi |
last post by:
Hi friends
I am working on serialport in c# ,i am using C#2005 i have successfully done the serial communication with GSM modem and able to send and receive data ,
the main problem ,the serial port class in C# is accepting only ASCII values upto 127 only, the values those greater than 127 ,is automatically converted to value 63(?) ,ihave searched alot in the net and finally found from MSDN that ,serialport class accepts only ASCII values...
|
by: emilyhf |
last post by:
This C# program is use to convert decimal to hex and send through serial port in ASCII characters. For example: I try to send a string variable in Hex format which i need to convert to a standart ASCII string; eg "70d9b7" where "b7" is the checksum of 2's complement. i have some problem in convert the "d9" and "b7" to the correct ASCII string as the ASCII is overflow from 8 till F, i think... If anyone can help me to debug the problem, i would...
|
by: Adriano |
last post by:
Hello,
I'm developing an application in VB.NET 2005 that communicates with a device
through RS232,
and need to send the following sequence of hexadecimal data to the device:
0xFF, 0x01, 0xC3, 0xE3, 0xFF, 0xFF.
That's the configuration:
| | |
by: egress |
last post by:
Forgive me for stupid questions for I am new to serial IO programming.
I am developing an app that will need to communicate with a device via
RS232 protocol using a standard 9 pin serial cable. From what I
understand this can be accomplished relativly easy using .net 2.0
SerialPort component over a COM port.
My question: because most newer computers don't have 9 pin serial
ports (COM), can the SerialPort component use a USB connection...
|
by: Nasif |
last post by:
Currently I am writing a program which sends and receives messages
through serial port to a device. I am using C# and Microsoft Visual
studio 2005 for windows program. But my problem is when i try to write
in serial port from my windows a Timeoutexception is thrown. I use
SerialPort class in System.IO.Ports and for writing port i used
write() function under the built in class SerialPort. But when i use
hyperterminal , everything goes fine....
|
by: sklett |
last post by:
I'm trying to send some printer commands (ZPLII) to an attached USB printer
using the SerialPort component. I didn't get very far at all. In fact I
haven't gotten anywhere.
The first problem I encountered is that a call to SerialPort.GetPortNames()
returns an empty string. In other words, NO port names are returned. I'm
not terribly knowledgable about ports but from the Hardware Manager I did
notice that I don't have the Ports and...
|
by: jensa |
last post by:
Hi,
I am currently writing a simple form application in C# that uses the SerialPort class (C# 3.5). But I have put my head in the wall several times to solve a simple problem.
I have a datagridview and each time the event on row added is run I need to send some stuff out on the serialport. I am using the SerialPort write method to write byte data.
Each times several rows are added (more than one), in the same time frame (or very near in...
|
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look !
Part I. Meaning of...
|
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed.
This is as boiled down as I can make it.
Here is my compilation command:
g++-12 -std=c++20 -Wnarrowing bit_field.cpp
Here is the code in...
| | |
by: Hystou |
last post by:
Overview:
Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: conductexam |
last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one.
At the time of converting from word file to html my equations which are in the word document file was convert into image.
Globals.ThisAddIn.Application.ActiveDocument.Select();...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
|
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
|
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
| | |
by: bsmnconsultancy |
last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...
| |
