I have create a setup project for a dot net application integrated with
embedded crystal reports. The setup is running perfectly on the local pc and
open the reports for given data but not opening the reports to other systems
where it is being deployed, giving error of invalid parameter and hangs the
report.
6  2259 
hi,
You have to install a couple of merge modules & your key in one of them.
take a look at the crytal support web site , there there is a document named
crnet_deploymen t.pdf which address it
if you do not find it let me know about it and I will forward you my copy
cheers,
--
Ignacio Machin,
ignacio.machin AT dot.state.fl.us
Florida Department Of Transportation
"Sabeen Sadiq" <sa**********@e intelligencesof t.com> wrote in message
news:eT******** ******@tk2msftn gp13.phx.gbl... I have create a setup project for a dot net application integrated with
embedded crystal reports. The setup is running perfectly on the local pc
and
open the reports for given data but not opening the reports to other
systems
where it is being deployed, giving error of invalid parameter and hangs
the
report.
I have installe merge modules for crystal report. but ill like to know that
document from crystal support website so plz can u give me the link to that
article or give me a copy from urs
"Ignacio Machin ( .NET/ C# MVP )" <ignacio.mach in AT dot.state.fl.us > wrote
in message news:u4******** ******@TK2MSFTN GP12.phx.gbl... hi,
You have to install a couple of merge modules & your key in one of them.
take a look at the crytal support web site , there there is a document
named crnet_deploymen t.pdf which address it
if you do not find it let me know about it and I will forward you my copy
cheers,
--
Ignacio Machin,
ignacio.machin AT dot.state.fl.us
Florida Department Of Transportation
"Sabeen Sadiq" <sa**********@e intelligencesof t.com> wrote in message
news:eT******** ******@tk2msftn gp13.phx.gbl...I have create a setup project for a dot net application integrated with
embedded crystal reports. The setup is running perfectly on the local pc
and
open the reports for given data but not opening the reports to other
systems
where it is being deployed, giving error of invalid parameter and hangs
the
report.
Hi,
support.busines sobjects.com/communityCS/
TechnicalPapers/crnet_deploymen t.pdf
Out of curiosity, is the target system a win9x machine? If so you need to
do something else
cheers,
--
Ignacio Machin,
ignacio.machin AT dot.state.fl.us
Florida Department Of Transportation
"Sabeen Sadiq" <sa**********@e intelligencesof t.com> wrote in message
news:eJ******** ******@TK2MSFTN GP10.phx.gbl... I have installe merge modules for crystal report. but ill like to know that
document from crystal support website so plz can u give me the link to
that
article or give me a copy from urs
"Ignacio Machin ( .NET/ C# MVP )" <ignacio.mach in AT dot.state.fl.us >
wrote
in message news:u4******** ******@TK2MSFTN GP12.phx.gbl... hi,
You have to install a couple of merge modules & your key in one of them.
take a look at the crytal support web site , there there is a document
named crnet_deploymen t.pdf which address it
if you do not find it let me know about it and I will forward you my copy
cheers,
--
Ignacio Machin,
ignacio.machin AT dot.state.fl.us
Florida Department Of Transportation
"Sabeen Sadiq" <sa**********@e intelligencesof t.com> wrote in message
news:eT******** ******@tk2msftn gp13.phx.gbl... >I have create a setup project for a dot net application integrated with
> embedded crystal reports. The setup is running perfectly on the local
> pc
> and
> open the reports for given data but not opening the reports to other
> systems
> where it is being deployed, giving error of invalid parameter and hangs
> the
> report.
>
>
Thanx for ur help. i got my prob solved.
Thanx for ur assistance. My problem has been resolved.
hi,
what was it?
cheers,
--
Ignacio Machin,
ignacio.machin AT dot.state.fl.us
Florida Department Of Transportation
"Sabeen Sadiq" <sa**********@e intelligencesof t.com> wrote in message
news:%2******** ********@TK2MSF TNGP14.phx.gbl. .. Thanx for ur assistance. My problem has been resolved.
This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics | |
by: insomniac |
last post by:
Hello,
I've been fighting a problem I've had with deploying my application
that makes use of Crystal Reports. I've recently added a merge module
that fixed the problem (CyrstalReports10_NET_EmbeddedReporting.msm).
The only problem is the merge module is nearly 50 MB in size and
certainly hosts more application information than I really need. I
would like to eliminate this module and just use the esentials for my
project.
|
by: Gudni G. Sigurdsson |
last post by:
Hi.
I am working on a program for the .NET Framework written in C# with Visual
Studio .NET. With this program, one can print a report realized with the
Crystal Report software included with VS .NET. This has all been working
fine until recently, when I had to install and run the program on more
computers. Then I suddenly start getting error messages like: 'Cannot find
KeycodeV2.dll, or invalid keycode'.
The .NET framework is, of...
|
by: Dmitry Karneyev |
last post by:
Hi!
I need to deploy .NET application (ADO.NET + Crystal Reports) in local
intranet.
All assemblies of application will be shared in the folder on the server so
all users can
execute this application on their pc from that folder. (of course I need to
apply some .NET security permissions).
So I've got two questions:
what is the best way to install crystal reports engine on users pc?
what kind of problems may occur in such enviroment ?
|
by: hlam |
last post by:
After deploying the application and running it on an XP
p.c. I get the message from Crystal Reports Viewer
Window: Load Report Failed
Here is what I've used:
. Connecting to Sql Server 2000
. Windows application (NOT ASP.NET) on Windows XP
Professional
. All reports were created using a form, a .rpt ,
and crystal report viewer control
|
by: wtistang |
last post by:
I developed an asp.net/crystal app in my local machine using the
crystal reports which comes with VS 2003. Now I am planning to deploy
it to a web server which support asp.net and crystal reports (version
9). What steps I should follow to make a successful deployment?
Thanks in advance.
Micheal
| | |
by: adeebraza |
last post by:
My Dear, Salman1karim
As you have finished your first project in vb6, MS Access 2003 and crystal reports 11 and you want to create setup file. You need Pdcmdln.EXE file to create setup program of VB6 for your project.
First of all compile your VB6 Project & Make project EXE file then run the project EXE independently from the Icon. If your project is working perfectly Ok then make a setup file as given below.
1. Collect all the files of your...
|
by: Liz |
last post by:
I was intending to use an XCOPY install for a VS2005 C# WinForms app but
when I copied the files and ran the app on a clean machine it failed when it
needed Crystal Reports. Can you not use XCOPY deployment if you have
Crystal Reports dependencies?
Is there an available Crystal redistribution package I can run before doing
my XCOPY deployment?
TIA
|
by: Greg Smith |
last post by:
I have a vs2005Win application which prints a Crystal Reports report
just fine from both of my development machines. When I deploy the
application it chokes loading and I get a vague message that I may have
a license file problem.
Obviously a deployment issue.
What files need to be included in a vs2005Win deployment to allow
Crystal Reports to work OK?
|
by: =?Utf-8?B?Q2lhcmFuIE8nJ0Rvbm5lbGw=?= |
last post by:
On reflection, you could possibly make the app a self extracting zip file
which extracts the EXE and a settings file and then starts the app, then when
you app closes, it can repack the settings file and itself into the exe. You
would probably want a tool for this bit which could be in the zip too.
So the app isnt single exe when running but when not running, it is.
Just an idea for you to think about.
Another option would possibly be to...
|
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look !
Part I. Meaning of...
|
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed.
This is as boiled down as I can make it.
Here is my compilation command:
g++-12 -std=c++20 -Wnarrowing bit_field.cpp
Here is the code in...
| | |
by: Hystou |
last post by:
Overview:
Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
|
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: conductexam |
last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one.
At the time of converting from word file to html my equations which are in the word document file was convert into image.
Globals.ThisAddIn.Application.ActiveDocument.Select();...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
| | |
by: adsilva |
last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
| |
