Hi,
I'm writing a client/server app.
I want to run my server on "Windows Server 2003" PC.
This PC has two network cards. 1 for Internet and other is plugged into
a switch. My plan is that I'll connect 2 or 4 PC to the switch and the
server
PC will give out DHCP IP address.
I have configured DHCP server and set the IP range, for example,
192.168.1.0-192.168.1.10. and subnet mask is 255.255.0.0. It seems that
DHCP is doing its job. I mean, when I conneted 2 PC to the switch, they are
getting valid IP addresses, for example, 192.168.1.1, 192.168.1.2. and they
can ping each other as well.
However when I run my server on the server with IP for example,
192.168.1.0, and client on 192.168.1.1/1.2, I'm unable to connect.
I'm getting socket exception with additional information saying the remote
server actively refused the connection..
Could you please let me know where did I stuff up.
Cheers,
Naveen.
2  1680 
Sounds like a pretty normal LAN setup to me
If error message says the remote server actively refused connection, then
are you sure your server has opened the port and is listening?
Checked the ports are open with command prompt netstat -an?
Checked that software firewall isn't blocking the port?
Checked that client and server ports are using the same protocol (tcp/udp
etc)
Checked that client is attempting to connect to correct port?
Hi,
Thanks for your post.
My code wasn't opening the port at all when I used "netstat -an".
I could fix the problem. Now my prog is working fine.
Cheers,
Naveen.
"Claire" wrote: Sounds like a pretty normal LAN setup to me
If error message says the remote server actively refused connection, then
are you sure your server has opened the port and is listening?
Checked the ports are open with command prompt netstat -an?
Checked that software firewall isn't blocking the port?
Checked that client and server ports are using the same protocol (tcp/udp
etc)
Checked that client is attempting to connect to correct port?
This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics | |
by: martinnitram |
last post by:
Dear all,
following are some piece of my code (mainly create a socket
connection to server and loop to receive data):
# function to create and return socket
def connect():
server_config = ('192.168.1.50', 3333);
sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
try:
sock.connect()
|
by: Russell Warren |
last post by:
Does anyone know the scope of the socket.setdefaulttimeout call? Is it
a cross-process/system setting or does it stay local in the application
in which it is called?
I've been testing this and it seems to stay in the application scope,
but the paranoid side of me thinks I may be missing something... any
confirmation would be helpful.
|
by: DreJoh |
last post by:
I've read many articles on the subject and the majority of them give the same
solution that's in article 821625 on the MSDN website. I'm using the
following code and when a the client disconnects the child socket remains in
the CLOSE_WAIT state. Anyone have any idea what's missing?
----------------------------- Socket Code -----------------------------
namespace Sockets
{
#region Class - SocketClient
|
by: Robert A. van Ginkel |
last post by:
Hello Fellow Developer,
I use the System.Net.Sockets to send/receive data (no
tcpclient/tcplistener), I made a receivethread in my wrapper, the
receivethread loops/sleeps while waiting for data and then fires a
datareceived event.
Within the waitingloop there is a timeout function, but I want the the
'last-time-socket-used' variable set when the socket is finished sending.
When I send by System.Net.Sockets.Socket.Send(buffer()) (<--this...
|
by: zbcong |
last post by:
Hello:
I write a multithread c# socket server,it is a winform application,there is a richtextbox control and button,when the button is click,the server begin to listen the socket port,waiting for a incoming connection,the relative code snipprt as following::
private IPAddress myIP=IPAddress.Parse("127.0.0.1");
private IPEndPoint myServer;
private Socket socket;
private Socket accSocket;
private System.Windows.Forms.Button button2;...
| | |
by: zhebincong |
last post by:
Hello:
I write a multithread c# socket server,it is a winform application,there is
a richtextbox control and button,when the button is click,the server begin
to listen the socket port,waiting for a incoming connection,the relative
code snipprt as following::
private IPAddress myIP=IPAddress.Parse("127.0.0.1");
|
by: Droopy |
last post by:
Hi,
I try to implement a reusable socket class to send and receive data.
It seems to work but I have 2 problems :
1) I rely on Socket.Available to detect that the connection is closed (no
more data to expect). Sometimes, Socket.Available returns 0 but the other
end of the connection did not close it !
2) This class will be used by many other classes so I have to use the
|
by: Macca |
last post by:
My app has an asynchronous socket server. It will have 20 clients connected
to the server. Each client sends data every 500 millisecondsThe Connections
once established will not be closed unless there is a problem with the
connection.
I need to know which client has sent the incoming data as each client has
its own buffer on my "server" app.
I am using the standard asynch socket code from MSDN to listen for
connections and they...
|
by: =?Utf-8?B?TWlrZVo=?= |
last post by:
I have a sync socket application. The client is blocked with
Socket.Receive(...) in a thread, another thread calls Socket.Close(). This
unblock the blocked thread. But the socket server is still connected. Any
idea?
Thanks.
|
by: ThunderMusic |
last post by:
Hi,
I'm currently working with sockets. I accept connections using
m_mySocket.Listen(BackLogCount); But when I want to stop listening, I
shutdown all my clients and call m_mySocket.Close(), but it always raise a
OnConnect event (actually, it calls the callback function as if there was a
new connection attempt) and I receive a ObjectDisposedException as soon as I
do m_mySocket.EndAccept.
Does anyone have any idea of what I could do about...
|
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look !
Part I. Meaning of...
| | |
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
|
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed.
This is as boiled down as I can make it.
Here is my compilation command:
g++-12 -std=c++20 -Wnarrowing bit_field.cpp
Here is the code in...
|
by: jinu1996 |
last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth.
The Art of Business Website Design
Your website is...
|
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
| | |
by: conductexam |
last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one.
At the time of converting from word file to html my equations which are in the word document file was convert into image.
Globals.ThisAddIn.Application.ActiveDocument.Select();...
|
by: bsmnconsultancy |
last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...
| |
