webparts and multiple updatepanels (ajax)

=?Utf-8?B?TWFyYw==?=

Dear all

I have a scenario where I have 2 updatepanels on a page, each one containing
a weppartzone. the scriptmanager is outside of the updatepanels. when I go to
design display mode, i can drag and drop just once between the wepartzones -
then the solution breaks.

If the scriptmanager is inside a weppartzone everything works fine.

I found some old post that mentioned this problem. Is this issue resolved in
ASP.NET 3.5? I think it is not. If there is a solution or a workaround, can
you post thisone please?

Thanks in advance for your help,

Marc

Aug 20 '08 #1

Subscribe Reply

2250

Steven Cheng [MSFT]

Hi Marc,

From your description, you're encountering some problem when using ASP.NET
web part together with the AJAX update panel, correct?

As for this problem, I did found some existing web threads or cases which
mentioned some issue about using web part with AJAX, however, the symptom
seems abit different. Is it possible for you to create a simplified page
or web site project which demonstrate the behavior? You can send me that so
that I can perform some local test on it. You can reach me at the
following address:

"stcheng" + @ + "microsoft. com"

Sincerely,

Steven Cheng

Microsoft MSDN Online Support Lead
Delighting our customers is our #1 priority. We welcome your comments and
suggestions about how we can improve the support we provide to you. Please
feel free to let my manager know what you think of the level of service
provided. You can send feedback directly to my manager at:
ms****@microsof t.com.

=============== =============== =============== =====
Get notification to my posts through email? Please refer to
http://msdn.microsoft.com/en-us/subs...#notifications.

=============== =============== =============== =====
This posting is provided "AS IS" with no warranties, and confers no rights.

--------------------

>From: =?Utf-8?B?TWFyYw==?= <Ro*******@comm unity.nospam>
Subject: webparts and multiple updatepanels (ajax)
Date: Wed, 20 Aug 2008 01:18:01 -0700
Dear all

I have a scenario where I have 2 updatepanels on a page, each one

containing

>a weppartzone. the scriptmanager is outside of the updatepanels. when I go

>design display mode, i can drag and drop just once between the wepartzones

>then the solution breaks.

If the scriptmanager is inside a weppartzone everything works fine.

I found some old post that mentioned this problem. Is this issue resolved

>ASP.NET 3.5? I think it is not. If there is a solution or a workaround,

can

>you post thisone please?

Thanks in advance for your help,

Marc

Aug 21 '08 #2

=?Utf-8?B?TWFyYw==?=

Hi Steven

Did you receive my email with the sample application?

Kind regards,

Marc

Aug 22 '08 #3

Steven Cheng [MSFT]

Hi Marc,

I have received your email and I'll perform some tests on this. I'll update
you for the results I got.

Sincerely,

Steven Cheng

Microsoft MSDN Online Support Lead
Delighting our customers is our #1 priority. We welcome your comments and
suggestions about how we can improve the support we provide to you. Please
feel free to let my manager know what you think of the level of service
provided. You can send feedback directly to my manager at:
ms****@microsof t.com.

=============== =============== =============== =====
Get notification to my posts through email? Please refer to
http://msdn.microsoft.com/en-us/subs...#notifications.

=============== =============== =============== =====
This posting is provided "AS IS" with no warranties, and confers no rights.
--------------------

>From: =?Utf-8?B?TWFyYw==?= <Ro*******@comm unity.nospam>
References: <43************ *************** *******@microso ft.com>

<Wk************ **@TK2MSFTNGHUB 02.phx.gbl>

>Subject: RE: webparts and multiple updatepanels (ajax)
Date: Fri, 22 Aug 2008 03:13:02 -0700

>
Hi Steven

Did you receive my email with the sample application?

Kind regards,

Marc

Aug 25 '08 #4

=?Utf-8?B?TWFyYw==?=

Thank you Steven - sorry for my impatience.

Kind Regards,

Marc

Aug 25 '08 #5

Steven Cheng [MSFT]

Hi Marc,

I have performed some test on the project you supplied.

In the test page, I can see that you put both the ScriptManager and
WebpartManager outside the two updatepanels and there is one webpart zone
in each updatepanel respectively.

I have tried draging/moving webparts in design-mode. It seems after the
first move, the webpart zones become uneditable. Is this also the problem
behavior you encountered?

Then I've done some changes, according to my further test, it is when you
put the "WebPartZon e" inside the updatepanel(als o I used a single
updatepanel instead of two separate one) will the design mode behavior
works correctly. I think the original problems behavior may due to the
partial update not correctly associate the status of webpart zones with
WebPartManager when you put it outside the updatepanel. Is it possible for
you to put the WebPartManger inside the updatepanel and use a single
updatepanel around the entrie page sections(where you need ajax postback)?

Sincerely,

Steven Cheng

Microsoft MSDN Online Support Lead
Delighting our customers is our #1 priority. We welcome your comments and
suggestions about how we can improve the support we provide to you. Please
feel free to let my manager know what you think of the level of service
provided. You can send feedback directly to my manager at:
ms****@microsof t.com.

=============== =============== =============== =====
Get notification to my posts through email? Please refer to
http://msdn.microsoft.com/en-us/subs...#notifications.

This posting is provided "AS IS" with no warranties, and confers no rights.

--------------------

>From: =?Utf-8?B?TWFyYw==?= <Ro*******@comm unity.nospam>
References: <43************ *************** *******@microso ft.com>

<Wk************ **@TK2MSFTNGHUB 02.phx.gbl>
<78************ *************** *******@microso ft.com>
<AC************ **@TK2MSFTNGHUB 02.phx.gbl>

>Subject: RE: webparts and multiple updatepanels (ajax)
Date: Mon, 25 Aug 2008 01:32:01 -0700

>
Thank you Steven - sorry for my impatience.

Kind Regards,

Marc

Aug 26 '08 #6

=?Utf-8?B?TWFyYw==?=

Hi Steven

This will be fine for me. I can live with one update panel.

Thanks,

Marc

Aug 26 '08 #7

Steven Cheng [MSFT]

Thanks for your reply Marc,

Appreciate your understanding.

Also, I would suggest you submit this problem to the connect feedback site
so that the dev team has the opportunity to hear on this. And other
community members suffers the problem can also vote on the issue/feedback.

http://connect.microsoft.com/feedbac...spx?SiteID=210

You feedback and comments are really valuable.

Sincerely,

Steven Cheng

Microsoft MSDN Online Support Lead
Delighting our customers is our #1 priority. We welcome your comments and
suggestions about how we can improve the support we provide to you. Please
feel free to let my manager know what you think of the level of service
provided. You can send feedback directly to my manager at:
ms****@microsof t.com.

This posting is provided "AS IS" with no warranties, and confers no rights.

--------------------

>Thread-Topic: webparts and multiple updatepanels (ajax)
thread-index: AckHfaDoh0xi9zC aQKyDeUWe1R9r+Q ==

>Subject: RE: webparts and multiple updatepanels (ajax)
Date: Tue, 26 Aug 2008 06:14:10 -0700

>
Hi Steven

This will be fine for me. I can live with one update panel.

Thanks,

Marc

Aug 27 '08 #8

Similar topics

3529

Using Atlas UpdatePanels with GridView sorting?

by: jmdolinger | last post by:

Hi all, I'm a newbie to Atlas (and recently ASP.NET) after coming from a long Java background, also have done quite a bit with an Ajax.NET/ASP.NET 1.1 project, but it was basically all javascript, nothing really having to do with ASP.NET... I'm attempting to put together an application that consists of several GridView controls each bound to some xml data. Each table exists in its own update panel. The two effects I'm going for are:

ASP.NET

1009

Hiding UpdatePanels / AJAX

by: =?Utf-8?B?QWxleA==?= | last post by:

I have 3 Update Panels on my page. On Page load, UpdatePanels 2 and 3 are hidden. When I click a button in UpdatePanel1, I display the other two UpdatePanels and their contents. UpdatePanel 2 has an server-side button that when clicked, it needs to reference controls in UpdatePanel3 and perform some functions on the server. Since UpdatePanel2 and 3 weren't included in the original page, clicking the button in UpdatePanel 2 doesn't do...

ASP.NET

1451

Webparts - Ajax.net = You must enable Web Parts by adding a ScriptManager to your page

by: Ryan | last post by:

Hi everyone, I have enabled my webparts site to use ajax by simply using updatepanels. This worked fine. Now I tried to enable drag and drop for the webparts so I added some stuff to the web config: http://blogs.neudesic.com/blogs/david_barkol/archive/2006/03/22/82.aspx I have a masterpage with no webpart stuff and child pages with all the webpartzones and the custom webpartmanager. I have tried putting the

ASP.NET

1435

An AJAX question

by: JC | last post by:

I have a form with a few UpdatePanels and each has an associated UpdatePanelAnimationExtender which causes fade-in and fade-out. In addition 2 of the animations disable the 2 buttons which trigger them in the Updating event and then enable them again in the Updated event. I was surprised to see that all the animations occur when any AJAX postback occurs. All the UpdatePanelAnimationExtenders have their UpdatePanel ID as their...

ASP.NET

1667

UpdatePanels refresh other UpdatePanels when UpdateMode is 'Condit

by: =?Utf-8?B?cml2YWxAbmV3c2dyb3Vwcy5ub3NwYW0=?= | last post by:

Morning, I've still got an issue with an AJAX enabled site. I've a master page with two ContentPlaceholders. I've then got a default aspx page which contains several user controls I've written. Each user control contains an UpdatePanel. Each UpdatePanel has UpdateMode='Conditional' set to it. When one of the UpdatePanel updates, they all update.

ASP.NET

1902

2 UpdatePanels - Each w/it's own Validation Summary

by: =?Utf-8?B?TWlrZQ==?= | last post by:

Hi. I have an aspx page containing 2 AJAX UpdatePanels. Both panels contain requiredfieldvalidators & each have a validationsummary control. Both panels contain a button control that when clicked cause the validation to occur. Currently if I'm clicking the button in UpdatePanel1 to validate the requiredfieldvalidators in UpdatePanel1, UpdatePanel2 requiredfieldvalidators also validate. This will also cause the errormessages from...

ASP.NET

1447

AJAX UpdatePanels Challenge

by: Nightcrawler | last post by:

I have a parent updatepanel with a repeater in it that generates 10 child updatepanels. I have one button that will refresh all these 10 updatepanels. On the button click I go through the repeateritems, pull some values from a few literals, pass the values to the webservice and then refresh that update panel for that repeater item. This means panel 1 is the first one to refresh before I move on to panel 2 and so forth. This currently...

C# / C Sharp

2164

What do WebParts, WPF and PopFly have in common?

by: clintonG | last post by:

Why don't we see more WebParts being used on the web? SharePoint gets all the fun? And what are the prevailing opinions be they what they may about the use of WebParts rather than WPF when the context would be the development of a service which enables users to select templates that have pre-established zones which function as content containers on a web page? PopFly has a "build a web page" service for example. I need something similar...

ASP.NET

2103

webparts and multiple updatepanels (ajax)

by: =?Utf-8?B?TWFyYw==?= | last post by:

Dear all I have a scenario where I have 2 updatepanels on a page, each one containing a weppartzone. the scriptmanager is outside of the updatepanels. when I go to design display mode, i can drag and drop just once between the wepartzones - then the solution breaks. If the scriptmanager is inside a weppartzone everything works fine. I found some old post that mentioned this problem. Is this issue resolved in

ASP / Active Server Pages

9655

What is ONU?

by: marktang | last post by:

ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look ! Part I. Meaning of...

General

9498

Changing the language in Windows 10

by: Hystou | last post by:

Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it. First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...

Windows Server

10172

Maximizing Business Potential: The Nexus of Website Design and Digital Marketing

by: jinu1996 | last post by:

In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth. The Art of Business Website Design Your website is...

Online Marketing

10110

The easy way to turn off automatic updates for Windows 10/11

by: Hystou | last post by:

Overview: Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...

Windows Server

9964

Discussion: How does Zigbee compare with other wireless protocols in smart home applications?

by: tracyyun | last post by:

Dear forum friends, With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...

General

7517

Access Europe - Using VBA to create a class based on a table - Wed 1 May

by: isladogs | last post by:

The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM). In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules. He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms. Adolph will...

Microsoft Access / VBA

6749

Couldn’t get equations in html when convert word .docx file to html file in C#.

by: conductexam | last post by:

I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one. At the time of converting from word file to html my equations which are in the word document file was convert into image. Globals.ThisAddIn.Application.ActiveDocument.Select();...

C# / C Sharp

5398

Trying to create a lan-to-lan vpn between two differents networks

by: TSSRALBI | last post by:

Hello I'm a network technician in training and I need your help. I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs. The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols. I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...

Networking - Hardware / Configuration

2894

Comprehensive Guide to Website Development in Toronto: Expert Insights from BSMN Consultancy

by: bsmnconsultancy | last post by:

In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...

General