Hi,
Up until now I have been shipping debug builds of my asp.net
application and including the pdb files too, even into production
systems, primarily because it gives us proper stack traces with line
numbers in the event of an exception. I haven't been aware of any
stability, memory or performance problems with the application, even
for sites that have been running 24/7 for months with worker process
recycling disabled.
is there any reason I shouldn't continue doing this indefinitely and
only switch to release builds if a customer needs a really highly
tuned system, or are there some gotchas with debug builds?
a related question - any general guidelines as to how much faster C#
code performs in release build? as for most asp.net apps I would
anticipate that the system load of the application as a whole is
probably 50% IIS/franework, 50% database and only a miniscule amount
for my processing.
cheers
Andy
3  5681 
Hi,
See: http://weblogs.asp.net/scottgu/archi..._-enabled.aspx
Note also the followup link in the post.
--
Teemu Keiski
AspInsider, ASP.NET MVP http://blogs.aspadvice.com/joteke http://teemukeiski.net
<aj****@blueyon der.co.ukwrote in message
news:11******** *************@h 2g2000hsg.googl egroups.com...
Hi,
Up until now I have been shipping debug builds of my asp.net
application and including the pdb files too, even into production
systems, primarily because it gives us proper stack traces with line
numbers in the event of an exception. I haven't been aware of any
stability, memory or performance problems with the application, even
for sites that have been running 24/7 for months with worker process
recycling disabled.
is there any reason I shouldn't continue doing this indefinitely and
only switch to release builds if a customer needs a really highly
tuned system, or are there some gotchas with debug builds?
a related question - any general guidelines as to how much faster C#
code performs in release build? as for most asp.net apps I would
anticipate that the system load of the application as a whole is
probably 50% IIS/franework, 50% database and only a miniscule amount
for my processing.
cheers
Andy
Thanks very much for these links
it seems to me that we can continue to use a debug build for the code
in the application without too much penalty, but should definitely use
debug=false in the web.config
On 11 May, 10:08, "Teemu Keiski" <jot...@aspalli ance.comwrote:
Hi,
See:http://weblogs.asp.net/scottgu/archi...920_t-run-prod...
Note also the followup link in the post.
--
Teemu Keiski
AspInsider, ASP.NET MVPhttp://blogs.aspadvice .com/jotekehttp://teemukeiski.net
<ajf...@blueyon der.co.ukwrote in message
news:11******** *************@h 2g2000hsg.googl egroups.com...
Hi,
Up until now I have been shipping debug builds of my asp.net
application and including the pdb files too, even into production
systems, primarily because it gives us proper stack traces with line
numbers in the event of an exception. I haven't been aware of any
stability, memory or performance problems with the application, even
for sites that have been running 24/7 for months with worker process
recycling disabled.
is there any reason I shouldn't continue doing this indefinitely and
only switch to release builds if a customer needs a really highly
tuned system, or are there some gotchas with debug builds?
a related question - any general guidelines as to how much faster C#
code performs in release build? as for most asp.net apps I would
anticipate that the system load of the application as a whole is
probably 50% IIS/franework, 50% database and only a miniscule amount
for my processing.
cheers
Andy- Hide quoted text -
- Show quoted text -
Yup, that's what Scott says to be a sort of "compromise "
Teemu
<aj****@blueyon der.co.ukwrote in message
news:11******** *************@e 65g2000hsc.goog legroups.com...
Thanks very much for these links
it seems to me that we can continue to use a debug build for the code
in the application without too much penalty, but should definitely use
debug=false in the web.config
On 11 May, 10:08, "Teemu Keiski" <jot...@aspalli ance.comwrote:
>Hi,
See:http://weblogs.asp.net/scottgu/archi...920_t-run-prod...
Note also the followup link in the post.
--
Teemu Keiski
AspInsider, ASP.NET
MVPhttp://blogs.aspadvice .com/jotekehttp://teemukeiski.net
<ajf...@blueyo nder.co.ukwrote in message
news:11******* **************@ h2g2000hsg.goog legroups.com...
Hi,
Up until now I have been shipping debug builds of my asp.net
application and including the pdb files too, even into production
systems, primarily because it gives us proper stack traces with line
numbers in the event of an exception. I haven't been aware of any
stability, memory or performance problems with the application, even
for sites that have been running 24/7 for months with worker process
recycling disabled.
is there any reason I shouldn't continue doing this indefinitely and
only switch to release builds if a customer needs a really highly
tuned system, or are there some gotchas with debug builds?
a related question - any general guidelines as to how much faster C#
code performs in release build? as for most asp.net apps I would
anticipate that the system load of the application as a whole is
probably 50% IIS/franework, 50% database and only a miniscule amount
for my processing.
cheers
Andy- Hide quoted text -
- Show quoted text -
This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics | |
by: bnc mag |
last post by:
Hello,
Visual Studio 6 allows users to specify seperate post-build steps to
perform on Debug and Release builds. I am trying to do the same thing
in C#.NET 2003, but it appears as though I only get to specify *one* set
of post-build steps, regardless of whether I am building in Debug or
Release.
I would like to copy my resulting DLLs into respective "Debug" and
"Release" directories elsewhere on my machine, hence my need for such a
|
by: Martin |
last post by:
Is there a reason for (and hopefully a work-around to) the
VC++.NET's compiler "flushing" each output file to disk before compiling
the next one? I've noticed this in both the 2002 and 2003 releases.
The application in question is a normal unmanaged C++ MFC
application migrated from VC++ 6. There are many files in the project
(250-300+) but the majority are fairly small...
Unlike VC++6, it appears that the new compiler will only
start...
|
by: spiff |
last post by:
We are migrating from VC++ 6 to VC++ 2003. It is a plain, unmanaged application with both C and C++ source. When running the debug build, even outside the debugger, the memory allocation/deallocation performance appears to be orders of magnitude slower than in VC++ 6. The release build runs fine - no performance problems.
We've rewritten some of the code to do fewer memory allocations/deallocations and that has helped those pieces. However,...
|
by: David++ |
last post by:
Hi there,
I have built a DLL in Visual C++ 6. When I build the DLL it builds fine for
the debug version of the DLL (and this DLL works fine), however, I seem
unable to build a Release version of the DLL. If I do a 'Batch Build' and
select both Debug and Relase versions for building it will build the debug
version but throws up errors for the Release version. For example, the output
I get for a Batch Build is this -
...
|
by: nospam |
last post by:
All the documentation says that leaving an ASP.NET application in debug
mode has a big performance hit. I can't detect any difference between
debug and non-debug modes. Am I missing something or is the
documentation wrong?
I've been load testing an ASP.NET website (built in VS.NET 2003 in C#).
I've used the ACT to generate heavy loads over several minutes. Debug
or no debug produces almost identical performance results.
| | |
by: Jon |
last post by:
Hello,
I have 3 asp.net dll's that are on my host in debug mode, now, the runtime
ones won't work, I know the reason why.
But i just wanted to know if there#ll be much of a performance reduction.
The dll's in question are the 2005 application blocks for returning data.
Thanks,
|
by: kurt sune |
last post by:
I am having trouble publishing a website for RELEASE.
1. web.config: <compilation defaultLanguage="vb" debug="false">
2. in Configuration manager I set the configuration to Release for the
website
3. in Configuration manager I set the Active solution configuration to
Release
|
by: Andrew Rowley |
last post by:
I am having trouble getting debug and release builds to work properly
with project references using C++ .NET and Visual Studio 2003.
I created a test solution, with a basic Windows form C++ project.
I then add a class library, and add a reference to this project in the
first project.
When I do a release build, I see the following in the output from the
DLL compile:
/OUT:"C:\Documents and Settings\Andrew\My Documents\Visual Studio
|
by: =?Utf-8?B?bG10dGFn?= |
last post by:
We have developed a number of different applications (ASP.NET web site,
Windows services, DLLs, Windows forms, etc.) in C# 2.0. We have developed
and unit tested all these applications/components using Debug mode. Now we
are ready to compile everything for release to production. However, we don’t
know whether we should compile all the applications/components/assemblies
using Release mode (or keep everything in Debug mode).
We’ve...
|
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look !
Part I. Meaning of...
|
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed.
This is as boiled down as I can make it.
Here is my compilation command:
g++-12 -std=c++20 -Wnarrowing bit_field.cpp
Here is the code in...
| | |
by: jinu1996 |
last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth.
The Art of Business Website Design
Your website is...
|
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: conductexam |
last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one.
At the time of converting from word file to html my equations which are in the word document file was convert into image.
Globals.ThisAddIn.Application.ActiveDocument.Select();...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
|
by: adsilva |
last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
| | |
by: bsmnconsultancy |
last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...
| |
