What is it with Microsoft, do they normally publish tools that don't work
and provide migrations that don't work either? Publish Web just goes to
never never land once I log into my server after the User/Password login
screen -- just a partially repainted VS 2005 screen and nothing else, no
errors, no warnings, nothing. Just one more feature that doesn't work.
I think I passed my limit of sanity some time ago. As far as ASP 1.1 to ASP
2.0 migration (just see my post below) -- direct migration and it causes my
web server to puke the following "Could not load type
'WebApplication 1.Global'..." -- this is a direct migration and MS can't
even get their own products right -- this is pathetic!
I would give an arm and a leg to "talk" to the VS dev team. VERY
frustrated!
Rob. 2 1325
Hi Rob,
For some reason Publish Site... takes an inordinately long amount of
time if you're doing a remote publish, but it eventually 'unfreezes' VS
and finishes the process. I don't know why it takes so damn long, and
it's pretty frustrating, but it should work...
Good luck,
Alex
Alex,
Thanks for the response, after about 20 minutes I gave up and ended the task
via Task Manager.
Rob.
"Alex Greenberg" <mi*********@gm ail.com> wrote in message
news:11******** **************@ g49g2000cwa.goo glegroups.com.. . Hi Rob,
For some reason Publish Site... takes an inordinately long amount of time if you're doing a remote publish, but it eventually 'unfreezes' VS and finishes the process. I don't know why it takes so damn long, and it's pretty frustrating, but it should work...
Good luck,
Alex This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics |
by: Alex Greenberg |
last post by:
I don't know, but I find the Publish Web Site feature very lacking and
weak.
I mean, why does the damn thing have to delete unrelated directories
like /images /documents etc.
This is so impractical, what if my users generate these documents or
images through their interaction with the site, and then I change some
code and publish it, boom, everything is gone. I cannot put these
folders outside the solution due to security/pathing...
|
by: WT |
last post by:
Hello,
I have been publishing my web site many times to the remote where resides my
final web site.
Everything was ok, but to-day, without any configuration change, vs doesn't
copy final files to the remote site.
It finish with a message of publish sucess but no files nor folders on the
remote disk ?
I have checked rights on this folder, everyone have modify.
|
by: Stan |
last post by:
What exactly is required in order to use Publish Web Site dialog in VS.NET
2005?
Permissions, Front Page extenstion, etc?
I keep getting different erros all the time - login boxes, server errors,
etc.
It's not like that it does not work, but the process is unstable, I can't
quite figure it out.
|
by: Al Christoph |
last post by:
I posted this last week end in the MSDN forums. No luck there. Let's see what
the experts here have to say:-))))
I have a rather convoluted project. The distributable will come in eight
different flavors, each with its main program, libraries, datafiles, doco,
etc.
Each flavor will also have one or more standalone executables that can be
called as tools from within the main program.
|
by: mrajanikrishna |
last post by:
Hi friends,
I've designed an application in my local system using VS.NET 2003.
(VB.NET and ASP.NET)
Its working fine. Now, I want to publish to my ISPs server. I've FTP
account.
How can I publish to server? Which files are needed to transfer?
in classic ASP, I copied all the files(what I used in my virtual
| |
by: Jason |
last post by:
Hi all,
I am no longer able to publish a web site project using Visual Studio 2005
Professional.
I am publishing it to an FTP url, and this used to work just fine.
I enter the username and password and select "passive mode" when publishing
the site, like I have always done. Visual Studio deletes the existing files,
but then doesn't write the new ones, though it tells me the operation was
|
by: moondaddy |
last post by:
I have a new VS 2005 web app project which compiles find and publishes fine
to a local directory. when I try to publish it to a remote server, it fails
almost instantly (2 or 3 seconds). So I created a new website on the server
(no files, just a site with a dedicated IP address). then I created a new
vs 2005 web site project (instead of a web app project) with only the
default file in it such as default.aspx. I published it to a local...
|
by: Pedro Vera |
last post by:
Greetings,
I have a plain VS 2005 VB.net solution that holds a single web site.
The web site builds fine when I run it locally, and if I copy it as-is
to my remote server everything runs. The problem is that I run Build -
disappearing.
I even tested my local copy of VS 2005 against a bunch of my other
projects, and in every case the project works properly and I get a
precompiled site when I request Build -Publish Web Site.
|
by: =?Utf-8?B?Sm9obiBT?= |
last post by:
Hi,
I'm trying to publish a new web service that I've written. It's fine when I
publish it on the local PC but I get Publish failed in the development
environment when I try to publish it to another server.
|
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look !
Part I. Meaning of...
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
| |
by: jinu1996 |
last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth.
The Art of Business Website Design
Your website is...
|
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: conductexam |
last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one.
At the time of converting from word file to html my equations which are in the word document file was convert into image.
Globals.ThisAddIn.Application.ActiveDocument.Select();...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
|
by: adsilva |
last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
| |
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
| |