I am trying to debug a simple asp.net project using
Visual Studio.net(2002 ) and receive the following error:
Error while tring to run project. Unable to start
debugging on the web server. Catastrophic failure. Would
you like to disable future attempts to debug ASP.NET
pages for this project?
I am running windows 2000. I looked up this error in the
support section and found the error but without
the "catastroph ic failure". I tried to fix it with the
suggestions for the first part of the error to no avail.
HELP if anyone knows whats wrong here,
Thanks,
Angel
4  1552 
Have a look at this walkthru: http://www.networkip.net/tidbits/woes.htm
--
-----------
Got TidBits?
Get it here: www.networkip.net/tidbits
"Angel" <as****@hotmail .com> wrote in message
news:07******** *************** *****@phx.gbl.. . I am trying to debug a simple asp.net project using
Visual Studio.net(2002 ) and receive the following error:
Error while tring to run project. Unable to start
debugging on the web server. Catastrophic failure. Would
you like to disable future attempts to debug ASP.NET
pages for this project?
I am running windows 2000. I looked up this error in the
support section and found the error but without
the "catastroph ic failure". I tried to fix it with the
suggestions for the first part of the error to no avail.
HELP if anyone knows whats wrong here,
Thanks,
Angel
I looked at the site went through the various reasons
tried to change according to the various messages and
still got the same error.
"Error while tring to run project. Unable to start
debugging on the web server. Catastrophic failure. Would
you like to disable future attempts to debug ASP.NET
pages for this project?"
On this site it does NOT HAVE this particular error
listed. What is wrong here? Thanks for the help
Angel -----Original Message-----
Have a look at this walkthru:
http://www.networkip.net/tidbits/woes.htm
--
-----------
Got TidBits?
Get it here: www.networkip.net/tidbits
"Angel" <as****@hotmail .com> wrote in message
news:07******* *************** ******@phx.gbl. .. I am trying to debug a simple asp.net project using
Visual Studio.net(2002 ) and receive the following
error:
Error while tring to run project. Unable to start
debugging on the web server. Catastrophic failure.
Would you like to disable future attempts to debug ASP.NET
pages for this project?
I am running windows 2000. I looked up this error in
the support section and found the error but without
the "catastroph ic failure". I tried to fix it with the
suggestions for the first part of the error to no
avail. HELP if anyone knows whats wrong here,
Thanks,
Angel
.
ok, do you have IIS running on the webserver? you check thru IIS management.
In addition, verify that your debug verb is set to true in the webconfig
file. See if these two suggestions make a difference.
--
-----------
Got TidBits?
Get it here: www.networkip.net/tidbits
"Angel" <as****@hotmail .com> wrote in message
news:03******** *************** *****@phx.gbl.. . I looked at the site went through the various reasons
tried to change according to the various messages and
still got the same error.
"Error while tring to run project. Unable to start
debugging on the web server. Catastrophic failure. Would
you like to disable future attempts to debug ASP.NET
pages for this project?"
On this site it does NOT HAVE this particular error
listed. What is wrong here? Thanks for the help
Angel
-----Original Message-----
Have a look at this walkthru:
http://www.networkip.net/tidbits/woes.htm
--
-----------
Got TidBits?
Get it here: www.networkip.net/tidbits
"Angel" <as****@hotmail .com> wrote in message
news:07******* *************** ******@phx.gbl. .. I am trying to debug a simple asp.net project using
Visual Studio.net(2002 ) and receive the following error:
Error while tring to run project. Unable to start
debugging on the web server. Catastrophic failure. Would you like to disable future attempts to debug ASP.NET
pages for this project?
I am running windows 2000. I looked up this error in the support section and found the error but without
the "catastroph ic failure". I tried to fix it with the
suggestions for the first part of the error to no avail. HELP if anyone knows whats wrong here,
Thanks,
Angel
.
Yes IIS is running(checked it in Services and its
management screen) and in the webconfig file contains the
debug="true". I do not know what is going on. I installed
VS.net, selected a new vb webproject, placed a server
side textbox on the webpage and ran the debug, simple
enough and I get this error message. HELP!!! Thanks for
your quick response on this matter.
Angel -----Original Message-----
ok, do you have IIS running on the webserver? you check
thru IIS management.In addition, verify that your debug verb is set to true
in the webconfigfile. See if these two suggestions make a difference.
--
-----------
Got TidBits?
Get it here: www.networkip.net/tidbits
"Angel" <as****@hotmail .com> wrote in message
news:03******* *************** ******@phx.gbl. .. I looked at the site went through the various reasons
tried to change according to the various messages and
still got the same error.
"Error while tring to run project. Unable to start
debugging on the web server. Catastrophic failure.
Would you like to disable future attempts to debug ASP.NET
pages for this project?"
On this site it does NOT HAVE this particular error
listed. What is wrong here? Thanks for the help
Angel
>-----Original Message-----
>Have a look at this walkthru:
>
>http://www.networkip.net/tidbits/woes.htm
>--
>
>
>-----------
>Got TidBits?
>Get it here: www.networkip.net/tidbits
>"Angel" <as****@hotmail .com> wrote in message
>news:07******* *************** ******@phx.gbl. ..
>> I am trying to debug a simple asp.net project using
>> Visual Studio.net(2002 ) and receive the following
error: >>
>> Error while tring to run project. Unable to start
>> debugging on the web server. Catastrophic failure.
Would >> you like to disable future attempts to debug ASP.NET
>> pages for this project?
>>
>> I am running windows 2000. I looked up this error in
the >> support section and found the error but without
>> the "catastroph ic failure". I tried to fix it with
the >> suggestions for the first part of the error to no
avail. >> HELP if anyone knows whats wrong here,
>>
>> Thanks,
>> Angel
>
>
>.
>
. This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics | |
by: Stephen Miller |
last post by:
Hi,
I am running v1.1.4322 on Win2K server and unable to debug a ASP.Net
application running locally, using a full URL (ie www.mysite.com).
When I hit F5, I get the following error message:
<debugger_error_message>
Error while trying to run project: Unable to start debugging on the
web server.
The project is not configured to be debugged.
|
by: |
last post by:
I'm starting up the development server myself and using the "Startup Url"
property of the web project. The problem is i cannot debug. The debug
symbols are never loaded. I realize they are under the temporary internet
files folder but I have even tried using the new depoloyment addin-in but
that does not seem to work either. There is a /bin folder with the debug
symboles in there but it still does not load them up
How can i include the...
|
by: Rena |
last post by:
Hi all,
I have created a app. project and a library which will be used by the
main project, however i do not know how to get into debug mode inside the
library, although break point is set. is there anywhere to enable the debug
mode into library class.
thanks
rena.
|
by: Epetruk |
last post by:
Hello,
In VS2003, I used to have two solutions - a debug and release solution.
Each solution had a webservice project and several other class library
projects. The webservice project referenced all the other class library
projects (i.e. so that it used the dll created when those other projects
were built).
The debug solution was configured so that all the projects in it had debug
|
by: Andrew Rowley |
last post by:
I am having trouble getting debug and release builds to work properly
with project references using C++ .NET and Visual Studio 2003.
I created a test solution, with a basic Windows form C++ project.
I then add a class library, and add a reference to this project in the
first project.
When I do a release build, I see the following in the output from the
DLL compile:
/OUT:"C:\Documents and Settings\Andrew\My Documents\Visual Studio
| | |
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look !
Part I. Meaning of...
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
|
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed.
This is as boiled down as I can make it.
Here is my compilation command:
g++-12 -std=c++20 -Wnarrowing bit_field.cpp
Here is the code in...
|
by: Hystou |
last post by:
Overview:
Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
|
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
| | |
by: adsilva |
last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
|
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
|
by: bsmnconsultancy |
last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...
| |
