is it possible to export multiple queries into one workbook, having
each query as separate worksheet? i cannot specify a range because the
records will change on a daily basis as for query size.
i tried the following transferspreads heet method but the database
could not find 'TFM$' because it was not a valid parameter.
DoCmd.TransferS preadsheet acExport, 8, "TFM",
"C:\Temp\NonCri tical.xls", True, "'TFM'!"
DoCmd.TransferS preadsheet acExport, 8, "STRUCTURED ",
"C:\Temp\NonCri tical.xls", True, "'STRUCTURE D'!"
DoCmd.TransferS preadsheet acExport, 8, "NRT",
"C:\Temp\NonCri tical.xls", True, "'NRT'!"
thanks in advance
jung 2 2541
I'm also doing this in one of my Access project.
Maybe you can just omit the last parameter from your codes, i.e., "TFM'!'",
"'STRUCTURED'!' ", "'NRT'!". I don't think these are necessary. The
worksheets will have names the same as the queries that are being exported.
Herbert
"JMCN" <pi******@yahoo .fr> ¦b¶l¥ó
news:27******** *************** **@posting.goog le.com ¤¤¼¶¼g... is it possible to export multiple queries into one workbook, having each query as separate worksheet? i cannot specify a range because the records will change on a daily basis as for query size. i tried the following transferspreads heet method but the database could not find 'TFM$' because it was not a valid parameter.
DoCmd.TransferS preadsheet acExport, 8, "TFM", "C:\Temp\NonCri tical.xls", True, "'TFM'!" DoCmd.TransferS preadsheet acExport, 8, "STRUCTURED ", "C:\Temp\NonCri tical.xls", True, "'STRUCTURE D'!" DoCmd.TransferS preadsheet acExport, 8, "NRT", "C:\Temp\NonCri tical.xls", True, "'NRT'!"
thanks in advance jung
"Herbert Chan" <he*****@chan.c om> wrote in message news:<40******* ***@rain.i-cable.com>... I'm also doing this in one of my Access project.
Maybe you can just omit the last parameter from your codes, i.e., "TFM'!'", "'STRUCTURED'!' ", "'NRT'!". I don't think these are necessary. The worksheets will have names the same as the queries that are being exported.
Herbert
thanks herber! you are totally correct! for some reason i thought i
needed to indicate the name of the worksheet even if i did not have a
range.
thanks again! cheers - jung This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics |
by: Dayron |
last post by:
Hi,
I would like export the records retrieved from database to excel
worksheets. unfortunately, each worksheet will support until 65535
records and I have about 1 million of records to write. So I have to
write into few worksheets in the same workbook. But I cant get the way
how to do it. I manage to create the new worksheet in my workbook but I
cannot write content into it. How can I do so?
Below is the example output source...
|
by: Makuhari1998 |
last post by:
Is it possible to create a macro that will open 7 reports at once and
automatically export the results of each report into Excel? Can the
results be exported into the same Excel workbook, or will they be in 7
different workbooks? Can I create a button on the main form of my
database to run this macro?
Also, is it possible to write a macro that can open several *queries*
at once and export them into Excel? If so, will the data labels of...
|
by: JMCN |
last post by:
is it possible to export multiple queries into one workbook, having
each query as separate worksheet? i cannot specify a range because the
records will change on a daily basis as for query size.
i tried the following transferspreadsheet method but the database
could not find 'TFM$' because it was not a valid parameter.
DoCmd.TransferSpreadsheet acExport, 8, "TFM",
"C:\Temp\NonCritical.xls", True, "'TFM'!"
DoCmd.TransferSpreadsheet...
|
by: Anthony Cuttitta Jr. |
last post by:
I'm working on some procedures where Access queries are exported to
Excel, and then later on, those same workbooks are openned, and I need
to target a specific original sheet. Sometimes there will be multiple
sheets in the same workbook, sometimes only a single tab.
The issue is this: Save query "XLTest - qryExport" to file and the
worksheet name becomes "XLTest___qryExport" (three underscores). I
have a generic procedure which...
|
by: paul.chae |
last post by:
I have a table in Access with about 3000 records. There are ~60 unique
values in the ID field for the 3000 records. What I would like to do
is automatically generate multiple Excel worksheets within a single
workbook with these records. I would end up with around 500
worksheets, 1 for each unique ID value. I was thinking this could be
done if I have an exported flag column in the table, and I search for
the max (or min) on the ID...
| |
by: Tony2299 |
last post by:
How to export data using ASP to excel workbook (with multiple worksheets)?
I created an excel workbook with 5 worksheets and each one has a name range.
Using asp I insert data to individual worksheet. The problem is that excel treat all numbers as string/text when I do:
rsExcel.Fields(0).Value = 5
When I open an excel file the value 5 is display as "5"
If I use application/vnd.ms-excel method I can get the value display correctly...
|
by: Vanessa |
last post by:
hi Everyone,
I have two questions on exporting data to Excel using ASP (w/o converting
formatted excel file into web page and then plug in the dynamic data):
1. Can we export data into different sheets at Excel?
2. Can we do graph at export?
Thanks!!
|
by: jmarcrum |
last post by:
I want to export a report (that contains two separate queries, 1. Current year data, and 2. split-year data) from access into excel, but everytime I run my code and export the data to excel, it looks like garbage.
I have maximize and minimize buttons on the left side of the excel spreadsheet that I don't want. I want separate tabs on the bottom of the spreadsheet that show the two queries separately from one another. But I don't know how...
|
by: bill |
last post by:
I have been searching everywhere AND am a bit new to vb .net/aspx, but can't
seem to find anything that works. Specifically, I need to export a dataset
from a webapp written in vb .net to a new excel spreadsheet with multiple
tabs (each tab would contain different rows from the dataset). Does anyone
have any sample code or examples I might look at?
tia,
Bill
|
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look !
Part I. Meaning of...
|
by: jinu1996 |
last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth.
The Art of Business Website Design
Your website is...
| |
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: conductexam |
last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one.
At the time of converting from word file to html my equations which are in the word document file was convert into image.
Globals.ThisAddIn.Application.ActiveDocument.Select();...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
|
by: adsilva |
last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
|
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
| |
by: bsmnconsultancy |
last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...
| |