Dear all,
Acess 2000. Here is may problem : i want to extract the path of
my DB without thr name of the DB file, something like
D:\MyFolder\ I use this code but the Instrrev line is not
accepted : error (5) and (I try to translate) : incorect argument
or or procedure call. What is wrong ? (References ?)
Private Sub Form_Open(Cance l As Integer)
Dim Bigpath As String
Dim SmallPath As String
Dim Slashloc As Integer
Bigpath = CurrentProject. FullName ' ok
Slashloc = InStrRev(Chemin Complet, "\", Len(Bigpath)) ' this line
failed (?), Len(bigpath) works
Path = Left(CheminComp let, Slashloc)
End Sub
Thank you
Alan--
_______________ _______________ ___
Site photo personnel : http://perso.wanadoo.fr/dimphoto 6 2504
I've had similar problems with string functions (specifically, strconv()),
and found that they had to do with the comparison type. You should check out
the optional compare argument in the InStrRev() function and look at this
posting on a problem with the defaults: http://www.trigeminal.com/usenet/usenet001.asp?1033
HTH,
Bruce Rusk
"Alain." <_@wanadoo.fr > wrote in message
news:bk******** **@news-reader1.wanadoo .fr... Dear all,
Acess 2000. Here is may problem : i want to extract the path of my DB without thr name of the DB file, something like D:\MyFolder\ I use this code but the Instrrev line is not accepted : error (5) and (I try to translate) : incorect argument or or procedure call. What is wrong ? (References ?)
Private Sub Form_Open(Cance l As Integer) Dim Bigpath As String Dim SmallPath As String Dim Slashloc As Integer
Bigpath = CurrentProject. FullName ' ok Slashloc = InStrRev(Chemin Complet, "\", Len(Bigpath)) ' this line failed (?), Len(bigpath) works Path = Left(CheminComp let, Slashloc) End Sub
Thank you Alan-- _______________ _______________ ___
Site photo personnel :
http://perso.wanadoo.fr/dimphoto
> Acess 2000. Here is may problem : i want to extract the path of my DB without thr name of the DB file, something like D:\MyFolder\ I use this code but the Instrrev line is not accepted : error (5) and (I try to translate) : incorect argument or or procedure call. What is wrong ? (References ?)
Try:
Application.Cur rentProject.Pat h
--
Bruce M. Thompson, Microsoft Access MVP bt******@mvps.o rg (See the Access FAQ at http://www.mvps.org/access) NO Email Please. Keep all communications
within the newsgroups so that all might benefit.<<
Thank you Bruce,
It works as I have rebooted the PC. I went on the Trigeminal site
and found the explanantion of the phenomenom.
But I still wonder which option is the best : should I use the
1036 LCID (France) or leave it with the "option Compare Database"
Your opinion ?
--
_______________ _______________ ___
Site photo personnel : http://perso.wanadoo.fr/dimphoto
"Alain." <_@wanadoo.fr > wrote in message news:<bk******* ***@news-reader1.wanadoo .fr>... Dear all,
Acess 2000. Here is may problem : i want to extract the path of my DB without thr name of the DB file, something like D:\MyFolder\ I use this code but the Instrrev line is not accepted : error (5) and (I try to translate) : incorect argument or or procedure call. What is wrong ? (References ?)
Private Sub Form_Open(Cance l As Integer) Dim Bigpath As String Dim SmallPath As String Dim Slashloc As Integer
Bigpath = CurrentProject. FullName ' ok Slashloc = InStrRev(Chemin Complet, "\", Len(Bigpath)) ' this line failed (?), Len(bigpath) works Path = Left(CheminComp let, Slashloc) End Sub
Alain, what is CheminComplet ?
It looks like a not initialized variable or some other global variable
not mentioned ..
shouldn't that be BigPath instead ?
Marc
Six of one, half a dozen of the other. :-)
--
MichKa [MS]
This posting is provided "AS IS" with
no warranties, and confers no rights.
"Alain." <_@wanadoo.fr > wrote in message
news:bk******** **@news-reader3.wanadoo .fr... Thank you Bruce,
It works as I have rebooted the PC. I went on the Trigeminal site and found the explanantion of the phenomenom. But I still wonder which option is the best : should I use the 1036 LCID (France) or leave it with the "option Compare Database"
Your opinion ?
-- _______________ _______________ ___
Site photo personnel :
http://perso.wanadoo.fr/dimphoto
This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics |
by: Bruce Davis |
last post by:
I'm having a problem on windows (both 2000 and XP) with a multi-threaded
tkinter gui application. The problem appears to be a deadlock condition
when a child thread pops up a
Pmw dialog window in the context of a main window. The problem does not
occur on HPUX or Linux. The following simple example code illustrates
the problem and the work around
I've come up with; However, I'd like, very much, to get rid of the kludgy
work around....
|
by: David Morgan |
last post by:
Hi
This is a really weird problem. We have a website that has been running for
about six months with no problems. We have recently moved it to a new
server with a new ISP. The server is of a much higher specification as is
the bandwidth etc. offered by the ISP.
The move went smoothly although some users are reporting problems with a
couple of ASPs that return large amounts of HTML e.g. 1181170 bytes (I just
checked or 13464 bytes...
|
by: Kostatus |
last post by:
I have a virtual function in a base class, which is then overwritten by a
function of the same name in a publically derived class. When I call the
function using a pointer to the derived class (ClassB* b; b->func(); ) the
base-class function is called instead of the new function in the derived
class. All other similar functions (virtual in the base class and
overwritten in the the derived class) work fine, it's just this one
function. ...
|
by: Peter Olcott |
last post by:
www.halting-problem.com
|
by: Jon Davis |
last post by:
If I have a class with a virtual method, and a child class that overrides
the virtual method, and then I create an instance of the child class AS A
base class...
BaseClass bc = new ChildClass();
.... and then call the virtual method, why is it that the base class's method
is called instead of the overridden method? How do I fix this if I don't
know at runtime what the child class is? I'm using
Activator.CreateInstance() to load the...
| |
by: Ammar |
last post by:
Dear All,
I'm facing a small problem.
I have a portal web site, that contains articles, for each article, the end
user can send a comment about the article.
The problem is:
I the comment length is more that 1249 bytes, then the progress bar of the
browser will move too slow and then displaying that the page not found!!!!
If the message is less than or equal to 1249 then no problem.
|
by: Dany |
last post by:
Our web service was working fine until we installed .net Framework 1.1 service pack 1. Uninstalling SP1 is not an option because our largest customer says service packs marked as "critical" by Microsoft must be installed on their servers.
Now german Umlaute (ä, ü, ö) and quotes are returned incorrectly in SOAP fault responses.
This can be easily verified:
Implement the following in a web service method (just raises a SOAPException with a...
|
by: Mike Collins |
last post by:
I cannot get the correct drop down list value from a drop down I have on my
web form. I get the initial value that was loaded in the list.
It was asked by someone else what the autopostback was set to...it is set to
false.
Can someone show me what I am doing wrong and tell me the correct way? Thank
you.
In the page load event, I am doing the following:
|
by: AceKnocks |
last post by:
I am working on a framework design problem in which I have to design a C++ based framework capable of solving three puzzles for now but actually it should work with a general puzzle of any kind and I need your able help in this activity.
Objective -
In this activity you will design a framework capable of solving any puzzle of a specific type and, as a test of this framework, use the framework to solve a very simple puzzle. In this first...
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
|
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed.
This is as boiled down as I can make it.
Here is my compilation command:
g++-12 -std=c++20 -Wnarrowing bit_field.cpp
Here is the code in...
| |
by: jinu1996 |
last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth.
The Art of Business Website Design
Your website is...
|
by: Hystou |
last post by:
Overview:
Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
|
by: adsilva |
last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
|
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
| |
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
| |