473,462 Members | 1,036 Online
Bytes | Software Development & Data Engineering Community
Create Post

Home Posts Topics Members FAQ

VB Express - worse than ever

I used the betas and they had lots of problems. Well the release is here
and is crap. I execute a program and then on second execute (no changes to
the source) and I get the following:

An error occurred creating the form. See Exception.InnerException for
details. The error is: Could not find any resources appropriate for the
specified culture or the neutral culture. Make sure
"ObjectShower.ObjectShower.resources" was correctly embedded or linked into
assembly "SMOExplorer" at compile time, or that all the satellite assemblies
required are loadable and fully signed.

This makes the term RAD an oxymoron as in VB is a RAD dev tool. Having to
reload VB Express on every execution is just beyond useless. I guess this
is MS way to get people to fork over big bucks.

Lloyd Sheen
Nov 23 '05 #1
5 1737
Sounds to me like you didn't get the betas completely off your system.
Reformatting is probably your best bet.

Mike Ober.

"Lloyd Sheen" <sq*******************@tostopspamhotmail.com> wrote in message
news:eZ********************@rogers.com...
I used the betas and they had lots of problems. Well the release is here
and is crap. I execute a program and then on second execute (no changes to the source) and I get the following:

An error occurred creating the form. See Exception.InnerException for
details. The error is: Could not find any resources appropriate for the
specified culture or the neutral culture. Make sure
"ObjectShower.ObjectShower.resources" was correctly embedded or linked into assembly "SMOExplorer" at compile time, or that all the satellite assemblies required are loadable and fully signed.

This makes the term RAD an oxymoron as in VB is a RAD dev tool. Having to reload VB Express on every execution is just beyond useless. I guess this
is MS way to get people to fork over big bucks.

Lloyd Sheen


Nov 23 '05 #2
New system so that is not it. The IDE behaves really badly. When it does
work it sends AutoHide windows up and down and the mouse is not even close
to where they are "hiding". Also a first execution does not allow
keystrokes on first breakpoint. Stop the execution and run again and it is
good. Does this remind anyone of the old adage about software? Get out the
car and then get back in again and try.

Not good enough.

Lloyd Sheen

"Michael D. Ober" <obermd.@.alum.mit.edu.nospam> wrote in message
news:eW**************@TK2MSFTNGP15.phx.gbl...
Sounds to me like you didn't get the betas completely off your system.
Reformatting is probably your best bet.

Mike Ober.

"Lloyd Sheen" <sq*******************@tostopspamhotmail.com> wrote in
message
news:eZ********************@rogers.com...
I used the betas and they had lots of problems. Well the release is here
and is crap. I execute a program and then on second execute (no changes

to
the source) and I get the following:

An error occurred creating the form. See Exception.InnerException for
details. The error is: Could not find any resources appropriate for the
specified culture or the neutral culture. Make sure
"ObjectShower.ObjectShower.resources" was correctly embedded or linked

into
assembly "SMOExplorer" at compile time, or that all the satellite

assemblies
required are loadable and fully signed.

This makes the term RAD an oxymoron as in VB is a RAD dev tool. Having

to
reload VB Express on every execution is just beyond useless. I guess
this
is MS way to get people to fork over big bucks.

Lloyd Sheen


Nov 23 '05 #3
Software's worse than that.

Get out of the car , get back in and try again but now the gears have
rearranged themselves and your engine is no longer compatible with the
gearbox.

Lloyd Sheen wrote:
New system so that is not it. The IDE behaves really badly. When it does
work it sends AutoHide windows up and down and the mouse is not even close
to where they are "hiding". Also a first execution does not allow
keystrokes on first breakpoint. Stop the execution and run again and it is
good. Does this remind anyone of the old adage about software? Get out the
car and then get back in again and try.

Not good enough.

Lloyd Sheen

"Michael D. Ober" <obermd.@.alum.mit.edu.nospam> wrote in message
news:eW**************@TK2MSFTNGP15.phx.gbl...
Sounds to me like you didn't get the betas completely off your system.
Reformatting is probably your best bet.

Mike Ober.

"Lloyd Sheen" <sq*******************@tostopspamhotmail.com> wrote in
message
news:eZ********************@rogers.com...
I used the betas and they had lots of problems. Well the release is here
and is crap. I execute a program and then on second execute (no changes


to
the source) and I get the following:

An error occurred creating the form. See Exception.InnerException for
details. The error is: Could not find any resources appropriate for the
specified culture or the neutral culture. Make sure
"ObjectShower.ObjectShower.resources" was correctly embedded or linked


into
assembly "SMOExplorer" at compile time, or that all the satellite


assemblies
required are loadable and fully signed.

This makes the term RAD an oxymoron as in VB is a RAD dev tool. Having


to
reload VB Express on every execution is just beyond useless. I guess
this
is MS way to get people to fork over big bucks.

Lloyd Sheen




--

Kind Regards

David Huisman
General Manager
-----------------------------------------------------------------------
ORBIT COMMUNICATIONS Pty Ltd - Wireless Solutions that Work
(Telemetry, Control, Monitoring, Security, HVAC ...)
A.C.N. 107 441 869
Website : http://www.orbitcoms.com
PO Box 4474 Lakehaven
NSW 2263, AUSTRALIA
Phone: 61-2-4393-3627
Fax : 61-2-4393-3685
Mobile: 61-413-715-986
Nov 23 '05 #4
LOL

I just saw the hidden window behaviour which just pushed out the properties
pane after I pushed the F10 button. This IDE makes VS 2003 (which I hate)
look like a great product. Maybe MS has a Web service available so we can
develop using the browser.

Get it together MS.

"David" <we******@orbitcoms.com> wrote in message
news:tL******************@news-server.bigpond.net.au...
Software's worse than that.

Get out of the car , get back in and try again but now the gears have
rearranged themselves and your engine is no longer compatible with the
gearbox.

Lloyd Sheen wrote:
New system so that is not it. The IDE behaves really badly. When it
does work it sends AutoHide windows up and down and the mouse is not even
close to where they are "hiding". Also a first execution does not allow
keystrokes on first breakpoint. Stop the execution and run again and it
is good. Does this remind anyone of the old adage about software? Get
out the car and then get back in again and try.

Not good enough.

Lloyd Sheen

"Michael D. Ober" <obermd.@.alum.mit.edu.nospam> wrote in message
news:eW**************@TK2MSFTNGP15.phx.gbl...
Sounds to me like you didn't get the betas completely off your system.
Reformatting is probably your best bet.

Mike Ober.

"Lloyd Sheen" <sq*******************@tostopspamhotmail.com> wrote in
message
news:eZ********************@rogers.com...

I used the betas and they had lots of problems. Well the release is
here
and is crap. I execute a program and then on second execute (no changes

to

the source) and I get the following:

An error occurred creating the form. See Exception.InnerException for
details. The error is: Could not find any resources appropriate for the
specified culture or the neutral culture. Make sure
"ObjectShower.ObjectShower.resources" was correctly embedded or linked

into

assembly "SMOExplorer" at compile time, or that all the satellite

assemblies

required are loadable and fully signed.

This makes the term RAD an oxymoron as in VB is a RAD dev tool. Having

to

reload VB Express on every execution is just beyond useless. I guess
this
is MS way to get people to fork over big bucks.

Lloyd Sheen




--

Kind Regards

David Huisman
General Manager
-----------------------------------------------------------------------
ORBIT COMMUNICATIONS Pty Ltd - Wireless Solutions that Work
(Telemetry, Control, Monitoring, Security, HVAC ...)
A.C.N. 107 441 869
Website : http://www.orbitcoms.com
PO Box 4474 Lakehaven
NSW 2263, AUSTRALIA
Phone: 61-2-4393-3627
Fax : 61-2-4393-3685
Mobile: 61-413-715-986

Nov 23 '05 #5
In case anyone at MS cares, I get the following call stack on the error.

It happens every time I terminate debugging. I then have to clean solution
and rebuild. Not exactly a RAD and is very similar to problem I had in VS
2003. Glad that progress is being made with this product NOT!!!

System.InvalidOperationException was unhandled
Message="An error occurred creating the form. See Exception.InnerException
for details. The error is: Could not find any resources appropriate for the
specified culture or the neutral culture. Make sure
\"ObjectShower.ObjectShower.resources\" was correctly embedded or linked
into assembly \"SMOExplorer\" at compile time, or that all the satellite
assemblies required are loadable and fully signed."
Source="SMOExplorer"
StackTrace:
at SMOExplorer.My.MyProject.MyForms.Create__Instance_ _[T](T Instance)
in 17d14f5c-a337-4978-8281-53493378c1071.vb:line 190
at SMOExplorer.My.MyProject.MyForms.get_MainForm()
at SMOExplorer.My.MyApplication.OnCreateMainForm() in C:\Documents
and Settings\Lloyd Sheen\My Documents\Visual
Studio\Projects\SMOExplorer\SMOExplorer\My
Project\Application.Designer.vb:line 34
at
Microsoft.VisualBasic.ApplicationServices.WindowsF ormsApplicationBase.OnRun()
at
Microsoft.VisualBasic.ApplicationServices.WindowsF ormsApplicationBase.DoApplicationModel()
at
Microsoft.VisualBasic.ApplicationServices.WindowsF ormsApplicationBase.Run(String[]
commandLine)
at SMOExplorer.My.MyApplication.Main(String[] Args) in
17d14f5c-a337-4978-8281-53493378c1071.vb:line 81
at System.AppDomain.nExecuteAssembly(Assembly assembly, String[]
args)
at System.AppDomain.ExecuteAssembly(String assemblyFile, Evidence
assemblySecurity, String[] args)
at Microsoft.VisualStudio.HostingProcess.HostProc.Run UsersAssembly()
at System.Threading.ThreadHelper.ThreadStart_Context( Object state)
at System.Threading.ExecutionContext.Run(ExecutionCon text
executionContext, ContextCallback callback, Object state)
at System.Threading.ThreadHelper.ThreadStart()

"Lloyd Sheen" <sq*******************@tostopspamhotmail.com> wrote in message
news:34********************@rogers.com...
LOL

I just saw the hidden window behaviour which just pushed out the
properties pane after I pushed the F10 button. This IDE makes VS 2003
(which I hate) look like a great product. Maybe MS has a Web service
available so we can develop using the browser.

Get it together MS.

"David" <we******@orbitcoms.com> wrote in message
news:tL******************@news-server.bigpond.net.au...
Software's worse than that.

Get out of the car , get back in and try again but now the gears have
rearranged themselves and your engine is no longer compatible with the
gearbox.

Lloyd Sheen wrote:
New system so that is not it. The IDE behaves really badly. When it
does work it sends AutoHide windows up and down and the mouse is not
even close to where they are "hiding". Also a first execution does not
allow keystrokes on first breakpoint. Stop the execution and run again
and it is good. Does this remind anyone of the old adage about
software? Get out the car and then get back in again and try.

Not good enough.

Lloyd Sheen

"Michael D. Ober" <obermd.@.alum.mit.edu.nospam> wrote in message
news:eW**************@TK2MSFTNGP15.phx.gbl...

Sounds to me like you didn't get the betas completely off your system.
Reformatting is probably your best bet.

Mike Ober.

"Lloyd Sheen" <sq*******************@tostopspamhotmail.com> wrote in
message
news:eZ********************@rogers.com...

>I used the betas and they had lots of problems. Well the release is
>here
>and is crap. I execute a program and then on second execute (no
>changes

to

>the source) and I get the following:
>
>An error occurred creating the form. See Exception.InnerException for
>details. The error is: Could not find any resources appropriate for
>the
>specified culture or the neutral culture. Make sure
>"ObjectShower.ObjectShower.resources" was correctly embedded or linked

into

>assembly "SMOExplorer" at compile time, or that all the satellite

assemblies

>required are loadable and fully signed.
>
>This makes the term RAD an oxymoron as in VB is a RAD dev tool.
>Having

to

>reload VB Express on every execution is just beyond useless. I guess
>this
>is MS way to get people to fork over big bucks.
>
>Lloyd Sheen
>
>
>



--

Kind Regards

David Huisman
General Manager
-----------------------------------------------------------------------
ORBIT COMMUNICATIONS Pty Ltd - Wireless Solutions that Work
(Telemetry, Control, Monitoring, Security, HVAC ...)
A.C.N. 107 441 869
Website : http://www.orbitcoms.com
PO Box 4474 Lakehaven
NSW 2263, AUSTRALIA
Phone: 61-2-4393-3627
Fax : 61-2-4393-3685
Mobile: 61-413-715-986


Nov 23 '05 #6

This thread has been closed and replies have been disabled. Please start a new discussion.

Similar topics

699
by: mike420 | last post by:
I think everyone who used Python will agree that its syntax is the best thing going for it. It is very readable and easy for everyone to learn. But, Python does not a have very good macro...
17
by: vendmacro | last post by:
I have just become aware of VS Express (http://msdn.microsoft.com/express). I currently own VS C++ .NET 2003 std ed and a new user of it and loving it. But what is this "Express"? Is it a FREE C++,...
13
by: johnb41 | last post by:
I'm testing out the Visual Basic 2005 Express Edition, and I like it thus far... but i'm puzzled. I want to add a "Setup Project" to my solution. When i go to Add Project, I don't see the...
1
by: Joaquin | last post by:
OK, I hate myself for asking this, it's the worst question I have ever asked but it's worse not to ask: ¿How do I update a datatable in vs 2005? I mean, I am using a typed dataset, a...
13
by: Miro | last post by:
Ok I have been slowely - and ever so slowely teaching myself VB.net Currently I have created an MDB file by code, and added fields to the MDB file by code. I like this solution because, ( im...
11
by: sumana_m | last post by:
I have downloaded the freely available express edition of Visual Web Developer. If I develop an application using this, will I be able to market my product for commercial purposes without having...
9
by: HC | last post by:
Hello, all, I started out thinking my problems were elsewhere but as I have worked through this I have isolated my problem, currently, as a difference between MSDE and SQL Express 2005 (I'll just...
25
by: Marco | last post by:
Hi everyone. I've been trying to move some small applications written in vb.net 2003 to vb.net 2005 express just for testing purposes. I have noticed so far that the applications seem to run ...
3
by: | last post by:
I'm planning to transport a desktop application to the web. A spin-off of this application has already been put on the web by another programmer. He used ColdFusion with MS SQL, Access, VC, and...
1
by: Sonnysonu | last post by:
This is the data of csv file 1 2 3 1 2 3 1 2 3 1 2 3 2 3 2 3 3 the lengths should be different i have to store the data by column-wise with in the specific length. suppose the i have to...
0
by: Hystou | last post by:
There are some requirements for setting up RAID: 1. The motherboard and BIOS support RAID configuration. 2. The motherboard has 2 or more available SATA protocol SSD/HDD slots (including MSATA, M.2...
0
marktang
by: marktang | last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However,...
1
by: Hystou | last post by:
Overview: Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows...
0
tracyyun
by: tracyyun | last post by:
Dear forum friends, With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each...
0
agi2029
by: agi2029 | last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing,...
0
isladogs
by: isladogs | last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM). In this session, we are pleased to welcome a new...
0
by: conductexam | last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and...
0
by: adsilva | last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?

By using Bytes.com and it's services, you agree to our Privacy Policy and Terms of Use.

To disable or enable advertisements and analytics tracking please visit the manage ads & tracking page.