Slightly surprised that the following didn't compile
#inclue <algorithm>
enum { C = 10 };
int main()
{
char a[C];
std::fill_n(a, C, '\0');
}
Error message points to implementation of std::fill_n and complains that
unary '--' : '' does not define this operator or a conversion to a type
acceptable to the predefined operator
Essentially I think its complaining that it can't modify the value of the
enum C.
Is this correct? I expected the template to be instantiated with an int
which could be modified using operator--.
Replacing enum { C = 10 }; with const int C = 10; does compile.
John 12 6137
On Tue, 15 Jul 2003, John Harrison wrote: Slightly surprised that the following didn't compile
#inclue <algorithm> enum { C = 10 }; int main() { char a[C]; std::fill_n(a, C, '\0'); }
Error message points to implementation of std::fill_n and complains that
unary '--' : '' does not define this operator or a conversion to a type acceptable to the predefined operator
Essentially I think its complaining that it can't modify the value of the enum C.
Is this correct? I expected the template to be instantiated with an int which could be modified using operator--.
Replacing enum { C = 10 }; with const int C = 10; does compile.
John
Your code, as above, compiles, as is, with gcc 3.2.2. Did you use fill()
instead of fill_n()?
"Jesse Nowells" <jn******@trans bay.net> wrote in message
news:Pine.BSF.4 .31.03071500531 30.80673-100000@localhos t...
On Tue, 15 Jul 2003, John Harrison wrote:
Slightly surprised that the following didn't compile
#inclue <algorithm> enum { C = 10 }; int main() { char a[C]; std::fill_n(a, C, '\0'); }
Error message points to implementation of std::fill_n and complains that
unary '--' : '' does not define this operator or a conversion to a type acceptable to the predefined operator
Essentially I think its complaining that it can't modify the value of
the enum C.
Is this correct? I expected the template to be instantiated with an int which could be modified using operator--.
Replacing enum { C = 10 }; with const int C = 10; does compile.
John
Your code, as above, compiles, as is, with gcc 3.2.2. Did you use fill() instead of fill_n()?
No I used code exactly as above, cut and paste from my compiler, except for
#include <algorithm> which I managed to mistype.
Compiler is VC++ .NET
john
"Alf P. Steinbach" <al***@start.no > wrote in message
news:3f******** ********@News.C IS.DFN.DE... On Tue, 15 Jul 2003 08:03:01 +0100, "John Harrison"
<jo************ *@hotmail.com> wrote:Slightly surprised that the following didn't compile
#inclue <algorithm> Hah, there's your culprit right there. ;-)
The rest of the code was cut and paste, I swear!
enum { C = 10 }; int main() { char a[C]; std::fill_n(a, C, '\0'); }
Error message points to implementation of std::fill_n and complains that
unary '--' : '' does not define this operator or a conversion to a type acceptable to the predefined operator
enum E{ C = 10 };
E operator--( E x ){ return static_cast<E>( x-1 ); } Essentially I think its complaining that it can't modify the value of the enum C.
Nope. It complains that enum type doesn't have a decrement operator.
So presumably this would also compile (don't have my compiler handy to
check)
enum { C = 10 };
int main()
{
char a[C];
std::fill_n(a, (int)C, '\0');
}
john
On Tue, 15 Jul 2003 09:34:34 +0100, "John Harrison" <jo************ *@hotmail.com> wrote: So presumably this would also compile (don't have my compiler handy to check)
enum { C = 10 }; int main() { char a[C]; std::fill_n(a, (int)C, '\0'); }
It does.
What happens if the give the enum type a name? This made it fail to compile
with BCB4.
Fraser.
John Harrison wrote: Essentially I think its complaining that it can't modify the value of the enum C.
Is this correct? I expected the template to be instantiated with an int which could be modified using operator--.
There is no rule excluding enum types from being the first class
citizens when it comes to instantiation of templates.
There is another issue with calling -- on enum types. According to the
C++ standard (5.3.2) one can call the (built-in) prefix operator ++ or
-- on a operand being an lvalue of an arithmetic or pointer to
completely-defined object type. No enum is mentioned in this context
however it is when i.e., the unary +/- operators are discussed.
Nevertheless many compilers will accept such an operation mainly because
of their own backward compatibility so it may be really hard to spot.
Regards,
Janusz
On Tue, 15 Jul 2003 09:33:50 -0400, "Ron Natalie" <ro*@sensor.com > wrote: "Alf P. Steinbach" <al***@start.no > wrote in message news:3f******** ********@News.C IS.DFN.DE...
E operator--( E x ){ return static_cast<E>( x-1 ); }
-x is not x-1
E is not necessarily able to hold the value -10. Nope. It complains that enum type doesn't have a decrement operator.
No it complains about UNARY -.
Hello? Anyone home today, Ron? Must be the heat.
John Harrison wrote: That's very strange because since enums are often used for ordinal types you would think that if any arithmetic operators were to be defined then it would be ++ and --. Just an oversight I guess.
Nope, deliberate. We didn't want to require compiler writers to generate
increment and decrement code for things like this:
enum flags { 0x01, 0x02, 0x04, 0x08, 0x10 };
--
"To delight in war is a merit in the soldier,
a dangerous quality in the captain, and a
positive crime in the statesman."
George Santayana
"Bring them on."
George W. Bush
John Harrison wrote: "Pete Becker" <pe********@acm .org> wrote in message news:3F******** *******@acm.org ... John Harrison wrote: That's very strange because since enums are often used for ordinal types you would think that if any arithmetic operators were to be defined then it would be ++ and --. Just an oversight I guess.
Nope, deliberate. We didn't want to require compiler writers to generate increment and decrement code for things like this:
enum flags { 0x01, 0x02, 0x04, 0x08, 0x10 };
OK I can buy that but then why define unary minus?
--, ++, +=, etc. all must create values of the same type as their
operand. Unary minus, as well as the rest of the arithmetic operators,
create integral values. Read about the "usual arithmetic conversions."
--
"To delight in war is a merit in the soldier,
a dangerous quality in the captain, and a
positive crime in the statesman."
George Santayana
"Bring them on."
George W. Bush This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics |
by: Joachim |
last post by:
I made some project changes (which seems it doesn't help if I undo) which
have created compilation error:
"
Server Error in '/PCSWebApp1' Application.
--------------------------------------------------------------------------------
Compilation Error
Description: An error occurred during the compilation of a resource required
to service this request. Please review the following specific error details
|
by: James Zhuo |
last post by:
Hi all
I've been getting the following compilation error. I should explain the
background of the project that i am taking over. This is a project that has
been developed by someone else a while ago using dreamweaver, I am basically
trying to migrate the project into a Visual Studio .NET environment before I
start enhancing it.
Any suggestions on where the source of error may be would be greatly
appreciated.
|
by: James Zhuo |
last post by:
hi all
I changed the name of the class LoginPage to a different
name "LoginPageOne" But the same error gets generated with
the Wiliam.Request.LoginPageOne. That pretty much leaves
me clueless at this point.
Please help
Cheer
|
by: Jie |
last post by:
Does anyone know why I keep having the following error. I have to rebuild
the solution every time I run it in design mode. thanks
jie
Server Error in '/ReapPortal' Application.
----------------------------------------------------------------------------
----
Compilation Error
|
by: John |
last post by:
Hi,
I've just rolled out a new version of an ASP.NET application. It runs fine
on development and training servers, but on production get the following
error when trying to access a page:
Compilation Error
Description: An error occurred during the compilation of a resource required
to service this request. Please review the following specific error details
| |
by: VB Programmer |
last post by:
I created a ASP.NET app locally and it works great. Uploaded it to my
server and I get this error when trying to view a page. Any ideas?
Server Error in '/earlyalert3' Application.
----------------------------------------------------------------------------
----
Compilation Error
|
by: Kevin R. |
last post by:
I have been ignoring this problem for a few weeks now, but it's becoming
a bit annoying not to mention unproductive. Here it goes:
I compile my project with no errors. Then after I debug/run it, I get
the runtime error noted at the end of this message. If I re-compile
(without any changes) and re-run, then my project will run OK. This
behavior is very consistent. Another words, the only way I can run an
ASP.NET application is if I...
|
by: Plat |
last post by:
I've Googled this for a while, to no avail. Hopefully someone can help me.
Maybe I'm using the wrong terminology.
Here's the scoop! Let's say I've got a simple *.ASPX page that has a syntax
error. For example, broken.aspx might only contain the following line of code:
<% Dim x as %>
When I visit this page from my Web browser, I see all the helpful ASP.NET
Server Error information, including:
|
by: Stimp |
last post by:
I've created an aspx page called HistoryManage.aspx.
The page works fine on my local machine but when I load it off the web I
get the following strange error...
Compilation Error
Description: An error occurred during the compilation of a resource
required to service this request. Please review the following specific
error details and modify your source code appropriately.
|
by: BSand0764 |
last post by:
I'm getting an error that I can't seem to resolve. When I compile the
Functor related logic in a test program, the files compile and execute
properly (see Listing #1).
However, when I incorporate the same logic within my simulation, the
class that implements the functor logic has problems compiling. I get
the following errors:
-- Building myTest.cpp --
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
| |
by: jinu1996 |
last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth.
The Art of Business Website Design
Your website is...
|
by: Hystou |
last post by:
Overview:
Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: conductexam |
last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one.
At the time of converting from word file to html my equations which are in the word document file was convert into image.
Globals.ThisAddIn.Application.ActiveDocument.Select();...
|
by: adsilva |
last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
| |
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
|
by: bsmnconsultancy |
last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...
| |