Hello,
I am using a beginners book on VB .net and already stumped....when using
this code (below) , it will tell me that MsgBox is not valid. This is a very
simple program and I can't figure out what the problem is:
Public Class Form1
Inherits System.Windows.Forms.Form
#Region " Windows Form Designer generated code "
Public Sub New()
MyBase.New()
'This call is required by the Windows Form Designer.
InitializeComponent()
'Add any initialization after the InitializeComponent() call
End Sub
'Form overrides dispose to clean up the component list.
Protected Overloads Overrides Sub Dispose(ByVal disposing As Boolean)
If disposing Then
If Not (components Is Nothing) Then
components.Dispose()
End If
End If
MyBase.Dispose(disposing)
End Sub
'Required by the Windows Form Designer
Private components As System.ComponentModel.IContainer
'NOTE: The following procedure is required by the Windows Form Designer
'It can be modified using the Windows Form Designer.
'Do not modify it using the code editor.
<System.Diagnostics.DebuggerStepThrough()> Private Sub InitializeComponent()
'
'Form1
'
Me.AutoScaleBaseSize = New System.Drawing.Size(5, 13)
Me.ClientSize = New System.Drawing.Size(292, 266)
Me.Name = "Form1"
Me.Text = "Form1"
End Sub
#End Region
Private Sub Form1_Load(ByVal sender As System.Object, _
ByVal e As System.EventArgs) Handles MyBase.Load
MsgBox("Hi There")
End
End Sub
End Class 6 1371
MsgBox has changed in VB.NET it is now: MessageBox.Show("")
Hope this helps
Matt.
"Brian" <br***********@yahoo.com> wrote in message
news:%2****************@TK2MSFTNGP09.phx.gbl... Hello,
I am using a beginners book on VB .net and already stumped....when using this code (below) , it will tell me that MsgBox is not valid. This is a very simple program and I can't figure out what the problem is:
Public Class Form1
Inherits System.Windows.Forms.Form
#Region " Windows Form Designer generated code "
Public Sub New()
MyBase.New()
'This call is required by the Windows Form Designer.
InitializeComponent()
'Add any initialization after the InitializeComponent() call
End Sub
'Form overrides dispose to clean up the component list.
Protected Overloads Overrides Sub Dispose(ByVal disposing As Boolean)
If disposing Then
If Not (components Is Nothing) Then
components.Dispose()
End If
End If
MyBase.Dispose(disposing)
End Sub
'Required by the Windows Form Designer
Private components As System.ComponentModel.IContainer
'NOTE: The following procedure is required by the Windows Form Designer
'It can be modified using the Windows Form Designer.
'Do not modify it using the code editor.
<System.Diagnostics.DebuggerStepThrough()> Private Sub InitializeComponent()
'
'Form1
'
Me.AutoScaleBaseSize = New System.Drawing.Size(5, 13)
Me.ClientSize = New System.Drawing.Size(292, 266)
Me.Name = "Form1"
Me.Text = "Form1"
End Sub
#End Region
Private Sub Form1_Load(ByVal sender As System.Object, _
ByVal e As System.EventArgs) Handles MyBase.Load
MsgBox("Hi There")
End
End Sub
End Class
That's interesting because in an application I made before using this book,
MsgBox worked and this book seems to use MsgBox throughout and it is a
VB.NET book.
"Matt S" <ma**@toomuchspamalready.com> wrote in message
news:OP****************@tk2msftngp13.phx.gbl... MsgBox has changed in VB.NET it is now: MessageBox.Show("")
Hope this helps
Matt.
"Brian" <br***********@yahoo.com> wrote in message news:%2****************@TK2MSFTNGP09.phx.gbl... Hello,
I am using a beginners book on VB .net and already stumped....when using this code (below) , it will tell me that MsgBox is not valid. This is a very simple program and I can't figure out what the problem is:
Public Class Form1
Inherits System.Windows.Forms.Form
#Region " Windows Form Designer generated code "
Public Sub New()
MyBase.New()
'This call is required by the Windows Form Designer.
InitializeComponent()
'Add any initialization after the InitializeComponent() call
End Sub
'Form overrides dispose to clean up the component list.
Protected Overloads Overrides Sub Dispose(ByVal disposing As Boolean)
If disposing Then
If Not (components Is Nothing) Then
components.Dispose()
End If
End If
MyBase.Dispose(disposing)
End Sub
'Required by the Windows Form Designer
Private components As System.ComponentModel.IContainer
'NOTE: The following procedure is required by the Windows Form Designer
'It can be modified using the Windows Form Designer.
'Do not modify it using the code editor.
<System.Diagnostics.DebuggerStepThrough()> Private Sub InitializeComponent()
'
'Form1
'
Me.AutoScaleBaseSize = New System.Drawing.Size(5, 13)
Me.ClientSize = New System.Drawing.Size(292, 266)
Me.Name = "Form1"
Me.Text = "Form1"
End Sub
#End Region
Private Sub Form1_Load(ByVal sender As System.Object, _
ByVal e As System.EventArgs) Handles MyBase.Load
MsgBox("Hi There")
End
End Sub
End Class
MsgBox is a VB function and is still valid in VB .NET. However, this
function requires importing the Microsoft.VisualBasic namespace. By default,
this namespace is added to all newly created projects. (Project -->
myproject properties --> Common Properties --> Imports). So you should be
able to use this function by default. If its throwing up an error, you might
want to check whether you have the namespace included. However, as Matt
suggested, you might want to use MessageBox.Show instead (I believe it has
more options).
hope that helps..
Imran.
"Brian" <br***********@yahoo.com> wrote in message
news:uy****************@tk2msftngp13.phx.gbl... That's interesting because in an application I made before using this
book, MsgBox worked and this book seems to use MsgBox throughout and it is a VB.NET book.
"Matt S" <ma**@toomuchspamalready.com> wrote in message news:OP****************@tk2msftngp13.phx.gbl... MsgBox has changed in VB.NET it is now: MessageBox.Show("")
Hope this helps
Matt.
"Brian" <br***********@yahoo.com> wrote in message news:%2****************@TK2MSFTNGP09.phx.gbl... Hello,
I am using a beginners book on VB .net and already stumped....when
using this code (below) , it will tell me that MsgBox is not valid. This is a very simple program and I can't figure out what the problem is:
Public Class Form1
Inherits System.Windows.Forms.Form
#Region " Windows Form Designer generated code "
Public Sub New()
MyBase.New()
'This call is required by the Windows Form Designer.
InitializeComponent()
'Add any initialization after the InitializeComponent() call
End Sub
'Form overrides dispose to clean up the component list.
Protected Overloads Overrides Sub Dispose(ByVal disposing As Boolean)
If disposing Then
If Not (components Is Nothing) Then
components.Dispose()
End If
End If
MyBase.Dispose(disposing)
End Sub
'Required by the Windows Form Designer
Private components As System.ComponentModel.IContainer
'NOTE: The following procedure is required by the Windows Form Designer
'It can be modified using the Windows Form Designer.
'Do not modify it using the code editor.
<System.Diagnostics.DebuggerStepThrough()> Private Sub InitializeComponent()
'
'Form1
'
Me.AutoScaleBaseSize = New System.Drawing.Size(5, 13)
Me.ClientSize = New System.Drawing.Size(292, 266)
Me.Name = "Form1"
Me.Text = "Form1"
End Sub
#End Region
Private Sub Form1_Load(ByVal sender As System.Object, _
ByVal e As System.EventArgs) Handles MyBase.Load
MsgBox("Hi There")
End
End Sub
End Class
what is the *exact* message u r getting ?
msgbox() DOES exist in VB.NET
"Matt S" <ma**@toomuchspamalready.com> a écrit dans le message de news:
OP****************@tk2msftngp13.phx.gbl... MsgBox has changed in VB.NET it is now: MessageBox.Show("")
Hope this helps
Matt.
"Brian" <br***********@yahoo.com> wrote in message news:%2****************@TK2MSFTNGP09.phx.gbl... Hello,
I am using a beginners book on VB .net and already stumped....when using this code (below) , it will tell me that MsgBox is not valid. This is a very simple program and I can't figure out what the problem is:
Public Class Form1
Inherits System.Windows.Forms.Form
#Region " Windows Form Designer generated code "
Public Sub New()
MyBase.New()
'This call is required by the Windows Form Designer.
InitializeComponent()
'Add any initialization after the InitializeComponent() call
End Sub
'Form overrides dispose to clean up the component list.
Protected Overloads Overrides Sub Dispose(ByVal disposing As Boolean)
If disposing Then
If Not (components Is Nothing) Then
components.Dispose()
End If
End If
MyBase.Dispose(disposing)
End Sub
'Required by the Windows Form Designer
Private components As System.ComponentModel.IContainer
'NOTE: The following procedure is required by the Windows Form Designer
'It can be modified using the Windows Form Designer.
'Do not modify it using the code editor.
<System.Diagnostics.DebuggerStepThrough()> Private Sub InitializeComponent()
'
'Form1
'
Me.AutoScaleBaseSize = New System.Drawing.Size(5, 13)
Me.ClientSize = New System.Drawing.Size(292, 266)
Me.Name = "Form1"
Me.Text = "Form1"
End Sub
#End Region
Private Sub Form1_Load(ByVal sender As System.Object, _
ByVal e As System.EventArgs) Handles MyBase.Load
MsgBox("Hi There")
End
End Sub
End Class
It gives me the squiggly underline and says:
"MsgBox is a namespace, and so it is not a valid expression"
But when I open a previous solution with MsgBox it doesn't give me this
error..suggestions?
"steve" <noemail.@try.com> wrote in message
news:Gr*******************@weber.videotron.net... what is the *exact* message u r getting ?
msgbox() DOES exist in VB.NET
"Matt S" <ma**@toomuchspamalready.com> a écrit dans le message de news: OP****************@tk2msftngp13.phx.gbl... MsgBox has changed in VB.NET it is now: MessageBox.Show("")
Hope this helps
Matt.
"Brian" <br***********@yahoo.com> wrote in message news:%2****************@TK2MSFTNGP09.phx.gbl... Hello,
I am using a beginners book on VB .net and already stumped....when using this code (below) , it will tell me that MsgBox is not valid. This is a very simple program and I can't figure out what the problem is:
Public Class Form1
Inherits System.Windows.Forms.Form
#Region " Windows Form Designer generated code "
Public Sub New()
MyBase.New()
'This call is required by the Windows Form Designer.
InitializeComponent()
'Add any initialization after the InitializeComponent() call
End Sub
'Form overrides dispose to clean up the component list.
Protected Overloads Overrides Sub Dispose(ByVal disposing As Boolean)
If disposing Then
If Not (components Is Nothing) Then
components.Dispose()
End If
End If
MyBase.Dispose(disposing)
End Sub
'Required by the Windows Form Designer
Private components As System.ComponentModel.IContainer
'NOTE: The following procedure is required by the Windows Form Designer
'It can be modified using the Windows Form Designer.
'Do not modify it using the code editor.
<System.Diagnostics.DebuggerStepThrough()> Private Sub InitializeComponent()
'
'Form1
'
Me.AutoScaleBaseSize = New System.Drawing.Size(5, 13)
Me.ClientSize = New System.Drawing.Size(292, 266)
Me.Name = "Form1"
Me.Text = "Form1"
End Sub
#End Region
Private Sub Form1_Load(ByVal sender As System.Object, _
ByVal e As System.EventArgs) Handles MyBase.Load
MsgBox("Hi There")
End
End Sub
End Class
had a "duh" moment...the book made you name the solution the same as MsgBox
and that is a no no..figured it out.
Thanks!
"Brian" <br***********@yahoo.com> wrote in message
news:%2****************@TK2MSFTNGP09.phx.gbl... Hello,
I am using a beginners book on VB .net and already stumped....when using this code (below) , it will tell me that MsgBox is not valid. This is a very simple program and I can't figure out what the problem is:
Public Class Form1
Inherits System.Windows.Forms.Form
#Region " Windows Form Designer generated code "
Public Sub New()
MyBase.New()
'This call is required by the Windows Form Designer.
InitializeComponent()
'Add any initialization after the InitializeComponent() call
End Sub
'Form overrides dispose to clean up the component list.
Protected Overloads Overrides Sub Dispose(ByVal disposing As Boolean)
If disposing Then
If Not (components Is Nothing) Then
components.Dispose()
End If
End If
MyBase.Dispose(disposing)
End Sub
'Required by the Windows Form Designer
Private components As System.ComponentModel.IContainer
'NOTE: The following procedure is required by the Windows Form Designer
'It can be modified using the Windows Form Designer.
'Do not modify it using the code editor.
<System.Diagnostics.DebuggerStepThrough()> Private Sub InitializeComponent()
'
'Form1
'
Me.AutoScaleBaseSize = New System.Drawing.Size(5, 13)
Me.ClientSize = New System.Drawing.Size(292, 266)
Me.Name = "Form1"
Me.Text = "Form1"
End Sub
#End Region
Private Sub Form1_Load(ByVal sender As System.Object, _
ByVal e As System.EventArgs) Handles MyBase.Load
MsgBox("Hi There")
End
End Sub
End Class This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics
by: Patchwork |
last post by:
Hi Everyone,
Please take a look at the following (simple and fun) program:
////////////////////////////////////////////////////////////////////////////
/////////////
// Monster Munch, example...
|
by: Proteus |
last post by:
Any help appreciated on a small perl project I need to write for
educator/teaching purposes. I have not programmed perl for some time, need
to get up to speed, maybe some kind souls hrere will help...
|
by: Raskolnikow |
last post by:
Hi!
I have a very simple problem with itoa() or the localtime(...).
Sorry, if it is too simple, I don't have a proper example.
Please have a look at the comments.
struct tm *systime;
time_t...
|
by: Peter |
last post by:
Hello
Thanks for reviewing my question. I would like to know how can I programmatically select a node
Thanks in Advanc
Peter
|
by: abcd |
last post by:
I am trying to set up client machine and investigatging which .net
components are missing to run aspx page.
I have a simple aspx page which just has "hello world" printed....
When I request...
|
by: dba_222 |
last post by:
Dear Experts,
Ok, I hate to ask such a seemingly dumb question, but I've
already spent far too much time on this. More that I
would care to admit.
In Sql server, how do I simply change a...
|
by: Giancarlo Berenz |
last post by:
Hi:
Recently i write this code:
class Simple
{
private:
int value;
public:
int GiveMeARandom(void);
|
by: galiorenye |
last post by:
Hi,
Given this code:
A** ppA = new A*;
A *pA = NULL;
for(int i = 0; i < 10; ++i)
{
pA = ppA;
//do something with pA
|
by: Phillip Taylor |
last post by:
Hi guys, I'm looking to develop a simple web service in VB.NET but I'm
having some trivial issues. In Visual Studio I create a web services
project and change the asmx.vb file to this:
Imports...
|
by: Chris M. Thomasson |
last post by:
I use the following technique in all of my C++ projects; here is the example
code with error checking omitted for brevity:
_________________________________________________________________
/*...
|
by: isladogs |
last post by:
The next Access Europe meeting will be on Wednesday 2 August 2023 starting at 18:00 UK time (6PM UTC+1) and finishing at about 19:15 (7.15PM)
The start time is equivalent to 19:00 (7PM) in Central...
|
by: erikbower65 |
last post by:
Using CodiumAI's pr-agent is simple and powerful. Follow these steps:
1. Install CodiumAI CLI: Ensure Node.js is installed, then run 'npm install -g codiumai' in the terminal.
2. Connect to...
|
by: linyimin |
last post by:
Spring Startup Analyzer generates an interactive Spring application startup report that lets you understand what contributes to the application startup time and helps to optimize it. Support for...
|
by: kcodez |
last post by:
As a H5 game development enthusiast, I recently wrote a very interesting little game - Toy Claw ((http://claw.kjeek.com/))。Here I will summarize and share the development experience here, and hope it...
|
by: isladogs |
last post by:
The next Access Europe meeting will be on Wednesday 6 Sept 2023 starting at 18:00 UK time (6PM UTC+1) and finishing at about 19:15 (7.15PM)
The start time is equivalent to 19:00 (7PM) in Central...
|
by: Taofi |
last post by:
I try to insert a new record but the error message says the number of query names and destination fields are not the same
This are my field names
ID, Budgeted, Actual, Status and Differences
...
|
by: DJRhino |
last post by:
Private Sub CboDrawingID_BeforeUpdate(Cancel As Integer)
If = 310029923 Or 310030138 Or 310030152 Or 310030346 Or 310030348 Or _
310030356 Or 310030359 Or 310030362 Or...
|
by: lllomh |
last post by:
How does React native implement an English player?
|
by: DJRhino |
last post by:
Was curious if anyone else was having this same issue or not....
I was just Up/Down graded to windows 11 and now my access combo boxes are not acting right. With win 10 I could start typing...
| |